Paintless dent repair on rear quarter - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

rontammy0 · 04-10-2017, 09:12 PM

This can be removed enough so an untrained eye wont see it. Had one on my fender in the exact same location as you. The problem being close to the edge is having alot less leverage points to pry from. Thats the only problem.

Adrian97c · 04-10-2017, 09:19 PM

Sent from my iPhone using Tapatalk

gringo · 04-10-2017, 10:33 PM

Quote:

Originally Posted by Adrian97c

Sent from my iPhone using Tapatalk

Yikes! How did all of that happen?

Adrian97c · 04-11-2017, 01:47 PM

Quote:

Originally Posted by gringo

Yikes! How did all of that happen?

Morning foggy side mirrors, tried backing out squeezing thru tight spot in my drive way (wife parked her car crooked)... slowly touched her car... so one small miscalculated mistake... now only way to fix is for body shop to replace entire panel!! I don't want my car cut up for it...

So I'm going to try one more PDR tech to see if they are willing to try... even if it's just lil better, I'll be happy... either way, have to live with it. Def not wanting to get entire panel cut out & resprayed for such a small damage (although it drives me nuts).

Sent from my iPhone using Tapatalk

Adrian97c · 04-11-2017, 03:38 PM

https://youtu.be/w-gwU-Nb6yA

https://youtu.be/7g_wfo1r3SI

Being told by local PDR that they can't fix it, but these videos show that it's doable... glue pulling seems to be the way for my issue.

Sent from my iPhone using Tapatalk

ShadowYYZ · 05-01-2017, 07:49 AM

Quote:

Originally Posted by Adrian97c

https://youtu.be/w-gwU-Nb6yA

https://youtu.be/7g_wfo1r3SI

Being told by local PDR that they can't fix it, but these videos show that it's doable... glue pulling seems to be the way for my issue.

Sent from my iPhone using Tapatalk

Find a good PDR local guide. I used google search and found reviews and 2 shops told me not do-able. I didn't have any holes drilled and they went through the passenger open back side to fix it.

The pictures are on the 1st page on my thread
and last page is the work done.

http://www.camaro5.com/forums/showthread.php?t=469821

Adrian97c · 05-01-2017, 09:37 AM

They did great job on your car! Here are my before pics, & I'll post again once the job is done... I'm also having him fix dings on the top part of both rear fenders.. he quoted me $500 for all 3 panels including the very difficult wheel well edges:

Sent from my iPhone using Tapatalk

theragtopguy · 08-16-2017, 12:21 AM

How about on the door line? My buddy accidentally opened the pass door and hit a post, dented right on the body crease line. In the middle of the door.

BAD DAB · 08-16-2017, 08:20 AM

Quote:

Originally Posted by theragtopguy

How about on the door line? My buddy accidentally opened the pass door and hit a post, dented right on the body crease line. In the middle of the door.

Yes, a good paintless dent repairman can fix you right up. I had one in the crease line in my door as well. The dent was removed as if it was never there. Do some homework and find someone who has been doing this type of work for a while.

lbls1 · 08-16-2017, 08:35 AM

Dings near the wheel openings are harder to get out. It depends on how close to a crease or opening the dent is.

theragtopguy · 08-20-2017, 09:04 PM

The guy did a perfect job in 15 minutes!!! Plus fixed another tiny ding!!! What an artist......for 150 which the responsible party paid for. Wow

Sent from my iPhone using Tapatalk

rontammy0 · 08-21-2017, 08:01 AM

Ive had 4 door dings on the body line removed....a crease on the passenger door removed. A small dentbon the rail above the drivers door and a large dent in the fender. A good pdr guy in your contacts is a good idea.

alv927 · 08-21-2017, 11:38 AM

Quote:

Originally Posted by ledeof01

Sorry about the poor photo quality but this is the location of the dent.

i have 2 on the rear quarter and 1 in the drivers side fender.

tlavoie87 · 08-22-2017, 05:58 PM

does anyone have a good paintless guy in the mass area got a few small dings on the passengers door body line ...TIA

04-10-2017, 09:19 PM	#16
Adrian97c Drives: Wife's 14' IS 250 Join Date: Mar 2014 Location: PSL, FL Posts: 2,207	Sent from my iPhone using Tapatalk __________________ 2016 Camaro HBM A8, 2SS, NPP, Sunroof, Kalahari Interior/kneepads, Black bowties, 56v: -11% tint all around Ordered • 2/06/16 Built on • 3/22/16 Adopted • 4/07/16 Sold on 2/05/16: 2014 Camaro SW L99, 2SS, RS, NAV, Inferno Orange Interior: -Borla ATAK catback -Range AFM delete -15% tint all around -Red LED interior bulbs -55k white Cree LED fogs -License plate LED bulb swap -12" Sub Kit, BA amp swap -Oracle ghosted LED sidemarkers

04-11-2017, 03:38 PM	#19
Adrian97c Drives: Wife's 14' IS 250 Join Date: Mar 2014 Location: PSL, FL Posts: 2,207	https://youtu.be/w-gwU-Nb6yA https://youtu.be/7g_wfo1r3SI Being told by local PDR that they can't fix it, but these videos show that it's doable... glue pulling seems to be the way for my issue. Sent from my iPhone using Tapatalk __________________ 2016 Camaro HBM A8, 2SS, NPP, Sunroof, Kalahari Interior/kneepads, Black bowties, 56v: -11% tint all around Ordered • 2/06/16 Built on • 3/22/16 Adopted • 4/07/16 Sold on 2/05/16: 2014 Camaro SW L99, 2SS, RS, NAV, Inferno Orange Interior: -Borla ATAK catback -Range AFM delete -15% tint all around -Red LED interior bulbs -55k white Cree LED fogs -License plate LED bulb swap -12" Sub Kit, BA amp swap -Oracle ghosted LED sidemarkers

05-01-2017, 09:37 AM	#21
Adrian97c Drives: Wife's 14' IS 250 Join Date: Mar 2014 Location: PSL, FL Posts: 2,207	They did great job on your car! Here are my before pics, & I'll post again once the job is done... I'm also having him fix dings on the top part of both rear fenders.. he quoted me $500 for all 3 panels including the very difficult wheel well edges: Sent from my iPhone using Tapatalk __________________ 2016 Camaro HBM A8, 2SS, NPP, Sunroof, Kalahari Interior/kneepads, Black bowties, 56v: -11% tint all around Ordered • 2/06/16 Built on • 3/22/16 Adopted • 4/07/16 Sold on 2/05/16: 2014 Camaro SW L99, 2SS, RS, NAV, Inferno Orange Interior: -Borla ATAK catback -Range AFM delete -15% tint all around -Red LED interior bulbs -55k white Cree LED fogs -License plate LED bulb swap -12" Sub Kit, BA amp swap -Oracle ghosted LED sidemarkers

08-16-2017, 12:21 AM	#22
theragtopguy Lifetime Philly Fan Drives: 2015 Spring Edition 2SS M-6 Join Date: Mar 2012 Location: South Central Florida Posts: 1,861 View My Garage	How about on the door line? My buddy accidentally opened the pass door and hit a post, dented right on the body crease line. In the middle of the door. __________________ 2015 Green Flash, Delivered 4/10/15 CAI, NPP Exhaust, Short-throw shifter BBK LT HEADERS 1 7/8” Tune by DynoSteve via SCTx4 Tuner One of 82 GF Ragtops built in '15 out of 811 Total [/SIZE]

08-16-2017, 08:35 AM	#24
lbls1 Drives: 2002 Camaro SS SOM; 2015 Malibu LTZ Join Date: Dec 2010 Location: Queens, NY Posts: 4,071	Dings near the wheel openings are harder to get out. It depends on how close to a crease or opening the dent is. __________________ '02 CAMARO SS SOM; 5.7L LS1/FLS6B '08 TBSS AWD Black Granite Metallic '15 Malibu LTZ 2LZ Turbo *'14 CAMARO ZL1 Blue Ray Metallic* '25 Silverado 1500 High Country 6.2L

04-10-2017, 09:12 PM	#15
rontammy0 Account Suspended Drives: 2011 2SS/ RS INFERNO ORANGE L99 Join Date: Dec 2012 Location: Alliston Ontario Canada Posts: 9,057 View My Garage	This can be removed enough so an untrained eye wont see it. Had one on my fender in the exact same location as you. The problem being close to the edge is having alot less leverage points to pry from. Thats the only problem.

08-20-2017, 09:04 PM	#25
theragtopguy Lifetime Philly Fan Drives: 2015 Spring Edition 2SS M-6 Join Date: Mar 2012 Location: South Central Florida Posts: 1,861 View My Garage	The guy did a perfect job in 15 minutes!!! Plus fixed another tiny ding!!! What an artist......for 150 which the responsible party paid for. Wow Sent from my iPhone using Tapatalk __________________ 2015 Green Flash, Delivered 4/10/15 CAI, NPP Exhaust, Short-throw shifter BBK LT HEADERS 1 7/8” Tune by DynoSteve via SCTx4 Tuner One of 82 GF Ragtops built in '15 out of 811 Total [/SIZE]

08-21-2017, 08:01 AM	#26
rontammy0 Account Suspended Drives: 2011 2SS/ RS INFERNO ORANGE L99 Join Date: Dec 2012 Location: Alliston Ontario Canada Posts: 9,057 View My Garage	Ive had 4 door dings on the body line removed....a crease on the passenger door removed. A small dentbon the rail above the drivers door and a large dent in the fender. A good pdr guy in your contacts is a good idea.

08-22-2017, 05:58 PM	#28
tlavoie87 Built Not Bought Drives: 2010 Twin Turbo LFX Join Date: Jun 2016 Location: Massachusetts Posts: 618	does anyone have a good paintless guy in the mass area got a few small dings on the passengers door body line ...TIA __________________ 2010 Twin Turbo LFX In Memory of my DAD Gone but never Forgotten 2014 "Built Not Bought!' Sponsors: OverKill Motorsports

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	67	11-27-2024 09:02 AM
Paintless Dent Repair	chozn4service	USA - Great Lakes	14	04-07-2011 09:01 PM
New Visions Paintless Dent Repair	RedRaider	USA - Texas	0	06-08-2010 02:21 PM
Paintless Dent Repair at C5Fest?	Batman0837	2010 Camaro5 Fest (I)	45	04-19-2010 08:12 PM
And Another Car Crash...	GTAHVIT	Off-topic Discussions	73	01-12-2009 12:43 PM