2010-11 Camaro ACC LED Side Marker Mods for Turn Signals

[OVERPAR73]

45th,
I finally got one of my AAC side mirrors hooked up and working the way I want with the turn signal. I also added another wire through the door because I put some red LEDs on the inside (outer) edge to be seen from the rear view, everything looks really good, I still can't get the side markers to blink, but if I bypass the DIC and hold a wire directly on the red tab on the inside of the marker, the turn signal light works OK, so I'm thinking I have some problems with the DIC's. I will take some videos after I get everything complete.

[45th]

Originally Posted by OVERPAR73

45th,
I finally got one of my AAC side mirrors hooked up and working the way I want with the turn signal. I also added another wire through the door because I put some red LEDs on the inside (outer) edge to be seen from the rear view, everything looks really good, I still can't get the side markers to blink, but if I bypass the DIC and hold a wire directly on the red tab on the inside of the marker, the turn signal light works OK, so I'm thinking I have some problems with the DIC's. I will take some videos after I get everything complete.

Your probably right about the dic being bad. The only other thing I can think of is mabye the wires are on the wrong terminals of the dic? Probably not if you hooked them up the same as your new mirrors. (just thinking outloud)

So you put leds in the rearview mirrors? Sounds cool cant wait to see it

Sorry I never took any pics, Ive been sick the past few days.

[linvol20]

is there a link to buy?

Update


found 2 diff links

http://www.automotivelightstore.com/...ycircuits.aspx

http://www.radiantz.com/en/products#...egory=10295189