Winter mods for summer fun. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

owhite3003 · 12-18-2014, 06:48 PM

Just checking out if anyone is doing some upgrades on their Camaro this winter. Hopefully breathe a little action into this forum. lol

MonsterV6 · 12-18-2014, 09:52 PM

I got my cam on order, should be here tomorrow. Won't install till late January tho

owhite3003 · 12-18-2014, 11:02 PM

Very nice. What cam are you going with?
I am doing some engine upgrades and installing some stainless brake lines. Might get the calipers powder coated.

MonsterV6 · 12-19-2014, 12:54 AM

-ls3 cam kit 233/248 113+5
- 7.4 rods with the titanium .660 springs
-c5 chain
-3 bolt conversion
-apr 3 bolts
-gasket

MonsterV6 · 12-19-2014, 12:58 AM

What's needed to remove from he calipers to get them powder coated?

owhite3003 · 12-19-2014, 11:16 AM

I am not sure. I think you just send them in and they take care of it. The ZL1 and Brembo logo will be coated as well and not a sticker. Talk to JDP Motorsport if you are interested.
Sounds like you are definitely waking the motor up. Will need a video after you get it all installed.

MonsterV6 · 12-19-2014, 06:19 PM

I will look into it. Yeah I can't wait. I'll post A video when I get it tuned down at wongs in feb

Quote:

Originally Posted by owhite3003

I am not sure. I think you just send them in and they take care of it. The ZL1 and Brembo logo will be coated as well and not a sticker. Talk to JDP Motorsport if you are interested.
Sounds like you are definitely waking the motor up. Will need a video after you get it all installed.

Tricksta · 12-19-2014, 06:43 PM

Headers, Catch Can, Vitesse Controller, TB, maybe 3.91's and a tune before she comes out in spring! Supercharger might even make it on the list.

Blazer098 · 12-19-2014, 07:21 PM

MRT v2 or Solo MACH-X LFX and maybe a Cold Air Inductions Intake.

owhite3003 · 12-19-2014, 07:57 PM

Quote:

Originally Posted by MonsterV6

I will look into it. Yeah I can't wait. I'll post A video when I get it tuned down at wongs in feb

I think Brent is going to Wongs in February as well.

owhite3003 · 12-19-2014, 09:08 PM

Quote:

Originally Posted by Tricksta

Headers, Catch Can, Vitesse Controller, TB, maybe 3.91's and a tune before she comes out in spring! Supercharger might even make it on the list.

That should wake the beast up.

owhite3003 · 12-19-2014, 09:11 PM

Quote:

Originally Posted by Blazer098

MRT v2 or Solo MACH-X LFX and maybe a Cold Air Inductions Intake.

Very nice, I may have seen you around the O.C. There are a couple of Ashen Grey Metallic cars running around. I heard of a couple of other ZL1s prowling around as well.

Blazer098 · 12-19-2014, 10:24 PM

Quote:

Originally Posted by owhite3003

Very nice, I may have seen you around the O.C. There are a couple of Ashen Grey Metallic cars running around. I heard of a couple of other ZL1s prowling around as well.

You as well, there's a decent number of Camaros in general around our area.

MonsterV6 · 12-19-2014, 11:07 PM

Quote:

Originally Posted by owhite3003

I think Brent is going to Wongs in February as well.

Yeah he told me after he does the heads and some other things to his. Might end up going at the same time, probably get some other guys to go too and make a day of it

12-18-2014, 06:48 PM	#1
owhite3003 Z-BEAST Drives: 2013 JDP ZL-850 Track Spec ZL1, Join Date: Mar 2013 Location: Oregon City, OR Posts: 1,471	Winter mods for summer fun. Just checking out if anyone is doing some upgrades on their Camaro this winter. Hopefully breathe a little action into this forum. lol

12-18-2014, 09:52 PM	#2
MonsterV6 Drives: Chevrolet Camaro Join Date: Jan 2012 Location: Tukwila, Washington Posts: 376 View My Garage	I got my cam on order, should be here tomorrow. Won't install till late January tho __________________ 481rwhp 436 rwtq on a Mustang dyno, BTR stage iv comp cam, Stainless power headers w/ highflow cats, G5CR intake, straight pipe, vmax throttle body, 6k hid fog & headlights, BMR strut bar, LG Motorsport coilovers Hurst short shifter, Elite catch can, Stillen splitter,cypher harness bar,

12-19-2014, 12:54 AM	#4
MonsterV6 Drives: Chevrolet Camaro Join Date: Jan 2012 Location: Tukwila, Washington Posts: 376 View My Garage	-ls3 cam kit 233/248 113+5 - 7.4 rods with the titanium .660 springs -c5 chain -3 bolt conversion -apr 3 bolts -gasket __________________ 481rwhp 436 rwtq on a Mustang dyno, BTR stage iv comp cam, Stainless power headers w/ highflow cats, G5CR intake, straight pipe, vmax throttle body, 6k hid fog & headlights, BMR strut bar, LG Motorsport coilovers Hurst short shifter, Elite catch can, Stillen splitter,cypher harness bar,

12-19-2014, 12:58 AM	#5
MonsterV6 Drives: Chevrolet Camaro Join Date: Jan 2012 Location: Tukwila, Washington Posts: 376 View My Garage	What's needed to remove from he calipers to get them powder coated? __________________ 481rwhp 436 rwtq on a Mustang dyno, BTR stage iv comp cam, Stainless power headers w/ highflow cats, G5CR intake, straight pipe, vmax throttle body, 6k hid fog & headlights, BMR strut bar, LG Motorsport coilovers Hurst short shifter, Elite catch can, Stillen splitter,cypher harness bar,

12-19-2014, 11:16 AM	#6
owhite3003 Z-BEAST Drives: 2013 JDP ZL-850 Track Spec ZL1, Join Date: Mar 2013 Location: Oregon City, OR Posts: 1,471	I am not sure. I think you just send them in and they take care of it. The ZL1 and Brembo logo will be coated as well and not a sticker. Talk to JDP Motorsport if you are interested. Sounds like you are definitely waking the motor up. Will need a video after you get it all installed. Last edited by owhite3003; 12-19-2014 at 11:34 AM.

12-18-2014, 11:02 PM	#3
owhite3003 Z-BEAST Drives: 2013 JDP ZL-850 Track Spec ZL1, Join Date: Mar 2013 Location: Oregon City, OR Posts: 1,471	Very nice. What cam are you going with? I am doing some engine upgrades and installing some stainless brake lines. Might get the calipers powder coated.

12-19-2014, 06:43 PM	#8
Tricksta Drives: 2018 ZL1 A10 Join Date: Nov 2013 Location: Leipsic,Ohio Posts: 3,811 View My Garage	Headers, Catch Can, Vitesse Controller, TB, maybe 3.91's and a tune before she comes out in spring! Supercharger might even make it on the list. __________________ Modifications GM Dark Tail Lights / 3rd Brake Light & Reflectors \| LED Reverse Lights \| Diode Dynamics Side Markers \| Borla "ATAK" Cat Back Exhaust

12-19-2014, 07:21 PM	#9
Blazer098 Drives: 2015 Summit White SS Join Date: Aug 2014 Location: Oregon City, OR Posts: 357 View My Garage	MRT v2 or Solo MACH-X LFX and maybe a Cold Air Inductions Intake.