You are browsing camaro5 
 |
|
01-23-2010, 12:49 PM
|
#1 |
|
el Ruco
Drives: 2010 Camaro SS (now runnin' TENS ) Join Date: Nov 2009
Location: Fontana, CA
Posts: 7,388
|
Longer wheel studs needed.
To accomodate 'vette 18"x10.5" wheels with 315 drag slicks, 1/2" spacers look needed to get the clearance. The oem studs ain't long enough. Do any of you fellows know the stud specs, including the knurl diameter?
|
|
|
|
02-04-2010, 08:37 PM
|
#2 |
|
el Ruco
Drives: 2010 Camaro SS (now runnin' TENS ) Join Date: Nov 2009
Location: Fontana, CA
Posts: 7,388
|
Wheel stud size
The oem studs are 1/2"x 2.331" overall length. The knurl is .509. Jegs has 3.25" studs to press fit for spacer capacity; so does ARP. ARP are few bucks cheaper. Once swapped out, you'll need open ended lug nuts at 12mm-1.5 at 1/2 inch. Billet makes 'em as well as others.
|
|
|
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| CHANGING THE STEERING WHEEL (Not for the faint of heart) | VT2CA | Camaro DIY & HOW-TO instructions & discussions | 28 | 09-19-2014 03:31 PM |
| Question: Cars only driven by one wheel? | JMROD | General Automotive + Other Cars Discussion | 17 | 08-29-2010 05:04 PM |
| Tire Monitoring System | monevz28 | Camaro Issues / Problems | Warranty Discussions | TSB and Recalls | 7 | 11-22-2009 04:42 PM |
| Steering wheel leather cracking!! | meliss7567 | Camaro Issues / Problems | Warranty Discussions | TSB and Recalls | 5 | 09-17-2009 03:13 PM |
| Current wheel & design,just an observation | nitrokid | Wheels and Tires Talk Sponsored by The Tire Rack | 5 | 07-25-2008 01:33 PM |
