How Many Use The DashLogic on there ZL1? - Page 15 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

vatechguy3 · 11-09-2014, 06:54 PM

On the fence about one.

I do not have NAV. Does that make a difference?

Tony

Vick415 · 11-09-2014, 07:39 PM

Is it possible to monitor Methanol injection system? Pump system and or loss of it ?

Sent from my iPad using Tapatalk

Bigtime53 · 11-09-2014, 07:43 PM

Quote:

Originally Posted by vatechguy3

On the fence about one.

I do not have NAV. Does that make a difference?

Tony

I do not have NAV either. So no it does not make a difference.

revobasher · 01-06-2015, 10:35 PM

Just got mine.. 13' ZL1 and flashed with the latest 1.18 firmware (had 1.13 installed).. haven't plugged it into the car yet.. how have you guys modified the profiles, if at all?

Bigtime53 · 01-06-2015, 11:28 PM

Quote:

Originally Posted by Vick415

Is it possible to monitor Methanol injection system? Pump system and or loss of it ?

Sent from my iPad using Tapatalk

No it will not do this.

Camero5 · 01-07-2015, 06:34 AM

Quote:

Originally Posted by revobasher

Just got mine.. 13' ZL1 and flashed with the latest 1.18 firmware (had 1.13 installed).. haven't plugged it into the car yet.. how have you guys modified the profiles, if at all?

I've modified most of the profiles. There are too many profiles and pages than I need. I mainly monitor timing, knock, boost, and temps. Also have one just for instant fuel/throttle %.

You can also do this for fun ;-) it's very easy, just delete the line and add your own text in advance mode. . You can also re-add the lines in their software very easily.

Name: ImageUploadedByTapatalk1420630418.441879.jpg
Views: 781
Size: 190.2 KB

Name: ImageUploadedByTapatalk1420630418.441879.jpg
Views: 781
Size: 190.2 KB

Name: ImageUploadedByTapatalk1420630568.182938.jpg
Views: 755
Size: 262.1 KB

Camero5 · 01-07-2015, 06:40 AM

Quote:

Originally Posted by Vick415

Is it possible to monitor Methanol injection system? Pump system and or loss of it ?

Sent from my iPad using Tapatalk

It only displays data provided to it by our ECU. It does have an advanced option to create your own calculations using the data but you will not be able monitor the methanol injection system. You might ask Palmer and see if they have a separate system that can plug into the dash logic for that. I know they have several sensors that attach to the dash logic system to allow the display of that data.

revobasher · 01-07-2015, 07:46 AM

Quote:

Originally Posted by Camero5

I've modified most of the profiles. There are too many profiles and pages than I need. I mainly monitor timing, knock, boost, and temps. Also have one just for instant fuel/throttle %.

You can also do this for fun ;-) it's very easy, just delete the line and add your own text in advance mode. . You can also re-add the lines in their software very easily.

Attachment 685364
Attachment 685367

Ha! Awesome

KaBoom1701 · 01-07-2015, 10:59 AM

I just starting playing with it yesterday.

Almost too many screens to set up.

I only have one profile used so far...

Camero5 · 01-07-2015, 11:53 AM

Quote:

Originally Posted by KaBoom1701

I just starting playing with it yesterday.

Almost too many screen to set up.

I only have one profile used so far...

Same here. I used one profile only.

Unreal · 01-07-2015, 12:47 PM

Quote:

Originally Posted by Bigtime53

No it will not do this.

Yes it can. You can do it in a few different ways.

Bigtime53 · 01-07-2015, 04:51 PM

Quote:

Originally Posted by Unreal

Yes it can. You can do it in a few different ways.

Well if it can please explain to him how to do it. Hell,explain it to me also because I was not aware it would do it.

Unreal · 01-07-2015, 05:00 PM

There are a few ways to do it. You can have it warn off the IAT sensor since with the meth working the IATs will stay under a set level. Or you can get a flow sensor and put it inline and monitor actual meth flow, or put a pressure sensor on the line and warn off pressure. Then program in whatever you want. If Throttle>80% RPM>3000 and Meth PSI<80 display "WARNING METH FAILURE".

IAT method would be the only one that doesn't require extra parts, but the great thing about the dashlogic is the expandability and ability to take sensor inputs.

You could also easily do it off AFR gauge since meth will richen it up, set the warning so with meth off it will display a meth warning, and meth on it won't based off AFR over RPM range.

Bigtime53 · 01-07-2015, 08:28 PM

If you had a flow sensor or a pressure sensor where would you connect the wires to? I just do not see how this would work? The computer on the car does not have that option now and I know there are no idiot lights for that so educate me on this.

11-09-2014, 06:54 PM	#197
vatechguy3 Drives: 2014 ZL1 M6 Join Date: Jul 2014 Location: Virginia Posts: 493	On the fence about one. I do not have NAV. Does that make a difference? Tony __________________ 2014 ZL1 M6 Bone stock, for now! 2001 Z28 M6 !cags, !air, FTP 85mm Lid, Z06 85mm MAF, P&P TB !4x4, Strano Springs, Strano Sways, Koni 4/4s, Watts Link ARH LTs, ARH catted Y, SLP catback with Dual/Dual Muffler, SLP CME and Valance OE Wheels Machined Face C5 DDs, 18x10.5s, with 295/35-18s on all 4 corners! 352rwhp and 366rwtq

01-06-2015, 10:35 PM	#200
revobasher Drives: 2013 ZL1 Join Date: Oct 2014 Location: Blaine, MN Posts: 552	Just got mine.. 13' ZL1 and flashed with the latest 1.18 firmware (had 1.13 installed).. haven't plugged it into the car yet.. how have you guys modified the profiles, if at all? __________________ -- 2013 ZL1 - Blue Ray Metallic JDP 850 Package 740hp/700tq @14lbs on E85 Build Thread

01-07-2015, 10:59 AM	#205
KaBoom1701 KaBoom1701 Drives: 13' ZL1 Red M6 Join Date: Dec 2012 Location: I.E. SoCal (Yucaipa) Posts: 8,631	I just starting playing with it yesterday. Almost too many screens to set up. I only have one profile used so far... __________________ Mods: Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats. Last edited by KaBoom1701; 01-13-2015 at 04:40 PM.

01-07-2015, 05:00 PM	#209
Unreal Drives: 2006 Z06 Join Date: Oct 2010 Location: Gilbert, AZ Posts: 5,712	There are a few ways to do it. You can have it warn off the IAT sensor since with the meth working the IATs will stay under a set level. Or you can get a flow sensor and put it inline and monitor actual meth flow, or put a pressure sensor on the line and warn off pressure. Then program in whatever you want. If Throttle>80% RPM>3000 and Meth PSI<80 display "WARNING METH FAILURE". IAT method would be the only one that doesn't require extra parts, but the great thing about the dashlogic is the expandability and ability to take sensor inputs. You could also easily do it off AFR gauge since meth will richen it up, set the warning so with meth off it will display a meth warning, and meth on it won't based off AFR over RPM range. __________________ Nick Corvette Z06 -1200ish rwhp

11-09-2014, 07:39 PM	#198
Vick415 Drives: 2014 ZL1 Join Date: Aug 2014 Location: SF Bay Area, California Posts: 180 View My Garage	Is it possible to monitor Methanol injection system? Pump system and or loss of it ? Sent from my iPad using Tapatalk

01-07-2015, 08:28 PM	#210
Bigtime53 Drives: 2013 ZL1 Join Date: Mar 2013 Location: Oklahoma Posts: 2,326	If you had a flow sensor or a pressure sensor where would you connect the wires to? I just do not see how this would work? The computer on the car does not have that option now and I know there are no idiot lights for that so educate me on this.