You are browsing camaro5 
 |
|
12-05-2009, 11:19 PM
|
#1 |
 Drives: 2010 2SS ABM -Sold Join Date: Jun 2009
Location: mi
Posts: 157
|
HELP amp install no sound
I have everything hooked up, thought I spliced into the correct wires but I guess I didn't. I have power to the amp, just no sound....
What is the EXACT colored wires I must splice into????????? My amp has the low level inputs on it also I have a 2SS if that helps ps. bought a scosche converter thinking that would help....it didnt Looks like the wires I spliced into are as follows, blue, drk/blue, blue white, light blue... is this correct?
__________________
2016 Hyper Blue 2SS M6 White Interior Mag Ride NPP GFX
|
|
|
|
12-05-2009, 11:38 PM
|
#2 |
 Drives: 2010 CGM Camaro SS\RS Join Date: Apr 2009
Location: PA
Posts: 56
|
check your amp settings, make sure they are turned up. Most new amps have them turned all the way down.
__________________
2SS CGM, IO Interior
BAD 2SS West Chester, PA |
|
|
|
|
12-06-2009, 12:23 PM
|
#3 | |
 
Drives: 2010 1LT/RS Join Date: Aug 2009
Location: Lexington, KY
Posts: 325
|
Quote:
I spliced into the plug mentioned here: http://www.camaro5.com/forums/showthread.php?t=33592 I used the one labeled Audio Amplifier X3, white for remote turn on, then tan/dk blue for right side signal and brown/brown-white for left side signal. I didn't use any kind of adapter, just cut off one side of my RCA's, then stripped the cut end and spliced into the wires. If looks like you used Audio Amplifier X2, which has the outputs from the amp. I'm seeing the following wires needing to be tapped: lightblue-black (right rear -) lightblue (right rear +) darkblue-white (left rear -) darkblue (left rear +) Do you have the factory amp in your system? Or are you actually tapping into the wires behind the radio. If it's behind the radio, let us know and we'll look for the right wires. Above is for the upgraded BA system, which has the amp in the trunk. |
|
|
|
|
|
12-06-2009, 02:29 PM
|
#4 |
|
Drives: 2010 2SS ABM -Sold Join Date: Jun 2009
Location: mi
Posts: 157
|
yes I have the BA system, tapping into the trunk, so I must use Audio Amplifier X3?
__________________
2016 Hyper Blue 2SS M6 White Interior Mag Ride NPP GFX
|
|
|
|
|
12-12-2009, 12:13 AM
|
#5 |
|
Drives: 2010 2SS ABM -Sold Join Date: Jun 2009
Location: mi
Posts: 157
|
bump!
__________________
2016 Hyper Blue 2SS M6 White Interior Mag Ride NPP GFX
|
|
|
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Amp install - how to (w/pics) | ASTEDA | Camaro DIY & HOW-TO instructions & discussions | 31 | 10-16-2019 12:14 AM |
| Amp install- how to (w/pics) | ASTEDA | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 63 | 02-27-2017 02:27 PM |
| V6 Corsa Exhaust Pics, Video and Sound | bond2 | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 176 | 10-08-2015 06:45 AM |
| STEP BY STEP VIDEO INSTALL OF MGW SHORT THROW SHIFTER>> | MGW | Camaro DIY & HOW-TO instructions & discussions | 39 | 12-02-2011 11:25 AM |
| ZZ Motorsports - Audio Install | ZZcamaro | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 3 | 07-21-2009 06:06 PM |
