What's the highest HP/TQ dyno #'s on the site for a STOCK LS3? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

topgun1 · 03-22-2010, 01:08 PM

I wanted to see who can claim the highest HP and/or TQ dyno numbers so far for a stock LS3?

hot_rod · 03-22-2010, 01:28 PM

Michael_Js · 03-22-2010, 01:33 PM

I've seen a couple of stock SS's with 380 RWHP at our BBK performance meet a few weeks ago. I'm sure they'll post here. Makes you kind of disappointed when you've done so many mods and you get the same thing :(
I need a tune...

topgun1 · 03-22-2010, 01:38 PM

Quote:

Originally Posted by Michael_Js

I've seen a couple of stock SS's with 380 RWHP at our BBK performance meet a few weeks ago. I'm sure they'll post here. Makes you kind of disappointed when you've done so many mods and you get the same thing :(
I need a tune...

Wow, those are serious numbers for stockers. Yeah, this is true! or even a couple horses less! I know that the numbers can vary between cars probably 25-30 hp and very dependent on weather conditions. I hear ya, I need a tune too. But I'll plan on tuning the car once I get some new headers down the road (oh and a tuner).

v6sonoma · 03-22-2010, 01:55 PM

My adjusted numbers were 368hp 372tq need to make an appointment to go back now that my exhaust is on before I do intake. Not expecting much but I want to see what each nets me.

THE EVIL TW1N · 03-22-2010, 02:46 PM

Quote:

Originally Posted by topgun1

I wanted to see who can claim the highest HP and/or TQ dyno numbers so far for a stock LS3?

being that the LS3 is SAE Certified, they are all going to make the same HP within 1% of the rated HP. The variance you will see in dyno numbers have to do with weather, tire pressure, engine/oil temp, how tight they strapped down the vehicle, and wheel/tire size.

And then you have to throw in the tolerances of the drivetrain (transmission, driveshaft, rearend/differential, half-shafts, etc...).

Pope Designs · 03-22-2010, 02:47 PM

654 rwhp stock block. 7psi.

topgun1 · 03-22-2010, 02:54 PM

nice numbers on the 'stock' supercharger!

Michael_Js · 03-22-2010, 03:11 PM

Quote:

Originally Posted by THE EVIL TW1N

being that the LS3 is SAE Certified, they are all going to make the same HP within 1% of the rated HP. The variance you will see in dyno numbers have to do with weather, tire pressure, engine/oil temp, how tight they strapped down the vehicle, and wheel/tire size.

And then you have to throw in the tolerances of the drivetrain (transmission, driveshaft, rearend/differential, half-shafts, etc...).

We had a couple dozen done on the same day, same shop, same conditions. They varied quite a bit! No where near 1% of the rated HP! Hopefully they'll post up here as we all got our dyno sheets e-mail to us...

speedster · 03-22-2010, 03:18 PM

Go by the SAE rating.

Dyno numbers can be all over the place.

THE EVIL TW1N · 03-22-2010, 03:24 PM

Quote:

Originally Posted by Michael_Js

We had a couple dozen done on the same day, same shop, same conditions. They varied quite a bit! No where near 1% of the rated HP! Hopefully they'll post up here as we all got our dyno sheets e-mail to us...

you can strap and unstrap the same car and the dyno will spit out different numbers. that's just the nature of dyno's.

topgun1 · 03-22-2010, 05:06 PM

Quote:

Originally Posted by speedster

Go by the SAE rating.

Dyno numbers can be all over the place.

Mine was SAE adjusted. The dyno shop's AWD dyno was set up for turbo cars.

I'm trying to get a local group together to go to the dyno shop so we can use the same dyno on the same day under the same weather conditions.

speedster · 03-22-2010, 05:16 PM

Quote:

Originally Posted by topgun1

Mine was SAE adjusted. The dyno shop's AWD dyno was set up for turbo cars.

I'm trying to get a local group together to go to the dyno shop so we can use the same dyno on the same day under the same weather conditions.

That's a great idea - getting a bunch together at once. That way you will get a good baseline and as you perform future upgrades you will really be able to see the gains.

topgun1 · 03-22-2010, 05:39 PM

Yes, and it's less expensive too. Unfortunately, I only have a couple of people in the area interested.

03-22-2010, 01:08 PM	#1
topgun1 Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008 Location: Winston-Salem, NC Posts: 1,939 View My Garage	What's the highest HP/TQ dyno #'s on the site for a STOCK LS3? I wanted to see who can claim the highest HP and/or TQ dyno numbers so far for a stock LS3? __________________ 5th Gen Camaros of the Carolinas SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears.... Last edited by topgun1; 03-22-2010 at 05:41 PM.

03-22-2010, 01:33 PM	#3
Michael_Js SoCal C5 Family Member Drives: 2010 Camaro SS/RS - Black w/IOM; 6M Join Date: Jul 2009 Location: San Diego, CA, USA Posts: 5,298 View My Garage	I've seen a couple of stock SS's with 380 RWHP at our BBK performance meet a few weeks ago. I'm sure they'll post here. Makes you kind of disappointed when you've done so many mods and you get the same thing :( I need a tune... __________________ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~ 2010 Black 2SS/RS; 6M; IOM, GFX, sunroof; ADM Race CAI; Zoomers CB; Viper Alarm; Pdaft F&R sways, Adj Endlinks, Rtrailing arms, Camber kit, strut brace, Front Trailing Arm Bushing; SLP Skip-Shift Elim; Tinted lights/windows; Hurst Short-throw; LoJack; Door & Dash ABL Mods; ********; JBA Shorty headers; AACStyle LEDs; Stillen DS rotors, Hawk Ceramic pads; Havoc Blk Chrome wheels: 20x9s; Lingenfelter Blk Al Pedals; RevXtreme Catch Can; Goodridge SS lines; Ported TB; RK Sport hood; Hotchkis chassis brace; KW V3 coilovers;

03-22-2010, 01:55 PM	#5
v6sonoma Drives: 2010 SS RS Join Date: Jun 2009 Location: Providence, RI Posts: 8,108 View My Garage	My adjusted numbers were 368hp 372tq need to make an appointment to go back now that my exhaust is on before I do intake. Not expecting much but I want to see what each nets me. __________________ Mods: BBK Intake, BBK LT's and High Flow Cats, Corsa Cat-back exhaust, Hurst short throw shifter, SLP skip-shift eliminator. 7/1/09 Placed order for IOM/IO int/ SS/RS 6M 9/26/09 Took delivery!

03-22-2010, 02:54 PM	#8
topgun1 Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008 Location: Winston-Salem, NC Posts: 1,939 View My Garage	nice numbers on the 'stock' supercharger! __________________ 5th Gen Camaros of the Carolinas SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears....

03-22-2010, 03:18 PM	#10
speedster SST... Drives: SST Camaro 2010 Join Date: Oct 2008 Location: East Coast of Florida Posts: 5,927 View My Garage	Go by the SAE rating. Dyno numbers can be all over the place. __________________

03-22-2010, 01:28 PM	#2
hot_rod Drives: 2010 2SS RS Join Date: Feb 2010 Location: Texas Posts: 1,222 View My Garage

03-22-2010, 02:47 PM	#7
Pope Designs Drives: 2013 ZL1 Rally Yellow Join Date: May 2009 Location: Knightdale, NC Posts: 347	654 rwhp stock block. 7psi.

03-22-2010, 05:39 PM	#14
topgun1 Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008 Location: Winston-Salem, NC Posts: 1,939 View My Garage	Yes, and it's less expensive too. Unfortunately, I only have a couple of people in the area interested. __________________ 5th Gen Camaros of the Carolinas SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LS3 CAM AND HEADERS DYNO	ADM PERFORMANCE	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	53	02-13-2016 07:15 PM
Vararam CAI Testing on Dyno at England Green Racing (Pix, Vids, RESULTS!!!)	TAG UR IT	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	113	01-05-2011 04:32 PM
LS3 engine specifications	Tran	Wiki	3	10-06-2010 11:56 PM
What do you think the MAX HP rating is on the stock LS3	Mayhem Matt	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	21	11-24-2009 03:39 PM
C6 LS3 Stock Dyno Numbers	TomServo	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	23	01-22-2009 10:51 AM