SOLD!!!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BronxxBombers213 · 11-14-2014, 10:16 PM

all sold!

TwentyTen2SSRS · 11-15-2014, 04:19 AM

I'm a little lost. I'm interested but how do I get key cut for my car?

TwentyTen2SSRS · 11-15-2014, 12:46 PM

Oh I see so doesnt really work like a backup if I lose this set of keys. Thanks!

TwentyTen2SSRS · 11-15-2014, 03:08 PM

Oh got it! No I meant that with the uncut switchblade as one piece? I wasn't expecting you to have a pre cut version for my car haha.

Thanks for clarification

balla48801 · 11-15-2014, 09:04 PM

I bought one like this one ebay and a local locksmith cut it for like 20$. Didnt need any kind of laser cutter and only took about 10min. I think to program it i had to put the origianl key in and turn the car on then off and then with 10 seconds put in the new key and turn on. Pretty simple and works perfect.

camguynj · 11-15-2014, 11:14 PM

Quote:

Originally Posted by balla48801

I bought one like this one ebay and a local locksmith cut it for like 20$. Didnt need any kind of laser cutter and only took about 10min. I think to program it i had to put the origianl key in and turn the car on then off and then with 10 seconds put in the new key and turn on. Pretty simple and works perfect.

Is the original key you used a switchblade or a recall key?

RGV2SSRS · 11-16-2014, 11:45 AM

Ill take one 4 button chevy remote. I am not sure of the model #. But I have a 2010 camaro ss. M6. Please pm me.

bigdog96z · 11-17-2014, 06:09 PM

I plan to keep my SS a long time as well. I'll take the FCC OHT01060512 chevrolet 4 button if you still have it. PM me with your paypal info or let me know how you want payment

balla48801 · 11-17-2014, 07:24 PM

Ill take the FCC V2T-01060512 5 button. Pm me your paypal info

MARINE1991 · 12-05-2014, 04:21 PM

man just bought two on ebay... mine already broke...

sbubbaklein · 12-19-2014, 01:10 PM

I bought one off of ebay and was unable to program it. My dealership advised that since it was used it had been matched to another Vin and they were unable to unlock it. Since then I have contacted the company who sold it and they advised it had to be cleared before it would program again. They sent me to a third party who would flash clear it for another $10 so it could be programed.

If the replacement key fob you purchase has never been used before you can program it in providing you have a good key to begin with.

I have since bought a new GM key fob pn 13504199 , 5 button, chevy emblem on back, has remote start. The cost was $37.95 the same as what the used key would be with flash programing.

TwentyTen2SSRS · 12-19-2014, 03:01 PM

Quote:

Originally Posted by sbubbaklein

I bought one off of ebay and was unable to program it. My dealership advised that since it was used it had been matched to another Vin and they were unable to unlock it. Since then I have contacted the company who sold it and they advised it had to be cleared before it would program again. They sent me to a third party who would flash clear it for another $10 so it could be programed.

If the replacement key fob you purchase has never been used before you can program it in providing you have a good key to begin with.

I have since bought a new GM key fob pn 13504199 , 5 button, chevy emblem on back, has remote start. The cost was $37.95 the same as what the used key would be with flash programing.

Do you have a link? Please let me know I'm looking for two back up key fobs!

Thank you in advance.

sbubbaklein · 12-19-2014, 04:22 PM

Quote:

Originally Posted by TwentyTen2SSRS

Do you have a link? Please let me know I'm looking for two back up key fobs!

Thank you in advance.

here is where I got the new GM key fob http://stores.ebay.com/wickstromchevroletpartsstore/

search for Camaro transmiter

TommyTheCat · 12-19-2014, 04:39 PM

Just so everyone knows.. you don't have to pay a locksmith to cut your blade if you buy a new one. They'll cut it to match for free so long as you have one

also the recalled keys are easily fixable, I cut a pair of cutter pliers and ripped it up within a minute and put a new roll pin in the hole on the fob, so I still have two switch blade keys and now a spare with no fob.

Bump for OP.

11-14-2014, 10:16 PM	#1
BronxxBombers213 Drives: 2010 Camaro 2SS RS Join Date: Nov 2011 Location: NYC Posts: 2,387	SOLD!!!! all sold! __________________ Last edited by BronxxBombers213; 03-16-2015 at 12:29 AM.

11-15-2014, 04:19 AM	#2
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,974 View My Garage	I'm a little lost. I'm interested but how do I get key cut for my car? __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

11-15-2014, 12:46 PM	#3
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,974 View My Garage	Oh I see so doesnt really work like a backup if I lose this set of keys. Thanks! __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

11-15-2014, 03:08 PM	#4
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,974 View My Garage	Oh got it! No I meant that with the uncut switchblade as one piece? I wasn't expecting you to have a pre cut version for my car haha. Thanks for clarification __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

11-16-2014, 11:45 AM	#7
RGV2SSRS Drives: 2010 CAMARO 2SS/RS Join Date: Jun 2010 Location: RGV TEXAS Posts: 371	Ill take one 4 button chevy remote. I am not sure of the model #. But I have a 2010 camaro ss. M6. Please pm me. __________________

11-15-2014, 09:04 PM	#5
balla48801 Drives: 2010 SS Join Date: May 2014 Location: TN Posts: 35 View My Garage	I bought one like this one ebay and a local locksmith cut it for like 20$. Didnt need any kind of laser cutter and only took about 10min. I think to program it i had to put the origianl key in and turn the car on then off and then with 10 seconds put in the new key and turn on. Pretty simple and works perfect.

11-17-2014, 06:09 PM	#8
bigdog96z Drives: '13 Avalanche & 2018 1SS/1LE SW Join Date: Sep 2010 Location: Austin Texas Posts: 127	I plan to keep my SS a long time as well. I'll take the FCC OHT01060512 chevrolet 4 button if you still have it. PM me with your paypal info or let me know how you want payment __________________ 2018 1SS/1LE Summit White Cold Air Inductions CAI JLP Catch Can

11-17-2014, 07:24 PM	#9
balla48801 Drives: 2010 SS Join Date: May 2014 Location: TN Posts: 35 View My Garage	Ill take the FCC V2T-01060512 5 button. Pm me your paypal info

12-05-2014, 04:21 PM	#10
MARINE1991 Drives: COTW 8/29/11 2010 CAMARO Join Date: Jul 2009 Location: HOMELESS Posts: 10,010 View My Garage	man just bought two on ebay... mine already broke...

12-19-2014, 01:10 PM	#11
sbubbaklein Drives: early 2011 Camaro convertible Join Date: Jul 2014 Location: House Springs, Mo Posts: 2,001 View My Garage	I bought one off of ebay and was unable to program it. My dealership advised that since it was used it had been matched to another Vin and they were unable to unlock it. Since then I have contacted the company who sold it and they advised it had to be cleared before it would program again. They sent me to a third party who would flash clear it for another $10 so it could be programed. If the replacement key fob you purchase has never been used before you can program it in providing you have a good key to begin with. I have since bought a new GM key fob pn 13504199 , 5 button, chevy emblem on back, has remote start. The cost was $37.95 the same as what the used key would be with flash programing. __________________ Early 2011 LT Convertible, ZL1 bumper, hood, side skirts, belly pan and wheels, Truecarbon ECF hood extractor, K&N CAI, Elite catch can, Big Worm Bow Tie emblems, Jacfab bracket, Vitesse TC, BMR strut brace, BMR tunnel brace, NPP exhaust Last edited by sbubbaklein; 12-19-2014 at 01:21 PM.

12-19-2014, 04:39 PM	#14
TommyTheCat SHKE BKE Drives: 2013 Camaro Join Date: May 2014 Location: SoCal Posts: 3,105	Just so everyone knows.. you don't have to pay a locksmith to cut your blade if you buy a new one. They'll cut it to match for free so long as you have one also the recalled keys are easily fixable, I cut a pair of cutter pliers and ripped it up within a minute and put a new roll pin in the hole on the fob, so I still have two switch blade keys and now a spare with no fob. Bump for OP.