Brake Caliper Removal - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bannonm · 04-05-2012, 09:15 PM

Quote:

Originally Posted by BOSS_HOSS

ZTSmith86...this is how to bleed with a mityvac. I have never done it but plan on it very soon after replacing the clutch line and return spring....

http://www.camaro5.com/forums/showthread.php?t=165176

I also have a jpeg of the service manual explaining how its done...but I can't figure out how to add it to a reply...when I click "add photo" it comes up with a "http:" link...???

If you create a photobucket.com account you upload the pictures to there and it creates HTTP links that you paste into your posts when you select add photo.

bannonm · 04-05-2012, 09:20 PM

Quote:

Originally Posted by BOSS_HOSS

SS Rear Caliper Bolts (Rear, M12 x 1.75 x 60) : 11515781
SS Front Caliper Bolts (Front, M14 x 2.0 x 56.5) : 11570788

Here's an order I placed with GMPartsGiant.

QTY UNIT COST EXTENDED
11515781 BOLT-METR 4 $1.34 $ 5.36
11570788 BOLT 4 $2.79 $11.16

Subtotal $16.52
Tax $0.00
UPS Ground $12.31
Special Shipping Cost $0.00
Total $28.83

Brianskeet · 04-06-2012, 10:45 AM

Mine are on their way now. Now I am down to waiting on the last few bits to be delivered and that dog gone list.

Li0nel1234 · 04-06-2012, 12:59 PM

Youtube it. There are lots of good videos on the procedure. Then all you need to know is what order to do it in and you're good to go. Or search the forum here. There's plenty of good info on how to do it. I did and I'm a no0b.

04-06-2012, 10:45 AM	#31
Brianskeet Brianskeet Drives: RJTC 1SS RS L99 Join Date: Sep 2010 Location: Crestview FL Posts: 771	Mine are on their way now. Now I am down to waiting on the last few bits to be delivered and that dog gone list. __________________ ARH 1 7/8 coated LT, High flows, Corsa L99 exhaust, Vmax CNC throttle body, Elite Engineering catch can and tunnel brace, C.A.I. Apex Washer relocation and scoop, Janetty Tune, MSD wires, DEI heat shields, RB rotors and pads, Mike the powder coater calipers, pedders lines, Forgestar F14's, Gorilla nutz, MTI spoiler finished by Gary, Gary's Customz Bow Ties, Side Markers and Tails tinted, Bezels matte black, Badges deleted, Windows Tinted, AAC DRL P13W lights, AAC tinted LED reverse lights, AAC LED interior lights, RPI match painted DRL Bezels, Lis plate frame, Lloyds mats

04-06-2012, 12:59 PM	#32
Li0nel1234 What should I name my car Drives: 2010 Camaro 2SS RS IOM Join Date: Jul 2009 Location: San Antonio, TX Posts: 786	Youtube it. There are lots of good videos on the procedure. Then all you need to know is what order to do it in and you're good to go. Or search the forum here. There's plenty of good info on how to do it. I did and I'm a no0b. __________________ Performance: ARH 2"/"3 headers + ARH 3" HF catback system, SS brake lines, hawk HP+ pads, motul RBF 600 fluid, K&N CAI (w/custom insulation), plug wires, air scoop, Hurst STS, Pedders Track II suspension, 18x10 wheels, 295/45/18 Nitto NT05s Looks: powder coated iom calipers, LED foglights w/ always on harness, custom painted bowties, window tint, smoke tinted tail lights etc, oem gfx w/ custom outlets, painted taillight bezels, all weather trunk mat

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Faded Brembo caliper?	Brettscamaro	Suspension / Brakes / Chassis	26	04-09-2017 07:01 PM
Brake Caliper "wheels"	RJTC11SS	Suspension / Brakes / Chassis	10	02-14-2016 11:03 PM
POLL - Powder coat whole rear brake or just the caliper...	Indpowr	Cosmetics and Lighting Modification Discussions	15	10-18-2010 11:00 PM
ROTORA BIG BRAKE KITS 4-12 PISTONS/ 15" & 16" ROTORS SPECIAL	ADKINS PERFORMANCE	Suspension / Chassis / Brakes	0	08-03-2010 12:08 PM