Shifter - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

*Mr. Wyndham* · 03-21-2007, 07:48 PM

what do you think the chances are that the shifter housing, or base stays the same in the production model?
I mean, in almost every car you see with a manual, the shifter is covered in that nasty leather...this looks good with the metal covering, do you think it'll stay?

*KILLER74Z28* · 03-21-2007, 08:10 PM

Here's what I see happening if the shifter stays the same for production. Dust and grime causing major blemishes on the aluminum/most likely plastic cover. Probably going to see that switched over to some kind of boot. You never know…

Moose · 03-21-2007, 09:42 PM

I would be surprised if it wasn't similar to what's in the 4th Gen., a boot.

I think it would be really cool if it was similar to the concept, but a boot is cheaper, and makes it easier for maintenance, for enthusiasts who want to change shifters, etc.

Moosen75 · 03-21-2007, 11:36 PM

as long as the gauges stay where they are like in the first gens i will be happy

*TAG UR IT* · 03-22-2007, 12:04 AM

Have a feeling the shifter might change...but I betcha they keep it the same and use different, less costly materials to keep the look. It wouldn't be good for them to go back to the boot. They should be trying to get away from the old "styling" (or lack there of) of the 4th Gen and spice it up for this next Generation Camaro. I'd be very dissapointed if they went back to the old boot style. I want something NEW, for cryin' out loud.

03-21-2007, 07:48 PM	#1
Mr. Wyndham I used to be Dragoneye... Drives: 2018 ZL1 1LE Join Date: Jan 2007 Location: Buffalo, NY Posts: 31,873	Shifter what do you think the chances are that the shifter housing, or base stays the same in the production model? I mean, in almost every car you see with a manual, the shifter is covered in that nasty leather...this looks good with the metal covering, do you think it'll stay? Attached Images __________________ *"Keep the faith."* - Fbodfather

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Exclusive: Q&A with the Fbodfather (from 8/8/06)	KILLER74Z28	5th Gen Camaro SS LS LT General Discussions	19	03-27-2009 11:08 AM
2007 Roush Roadster	KILLER74Z28	General Automotive + Other Cars Discussion	15	01-29-2007 08:53 PM

03-21-2007, 08:10 PM	#2
KILLER74Z28 MOD SQUAD Drives: 2G1FT1EW9A9100666 Join Date: Aug 2006 Location: West Michigan Posts: 5,768	Here's what I see happening if the shifter stays the same for production. Dust and grime causing major blemishes on the aluminum/most likely plastic cover. Probably going to see that switched over to some kind of boot. You never know…

03-21-2007, 09:42 PM	#3
Moose Moderator Drives: '99 Camaro SS #1392 Join Date: Jun 2006 Location: Newtown, Pa. Posts: 3,982	I would be surprised if it wasn't similar to what's in the 4th Gen., a boot. I think it would be really cool if it was similar to the concept, but a boot is cheaper, and makes it easier for maintenance, for enthusiasts who want to change shifters, etc.

03-21-2007, 11:36 PM	#4
Moosen75 Drives: Junk til 2008 Join Date: Jan 2007 Location: Philadelphia, Pa Posts: 173	as long as the gauges stay where they are like in the first gens i will be happy

03-22-2007, 12:04 AM	#5
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,544	Have a feeling the shifter might change...but I betcha they keep it the same and use different, less costly materials to keep the look. It wouldn't be good for them to go back to the boot. They should be trying to get away from the old "styling" (or lack there of) of the 4th Gen and spice it up for this next Generation Camaro. I'd be very dissapointed if they went back to the old boot style. I want something NEW, for cryin' out loud.