SS Bumper or GM V6 GFX Front Splitter? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Mach · 02-20-2011, 01:06 PM

I am getting bored with the plainness of the V6 bumper. I want something more aggressive.

What do you guys think...

Which would give me a more aggressvie look?

Which of the two is lower to the ground?

I am having trouble finding good shots of the V6 GM GFX Splitter.

LED Crazy · 02-20-2011, 01:15 PM

You do not see very many V6's with front splitters or even the complete GFX kit. I would go with the splitter. Unique look in my mind. If you go for the SS bumper you should get the T3 ports

Mach · 02-20-2011, 01:18 PM

I was thinking getting the splitter too but the problem is it costs about the same as the SS bumper. If I where to get the SS bumper.. I would shave off the mailslot.

At this point I am trying to figure out which sits lower to the ground.

Bond · 02-20-2011, 02:07 PM

Get the splitter.
I've yet to see a total delete of the mailslot.. and the splitter is much more unique.
I think it'll make you happier!

Mach · 02-20-2011, 02:17 PM

Anybody have close up picture of a v6 GFX splitter on a SW?

scottc · 02-20-2011, 02:26 PM

Here ya go! The gfx changes the look of the car dramatically for the better in my opinion. Either way, ss bumper or splitter, it will look good.

Victoryred69 · 02-20-2011, 04:15 PM

i was thinking the exact same thing!

It looks awesome with just the front splitter.... does anyone have a part number or a link to find JUST the front GFX splitter for the V6???

GreenMonster · 02-20-2011, 04:42 PM

both if $ is right if not the splitter

camarowa · 02-20-2011, 05:00 PM

I would get the SS bumper. I am just not a fan of the gfx in general.

skuttduck · 02-20-2011, 06:18 PM

Quote:

Originally Posted by Victoryred69

i was thinking the exact same thing!

It looks awesome with just the front splitter.... does anyone have a part number or a link to find JUST the front GFX splitter for the V6???

I believe this is the part number for just the V6 splitter.
92207425

ss=scuba steve · 02-20-2011, 07:45 PM

If you want to save some dough, check the classifieds on this site. Some V8 owners like the V6 facia better and may just swap with you, all you will pay for is to have it painted. If you find one trying to swap with a SW then it's a win! All you have to pay for is shipping !

Mach · 02-21-2011, 12:05 AM

Quote:

Originally Posted by ss=scuba steve

If you want to save some dough, check the classifieds on this site. Some V8 owners like the V6 facia better and may just swap with you, all you will pay for is to have it painted. If you find one trying to swap with a SW then it's a win! All you have to pay for is shipping !

So apparently the Front GFX splitter ALONE costs over 500 dollars. <<<INSANE!

I can get a SS bumber for around 300. Better yet trade with someone who wants a V6 front!!! Delete the mailslot and I am golden.

From the pictures above it appears that a SS bumper is lower then the splitter.

DarkneSS · 02-21-2011, 12:07 AM

Instead of posing and getting a SS bumper get a nice aftermarket bumper so youll be unique and look better than stock bumpers.

Mach · 02-21-2011, 12:09 AM

Quote:

Originally Posted by DarkneSS

Instead of posing and getting a SS bumper get a nice aftermarket bumper so youll be unique and look better than stock bumpers.

Yeah but you can't beat the price of a SS bumper. I don't think I'd be that much of a poser if I deleted the mailslot.

02-20-2011, 01:06 PM	#1
Mach Drives: White M6 1LT RS Join Date: Mar 2010 Location: Canton, MI Posts: 1,676	SS Bumper or GM V6 GFX Front Splitter? I am getting bored with the plainness of the V6 bumper. I want something more aggressive. What do you guys think... Which would give me a more aggressvie look? Which of the two is lower to the ground? I am having trouble finding good shots of the V6 GM GFX Splitter. __________________ Pfadt Sway Bars - FE3 Suspension - Barton Shifter - IdealG's Clutch Master Cylinder - Trifecta - Vmax TB - Vararam Intake - MACE 25mm Insulator - Plenum Insulator - Ported/Gasket Matched Intake Manifold - Rx Catchcan - AAC DRL's - 4 Pack Aux Gauges - Steering Controls - AAC Afterburners - DIY Led Sidemarkers - ZL1 Front End Next mod: Done!

02-20-2011, 01:18 PM	#3
Mach Drives: White M6 1LT RS Join Date: Mar 2010 Location: Canton, MI Posts: 1,676	I was thinking getting the splitter too but the problem is it costs about the same as the SS bumper. If I where to get the SS bumper.. I would shave off the mailslot. At this point I am trying to figure out which sits lower to the ground. __________________ Pfadt Sway Bars - FE3 Suspension - Barton Shifter - IdealG's Clutch Master Cylinder - Trifecta - Vmax TB - Vararam Intake - MACE 25mm Insulator - Plenum Insulator - Ported/Gasket Matched Intake Manifold - Rx Catchcan - AAC DRL's - 4 Pack Aux Gauges - Steering Controls - AAC Afterburners - DIY Led Sidemarkers - ZL1 Front End Next mod: Done!

02-20-2011, 02:07 PM	#4
Bond Heritage Hanger Drives: 2010 Camaro 2SS/RS, Black. Join Date: May 2009 Location: Edmonton Alberta Posts: 1,152	Get the splitter. I've yet to see a total delete of the mailslot.. and the splitter is much more unique. I think it'll make you happier! __________________ Keeping The Spirit Alive!

02-20-2011, 02:17 PM	#5
Mach Drives: White M6 1LT RS Join Date: Mar 2010 Location: Canton, MI Posts: 1,676	Anybody have close up picture of a v6 GFX splitter on a SW? __________________ Pfadt Sway Bars - FE3 Suspension - Barton Shifter - IdealG's Clutch Master Cylinder - Trifecta - Vmax TB - Vararam Intake - MACE 25mm Insulator - Plenum Insulator - Ported/Gasket Matched Intake Manifold - Rx Catchcan - AAC DRL's - 4 Pack Aux Gauges - Steering Controls - AAC Afterburners - DIY Led Sidemarkers - ZL1 Front End Next mod: Done!

02-20-2011, 02:26 PM	#6
scottc Central PA Camaro5 Club Drives: Hot Wheels Join Date: Apr 2009 Location: pa Posts: 2,369	Here ya go! The gfx changes the look of the car dramatically for the better in my opinion. Either way, ss bumper or splitter, it will look good. Attached Images

02-20-2011, 01:15 PM	#2
LED Crazy okcamaros.com Drives: 2016 SS Join Date: May 2009 Location: Tulsa, Ok Posts: 1,754 View My Garage	You do not see very many V6's with front splitters or even the complete GFX kit. I would go with the splitter. Unique look in my mind. If you go for the SS bumper you should get the T3 ports

02-20-2011, 04:15 PM	#7
Victoryred69 Drives: RS Victory Red/BS V6 Join Date: Aug 2010 Location: toronto Posts: 384	i was thinking the exact same thing! It looks awesome with just the front splitter.... does anyone have a part number or a link to find JUST the front GFX splitter for the V6??? __________________ 2010 Camaro 2LT RS M6 VR/BS Flowmaster AMT Axle Back Vararam Ram Air Intake P13 Plazma Bulbs DT Shorty Headers Heritage Grill Blacked-Out Taillights and Side Markers

02-20-2011, 04:42 PM	#8
GreenMonster Its all about the U Drives: 2010 SGM Join Date: Mar 2010 Location: Miami Posts: 1,671	both if $ is right if not the splitter __________________ C5.SFC5//FacebookSFC5\\SFC5.TK

02-20-2011, 05:00 PM	#9
camarowa Drives: 2013 SVT Raptor, sold 2010 Camaro Join Date: Jul 2009 Location: PNW....almost canada Posts: 1,907	I would get the SS bumper. I am just not a fan of the gfx in general. __________________ - Pfadt Suspension Package; Springs & Sways - Brembo Brake Upgrade (Yellow); Courtesy Fesler Built - Custom Magnaflow Exhaust - Blacked-Out Bowties & RS Emblems, Front bowtie delete - Full Dynamat Extreme Trunk Coverage - Tinted side markers - Interior DSV Customs Leather Upgrades - Airaid CAI V2 - Forgestar F14 Gunmetal 20x9, 20x11 - Doug Thorley Shorties

02-20-2011, 07:45 PM	#11
ss=scuba steve Drives: 2011 1SS Cyber Gray Metallic Join Date: Jul 2010 Location: SoFla Posts: 863 View My Garage	If you want to save some dough, check the classifieds on this site. Some V8 owners like the V6 facia better and may just swap with you, all you will pay for is to have it painted. If you find one trying to swap with a SW then it's a win! All you have to pay for is shipping ! __________________

02-21-2011, 12:07 AM	#13
DarkneSS Account Suspended Drives: 2010 Camaro 2SS/RS 6MT Join Date: Apr 2010 Location: Westchester, New York Posts: 3,715	Instead of posing and getting a SS bumper get a nice aftermarket bumper so youll be unique and look better than stock bumpers.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5th Gen Suspension -- The Book	JusticePete	Suspension / Brakes / Chassis	151	05-07-2015 06:52 PM
WTT or WTB OEM 2LT Complete Bumper for SS Front Bumper (complete)	meb885	Exterior Parts & Accessories	0	12-16-2010 03:50 AM
2010 Camaro SS V8 in Syracuse NY-FREE TRAVEL TO PICKUP	Mitsubishi in Syracuse	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	0	12-10-2009 05:23 PM
Who's switching the ss bumper to the rs v6 front bumper?	chevydude26	Cosmetics and Lighting Modification Discussions	113	08-24-2008 02:10 PM