Vitesse throttle controller - Page 39 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

crazy82012 · 01-10-2015, 06:40 PM

Has any one started a pics thread on best mounting locations for the controller ,for us noobs?It would be great appreciated

Angrybird 12 · 01-10-2015, 07:13 PM

Quote:

Originally Posted by crazy82012

Has any one started a pics thread on best mounting locations for the controller ,for us noobs?It would be great appreciated

I will probably experiment with different locations. Not sure until I get it where it will fit best for me.

ratfinkharley · 01-10-2015, 07:21 PM

I mounted mine here. Just need to pin the wire down to clean it up.

45thCamaro · 01-10-2015, 08:27 PM

Quote:

Originally Posted by ratfinkharley

I mounted mine here. Just need to pin the wire down to clean it up.

This is where I wanted to mount mine, however the cheap dash inserts I installed on my car face the controller down on a bad angle. I also looked into cutting out a hole in that dash piece and recessing it into it. However it seemed like it wouldn't be doable considering that the dash piece is very shallow.

crazy82012 · 01-10-2015, 08:32 PM

Nice rat Fink,so where did u mount yours 45th ,come on guys where did you mount yours?

45thCamaro · 01-11-2015, 06:53 AM

Quote:

Originally Posted by crazy82012

Nice rat Fink,so where did u mount yours 45th ,come on guys where did you mount yours?

I mounted mine right below the dic. I ran the wire through the top of the steering column and down into the footwell.

camguynj · 01-11-2015, 08:28 AM

Quote:

Originally Posted by crazy82012

Nice rat Fink,so where did u mount yours 45th ,come on guys where did you mount yours?

See pic post #844 on this pg it's where I have mine http://www.camaro5.com/forums/showth...372526&page=34

2Fr3shKicks · 01-11-2015, 10:58 AM

I will be ordering mines this Friday Pay Day�� I cant not wait for this mod.

CamaroRBT · 01-11-2015, 04:22 PM

Is there any difference between the v8 verson and the v6 verson. I accidently ordered the v6 verson :-( i sent them a message but i hope i get the right one

Angrybird 12 · 01-11-2015, 05:30 PM

Quote:

Originally Posted by CamaroRBT

Is there any difference between the v8 verson and the v6 verson. I accidently ordered the v6 verson :-( i sent them a message but i hope i get the right one

I only saw one listed for all camaros. I may have accidently ordered a V8 version.
http://vitesse-motorsports.com/throt...010-camaro.htm

enzia35 · 01-11-2015, 06:28 PM

I only see one listing, and no differentiation between v6/ss.

Angrybird 12 · 01-11-2015, 06:45 PM

Quote:

Originally Posted by enzia35

I only see one listing, and no differentiation between v6/ss.

I know on the site when you do a search on Vitesse motorsports, but now I found another link that says LFX... So I don't know. I messaged them to make sure.

http://www.vitesse-motorsports.com/t...camaro-lfx.htm

1KillerSS · 01-11-2015, 08:34 PM

I believe they are all the same.

Angrybird 12 · 01-11-2015, 08:39 PM

Quote:

Originally Posted by 1KillerSS

I believe they are all the same.

The reason I am no longer sure was this post he made in the preorder thread for the SS controller

Quote:

Originally Posted by horizon670

I'm still working on the LFX engine as well as the ZL1's LSA

01-10-2015, 07:21 PM	#535
ratfinkharley Drives: 15 JKU, 00 S10, 73 Vette, 12 JK Join Date: Jan 2014 Location: garage Posts: 370	I mounted mine here. Just need to pin the wire down to clean it up. __________________ RotoFab CAI - VMaxx Ported TB - Apex Catch Can - CFD Shifter - Choppers Inc Loaded Dice Shift Knob

01-11-2015, 04:22 PM	#541
CamaroRBT Who's Laughing Now? Drives: 2011 Camaro 1SS RS LS3 Summit White Join Date: May 2011 Location: Maryland Posts: 322 View My Garage	Is there any difference between the v8 verson and the v6 verson. I accidently ordered the v6 verson :-( i sent them a message but i hope i get the right one __________________ Vararam CAI, Vmax Ported TB, Stainless Power LT Headers, High Flow Cats, Flowmaster AT Catback, Diablosport Predator, Hurst Short Throw Shifter, JRE Custom Tune, 3.91 gears, BMR 1" Drop Springs, BMR Trailing Arms, Michelin PSS 255/285, SLP Splitter, JL audio system, JL W3 12" Sub, Oracle Fog Lights. JL Audio Build Thread: http://www.camaro5.com/forums/showthread.php?t=269949

01-11-2015, 06:28 PM	#543
enzia35 Drives: '16 Garnet Red 1SS Join Date: Mar 2014 Location: College Station, TX Posts: 3,450	I only see one listing, and no differentiation between v6/ss. __________________ '16 Camaro 1SS '18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata

01-11-2015, 08:34 PM	#545
1KillerSS Too much is never enough! Drives: AGP TT SS [COTW] 4/20/15 Join Date: Feb 2014 Location: Toledo,OH Posts: 4,149 View My Garage	I believe they are all the same. __________________ AGP TT kit, 54/57 Forged rotating assembly, Custom grind cam... Dual nozzle meth, ID850's, Livernois dual fuel pumps, ECS BAP, 25% UDP, 3 inch Magnaflow catback with X pipe, Mantic 9000 clutch, DSS 1000hp axles, DSS aluminum driveshaft, ZL1 rear end, solid subframe bushings, HE differential offset bushings, BMR Trailing arm, BMR toe rods, Lingenfelter LNC-2000,SJM Line Lock. 747 whp 714wtq *Build thread* http://www.camaro5.com/forums/showth...55#post8107855

01-10-2015, 06:40 PM	#533
crazy82012 Drives: SIM2012 Rollin on22's LEDs Join Date: Oct 2014 Location: Arizona Posts: 76	Has any one started a pics thread on best mounting locations for the controller ,for us noobs?It would be great appreciated

01-10-2015, 08:32 PM	#537
crazy82012 Drives: SIM2012 Rollin on22's LEDs Join Date: Oct 2014 Location: Arizona Posts: 76	Nice rat Fink,so where did u mount yours 45th ,come on guys where did you mount yours?

01-11-2015, 10:58 AM	#540
2Fr3shKicks Drives: 2012 Chevy Camaro RS Join Date: Jun 2012 Location: Washington DC Posts: 196	I will be ordering mines this Friday Pay Day�� I cant not wait for this mod.