Colorado members check in here

[Icntdrv55]

Originally Posted by inagain

Anyone just want a Raptor shift light.Worked fine for me.1st pm with address gets it.

haha it didnt help you run any faster !!!

[pumpkinrancho]

Thanks Tom.

[Blue70SS]

Originally Posted by SinisterEcho

Thanks! Time to start doing some research!

Welcome to Colorado

Nice build thread...... after watching one of your videos, I was going to comment that you really need some subframe bushings - until I saw them installed later in the thread LOL. Looks like someone who really enjoys their Camaro - that's what we're all about!

RMCR in Colorado Springs does all the superchargers, but really likes the Vortec's. Their big Vortec build is a 1000++ RWHP... totally insane
They're a little pricier, fab alot of their own parts, awesome shop with numerous lifts and Mark is by far the best tuner around, owns his own dyno, and uses EFI live - so has ability for remote tune tweaks. He's quite the math wiz and definitely knows his stuff. They're almost always super busy with work..... says alot.

Brian at Laramie GMAC has done alot of my mods that I couldn't or didn't want to tackle at home (no substitute for a lift!) ..... really knows the in's and out's of the Camaro and does top quality work for a great price (lower than any Chevy dealer for club members), and really cares about doing quality work. You name it, he can do it. And oh..... he Really likes Nitrous

[Blue70SS]

Originally Posted by steelrfan

Awesome! I can't wait to see it! They had asked to use it for a poster and possibly a t-shirt design but didn't know they were going to use it for the Christmas card too I'm honored and humbled that they picked my car

Congrats Nicole! Really cool they picked your Camaro

[ToolFan66]

Originally Posted by Blue70SS

Welcome to Colorado

Nice build thread...... after watching one of your videos, I was going to comment that you really need some subframe bushings - until I saw them installed later in the thread LOL. Looks like someone who really enjoys their Camaro - that's what we're all about!

RMCR in Colorado Springs does all the superchargers, but really likes the Vortec's. Their big Vortec build is a 1000++ RWHP... totally insane
They're a little pricier, fab alot of their own parts, awesome shop with numerous lifts and Mark is by far the best tuner around, owns his own dyno, and uses EFI live - so has ability for remote tune tweaks. He's quite the math wiz and definitely knows his stuff. They're almost always super busy with work..... says alot.

Brian at Laramie GMAC has done alot of my mods that I couldn't or didn't want to tackle at home (no substitute for a lift!) ..... really knows the in's and out's of the Camaro and does top quality work for a great price (lower than any Chevy dealer for club members), and really cares about doing quality work. You name it, he can do it. And oh..... he Really likes Nitrous

I have wanted to take the drive and visit RMCR, have heard nothing but good stuff about them..

[Blue70SS]

Originally Posted by Icntdrv55

haha it didnt help you run any faster !!!

The Blue LED lights add 100 HP on MANual Camaros Kirk!

..... but can be replaced by a Brick on the gas pedal on Auto's (especially Red ones )

Happy Birthday last Saturday BTW! Couldn't be in 2 places at the same time Any Hangovers after the party

[Blue70SS]

Originally Posted by SinisterEcho

Hello everyone! I just moved to Ft. Collins this weekend from Maryland. Anybody have any good events that I should be aware of? If nobody knows of a cars and coffee for the area I would be willing to start one up! Hope to meet some of you sometime soon!

So based on your build thread and 8/4/12 strut tower signitures...... I take it you were at CamaroFest III? Rob and I were out there too.

Cool C5 signiture!

[SinisterEcho]

Originally Posted by Blue70SS

Welcome to Colorado

Nice build thread...... after watching one of your videos, I was going to comment that you really need some subframe bushings - until I saw them installed later in the thread LOL. Looks like someone who really enjoys their Camaro - that's what we're all about!

RMCR in Colorado Springs does all the superchargers, but really likes the Vortec's. Their big Vortec build is a 1000++ RWHP... totally insane
They're a little pricier, fab alot of their own parts, awesome shop with numerous lifts and Mark is by far the best tuner around, owns his own dyno, and uses EFI live - so has ability for remote tune tweaks. He's quite the math wiz and definitely knows his stuff. They're almost always super busy with work..... says alot.

Brian at Laramie GMAC has done alot of my mods that I couldn't or didn't want to tackle at home (no substitute for a lift!) ..... really knows the in's and out's of the Camaro and does top quality work for a great price (lower than any Chevy dealer for club members), and really cares about doing quality work. You name it, he can do it. And oh..... he Really likes Nitrous

Thanks Blue! I love my Camaro! Its awesome! I plan on looking into all of the tuners in the area to find one that I like as much as Jannetty. Im still doing my research on them but Ill keep everyone updated!

Originally Posted by ToolFan66

I have wanted to take the drive and visit RMCR, have heard nothing but good stuff about them..

Ill let ya know when I go out there... maybe make a drive out of it?

Originally Posted by Blue70SS

So based on your build thread and 8/4/12 strut tower signitures...... I take it you were at CamaroFest III? Rob and I were out there too.

Cool C5 signiture!

Yep! I was there and had a blast with quite a few good friends that I met from the forums. I hope I can make it again this year... but actually be able to race!

[Mike@RMCR]

Originally Posted by ToolFan66

I have wanted to take the drive and visit RMCR, have heard nothing but good stuff about them..

Feel free to stop by whenever. I have one of our 1000 rwhp Camaros back and shooting for 1500 RWHP with a prototype blower from Vortech.

I can also show you our new CNC Plasma cutter. Should help speed up custom fabrication.


Mike

[Mike@RMCR]

Originally Posted by Blue70SS

Welcome to Colorado

Nice build thread...... after watching one of your videos, I was going to comment that you really need some subframe bushings - until I saw them installed later in the thread LOL. Looks like someone who really enjoys their Camaro - that's what we're all about!

RMCR in Colorado Springs does all the superchargers, but really likes the Vortec's. Their big Vortec build is a 1000++ RWHP... totally insane
They're a little pricier, fab alot of their own parts, awesome shop with numerous lifts and Mark is by far the best tuner around, owns his own dyno, and uses EFI live - so has ability for remote tune tweaks. He's quite the math wiz and definitely knows his stuff. They're almost always super busy with work..... says alot.

Brian at Laramie GMAC has done alot of my mods that I couldn't or didn't want to tackle at home (no substitute for a lift!) ..... really knows the in's and out's of the Camaro and does top quality work for a great price (lower than any Chevy dealer for club members), and really cares about doing quality work. You name it, he can do it. And oh..... he Really likes Nitrous

Thanks that mean alot.

[steelrfan]

Originally Posted by Blue70SS

Congrats Nicole! Really cool they picked your Camaro

Thanks

[Blue70SS]

You just told a thief where to go better to PM that

[Blue70SS]

Originally Posted by Mike@RMCR

Thanks that mean alot.

Your welcome Mike.

[2SS45th]

If you are talking about the shift light, it is headed my way. I'd probably take your address down, your Camaro's in there!