GTS headlight cover install? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

5th_GEN_SS · 12-23-2009, 11:32 AM

Im not as incompitent as i may seem by this question,
i am just terrified to do anything to the Camaro lol

So i have the GTS tail light, fog light, and rear panel black out covers all which i have installed...

except the headlight covers.

I see that there are tabs @ the top of the cover which appear would slip under the top of the front facia, the covers are quite tall and can not directly be attached with out scratching the paint. (must possibly go in @ an angle)

can anyone please elaborate on the installation of the headlight covers for me please

so i dont scratch the F#$@# out of my paint.
thanks!

djsnoflake · 12-23-2009, 11:35 AM

Not familiar with it, but what are the chances you have to actually remove the front fascia?

Other than that, if anything looks like it might rub, I always try to wrap a soft cloth around it

5th_GEN_SS · 12-23-2009, 11:53 AM

hmmm i think that would be a bit much for installing headlight covers.. ppl have thm in the forum just waiting for someone who has done it 2 respond

tribone · 12-23-2009, 11:57 AM

Quote:

Originally Posted by 5th_GEN_SS

Im not as incompitent as i may seem by this question,
i am just terrified to do anything to the Camaro lol

So i have the GTS tail light, fog light, and rear panel black out covers all which i have installed...

except the headlight covers.

I see that there are tabs @ the top of the cover which appear would slip under the top of the front facia, the covers are quite tall and can not directly be attached with out scratching the paint. (must possibly go in @ an angle)

can anyone please elaborate on the installation of the headlight covers for me please

so i dont scratch the F#$@# out of my paint.
thanks!

PM me your contact info and I'll call you.

12-23-2009, 11:32 AM	#1
5th_GEN_SS Junkie Drives: SIM 2SS/RS M6 Join Date: Sep 2008 Location: Cleveland, Ohio Posts: 1,695 View My Garage	GTS headlight cover install? Im not as incompitent as i may seem by this question, i am just terrified to do anything to the Camaro lol So i have the GTS tail light, fog light, and rear panel black out covers all which i have installed... except the headlight covers. I see that there are tabs @ the top of the cover which appear would slip under the top of the front facia, the covers are quite tall and can not directly be attached with out scratching the paint. (must possibly go in @ an angle) can anyone please elaborate on the installation of the headlight covers for me please so i dont scratch the F#$@# out of my paint. thanks! __________________ "Letty" Murdered out 2013 Camaro 1LE. (Old car SIM 2010 2SS/RS)

12-23-2009, 11:53 AM	#3
5th_GEN_SS Junkie Drives: SIM 2SS/RS M6 Join Date: Sep 2008 Location: Cleveland, Ohio Posts: 1,695 View My Garage	hmmm i think that would be a bit much for installing headlight covers.. ppl have thm in the forum just waiting for someone who has done it 2 respond __________________ "Letty" Murdered out 2013 Camaro 1LE. (Old car SIM 2010 2SS/RS)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Headlight Armor Lighting Protection and Smoked Taillight Kits Available	HeadlightArmor	Exterior Parts & Accessories	1597	12-31-2019 02:52 PM
Roto-Fab CAI Install with Pics (5 Stars)	NVMY68SS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	120	05-23-2010 02:51 AM
Engine cover came in...GFX install sucks.	2032Ceta	5th Gen Camaro SS LS LT General Discussions	0	08-19-2009 08:20 PM