Anyone Know of any 1-piece Forged wheels? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

turbo222 · 11-23-2009, 01:46 PM

Hey guys!!

So i am really set on getting forged 20'' wheels but the 3 piece and 2 piece are just a little to much for me

So far all i have come up with that is close to my price range is CCW 1-piece forged wheels....Specificaly theses ones: CCW SP20 Front 20x10 Rear20x11 for 750 each... I would do these in Gloss black with a polished lip on a white camaro...

http://www.ccwheel.com/files/wheelpr...ay.php?id=SP20

Now my question is do you guys know of anyothere companies that offer a 1-piece forged wheel somewhere in that price range? im assuming it will have to be a 1-piece wheel to be in that price range.

THANKS GUYS!!

SS 376 · 11-23-2009, 02:04 PM

HRE makes 1-piece forged wheels but they are extremely expensive. Volk is cheaper, very high quality, and might be an option but I don't know if they have the right sizing for the Camaro.

turbo222 · 11-23-2009, 02:07 PM

^^ thanks ill check out volk for sure...ya i really like those ccw's...:( but i just found out that a black finish is not possable onless you pay 125 a wheel more...

Nine Ball · 11-23-2009, 02:50 PM

You won't find better quality forged 1-piece wheels for the price of CCW wheels. I've bought a few sets of them from John at CCW, they are hard to beat.

What is your max budget? I carry a few low priced 2-piece wheels.

Tony

turbo222 · 11-23-2009, 03:27 PM

well...iono lol can you give me like 2 or three brands of forged wheels that have those low pricest 2-piece wheels so i can broswer for a style i like ?

and like i said i really like those wheels form ccw but they dont come with and type painted finish...

RBD · 11-23-2009, 04:27 PM

AXIOM now has a mono-bloc wheel.........

FEN · 11-23-2009, 07:55 PM

I have a set of the CCW 505a's waiting for me......just waiting for my dealer to install my Eibach 1" springs.Should be able to get them on within a week. I drove up to CCW last week to look at the all aluminum TPS/valve stems w/chrome retainers. They were worth the extra $$$$....much nicer than the rubber stems. The entire crew at CCW is AWSOME and my wheels look great.

20x10 front w/275/40/20's
20x11.5 rear w/305/35/20's
Polished finish w/metal TPS stems and chrome ret. nuts

the wheels,sensors,chrome ret. nuts and two P Zero 305's were aprox $4,300 and well worth the $$$$

Russo · 11-23-2009, 08:01 PM

Vossen makes some good 1 piece wheels in the $2k range a set... they do some good work and there is a guy on g8board who's car looks bad ass with the 20s...

ToddC · 11-23-2009, 08:14 PM

Quote:

Originally Posted by FEN

I have a set of the CCW 505a's waiting for me......just waiting for my dealer to install my Eibach 1" springs.Should be able to get them on within a week. I drove up to CCW last week to look at the all aluminum TPS/valve stems w/chrome retainers. They were worth the extra $$$$....much nicer than the rubber stems. The entire crew at CCW is AWSOME and my wheels look great.

20x10 front w/275/40/20's
20x11.5 rear w/305/35/20's
Polished finish w/metal TPS stems and chrome ret. nuts

the wheels,sensors,chrome ret. nuts and two P Zero 305's were aprox $4,300 and well worth the $$$$

Do you have any pics of your wheels? I am seriously considering CCW's.

FEN · 11-23-2009, 08:39 PM

I dont have any pics of my wheels....should be installed in a week or so. Below is a link to a few pics of the exact size wheels & tires i will be running. The entire crew at CCW has been very helpfull & has endured all my questions.....My THANKS to John,Dan,& Chip

http://www.camaro5.com/forums/showthread.php?t=51400

ToddC · 11-23-2009, 08:45 PM

Quote:

Originally Posted by FEN

I dont have any pics of my wheels....should be installed in a week or so. Below is a link to a few pics of the exact size wheels & tires i will be running. The entire crew at CCW has been very helpfull & has endured all my questions.....My THANKS to John,Dan,& Chip

http://www.camaro5.com/forums/showthread.php?t=51400

Those wheels look fantastic. I've been looking at the 505 and the 16. The wife likes the 505's best. You know she will win. Will yours look like the yellow one in the thread after you lower it? That stance is just wicked.

Indpowr · 11-23-2009, 08:52 PM

I like a lot have had many sets of CCWs. Hate the polishing. I think they can powdercoat now. Good price and quality.

G8GT721 · 11-23-2009, 09:16 PM

Quote:

Originally Posted by turbo222

^^ thanks ill check out volk for sure...ya i really like those ccw's...:( but i just found out that a black finish is not possable onless you pay 125 a wheel more...

well that sucks i was looking at the exact same wheels for my G8 also in black, 900 a wheel is a bit much considering you need to buy tires too.

FEN · 11-23-2009, 09:26 PM

Quote:

Originally Posted by ToddC

Those wheels look fantastic. I've been looking at the 505 and the 16. The wife likes the 505's best. You know she will win. Will yours look like the yellow one in the thread after you lower it? That stance is just wicked.

Mine will be aprox. 1/2" higher. I hate the look of a large well gap but i dont want it too low. Mine is black w/factory GFX and im hoping that the Eibach 1" springs will give it just the right look.

11-23-2009, 01:46 PM	#1
turbo222 Drives: 2010 Summit White Camaro 1SS Join Date: Oct 2009 Location: Laguna Beach CA / Tempe AZ Posts: 285	Anyone Know of any 1-piece Forged wheels? Hey guys!! So i am really set on getting forged 20'' wheels but the 3 piece and 2 piece are just a little to much for me So far all i have come up with that is close to my price range is CCW 1-piece forged wheels....Specificaly theses ones: CCW SP20 Front 20x10 Rear20x11 for 750 each... I would do these in Gloss black with a polished lip on a white camaro... http://www.ccwheel.com/files/wheelpr...ay.php?id=SP20 Now my question is do you guys know of anyothere companies that offer a 1-piece forged wheel somewhere in that price range? im assuming it will have to be a 1-piece wheel to be in that price range. THANKS GUYS!!

11-23-2009, 02:50 PM	#4
Nine Ball Drives: 1969 & 2016 Camaro SS Join Date: Oct 2008 Location: Houston, TX Posts: 3,849	You won't find better quality forged 1-piece wheels for the price of CCW wheels. I've bought a few sets of them from John at CCW, they are hard to beat. What is your max budget? I carry a few low priced 2-piece wheels. Tony __________________ Fquick.com/NineBall

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New 3 piece wheels finished and going on this week	Indpowr	Wheels and Tires Talk Sponsored by The Tire Rack	21	11-22-2009 02:22 PM
my new 360 Forged Spec 5ive wheels	2010_5thgen	Wheels and Tires Talk Sponsored by The Tire Rack	111	08-16-2009 01:26 PM
The wheels have been chosen, now the wait (other mods to our car)	Indpowr	Wheels and Tires Talk Sponsored by The Tire Rack	9	07-18-2009 03:38 AM
Autoblog drives V6 Camaro w/ ground effects and GMPP wheels. Shares public reaction.	Tran	5th Gen Camaro SS LS LT General Discussions	1	07-13-2009 12:17 PM

11-23-2009, 02:04 PM	#2
SS 376 Drives: 2010 IBM 1SS (Former) Join Date: Feb 2009 Location: NoVA Posts: 2,031	HRE makes 1-piece forged wheels but they are extremely expensive. Volk is cheaper, very high quality, and might be an option but I don't know if they have the right sizing for the Camaro.

11-23-2009, 02:07 PM	#3
turbo222 Drives: 2010 Summit White Camaro 1SS Join Date: Oct 2009 Location: Laguna Beach CA / Tempe AZ Posts: 285	^^ thanks ill check out volk for sure...ya i really like those ccw's...:( but i just found out that a black finish is not possable onless you pay 125 a wheel more...

11-23-2009, 03:27 PM	#5
turbo222 Drives: 2010 Summit White Camaro 1SS Join Date: Oct 2009 Location: Laguna Beach CA / Tempe AZ Posts: 285	well...iono lol can you give me like 2 or three brands of forged wheels that have those low pricest 2-piece wheels so i can broswer for a style i like ? and like i said i really like those wheels form ccw but they dont come with and type painted finish...

11-23-2009, 04:27 PM	#6
RBD Drives: 2013 SS/RS Convertible Join Date: Aug 2009 Location: Mendota, IL Posts: 715 View My Garage	AXIOM now has a mono-bloc wheel.........

11-23-2009, 07:55 PM	#7
FEN Drives: BLACK 2SS/RS Join Date: Sep 2009 Location: Florida Posts: 1,092	I have a set of the CCW 505a's waiting for me......just waiting for my dealer to install my Eibach 1" springs.Should be able to get them on within a week. I drove up to CCW last week to look at the all aluminum TPS/valve stems w/chrome retainers. They were worth the extra $$$$....much nicer than the rubber stems. The entire crew at CCW is AWSOME and my wheels look great. 20x10 front w/275/40/20's 20x11.5 rear w/305/35/20's Polished finish w/metal TPS stems and chrome ret. nuts the wheels,sensors,chrome ret. nuts and two P Zero 305's were aprox $4,300 and well worth the $$$$

11-23-2009, 08:01 PM	#8
Russo Unofficial Glass Tech Drives: 2014 Ford F150 FX2 Join Date: May 2009 Location: Raceland, LA Posts: 1,376	Vossen makes some good 1 piece wheels in the $2k range a set... they do some good work and there is a guy on g8board who's car looks bad ass with the 20s...

11-23-2009, 08:39 PM	#10
FEN Drives: BLACK 2SS/RS Join Date: Sep 2009 Location: Florida Posts: 1,092	I dont have any pics of my wheels....should be installed in a week or so. Below is a link to a few pics of the exact size wheels & tires i will be running. The entire crew at CCW has been very helpfull & has endured all my questions.....My THANKS to John,Dan,& Chip http://www.camaro5.com/forums/showthread.php?t=51400

11-23-2009, 08:52 PM	#12
Indpowr Account Suspended Drives: Corvette C6 Join Date: May 2008 Location: Florida Posts: 6,959 View My Garage	I like a lot have had many sets of CCWs. Hate the polishing. I think they can powdercoat now. Good price and quality.