Help to lower IAT's on PD blower

[JMI]

Would you have enough room to add a 1/2" RDS spacer under the hood of your Vette?

[CamaroCracka]

Originally Posted by LedfootLarry

So , to the OP with the turbo, your meth is injected after boost ( post blower ), same as a centri setup, which is way more effective than pre blower on my setup.
And as far as its not a lot of money for meth ?
Have to consider at least $1000-1200 install and tuned!
For what return ? I need to cool this bitch lol

They make direct port meth kits, which would be post boost and post intercooler.

[LedfootLarry]

If you look at the pic of the blower , the rear coolant lines that attach at 90* angle under the cowl, very little clearance there , and not much more under hood.
And to OP , I know my setup is not going to run at ambient air temp!!
The question was real world proof and personal experience!!
And all I wanted to know, is if anyone lowered IAT's approx
20* with meth !!

[AGP Turbo]

Originally Posted by LedfootLarry

If you look at the pic of the blower , the rear coolant lines that attach at 90* angle under the cowl, very little clearance there , and not much more under hood.
And to OP , I know my setup is not going to run at ambient air temp!!
The question was real world proof and personal experience!!
And all I wanted to know, is if anyone lowered IAT's approx
20* with meth !!

Yes, of course. More than 20*. It just takes a lot of meth on the PD's to get a lot of effect and it's not likely being dispersed well at all.