who sells aftermarket rear ends / diff (or diff parts) for the 2010 camaro - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

fastfaster · 06-09-2010, 04:28 PM

who sells aftermarket rear ends/ diff (or diff parts) for the 2010 camaro

*mlee* · 06-09-2010, 04:48 PM

I know Jannetty Racing does upgrades on them but I'm pretty sure you need a core or send original.

Might check with them anyway...

Apex Paul · 06-09-2010, 06:18 PM

What are you looking for? A housing? Complete set-up? How much are you planning to abuse it, i.e. how strong are you looking for?

Camaro21 · 06-09-2010, 06:50 PM

Andy at ADM Performance is doing a Swap for me. I am getting 3.73 gears and he is just exchanging the rear end assembly out. It will take him about an hour to complete.

fastfaster · 06-10-2010, 12:15 PM

Quote:

Originally Posted by Apex Paul

What are you looking for? A housing? Complete set-up? How much are you planning to abuse it, i.e. how strong are you looking for?

im looking for a stronger complete pumpkin that can be bolted to my axles. if that cant be found, i'd like to buy stonger internals to upgrade mine.
stronger than stock would be nice

Melson · 06-10-2010, 01:10 PM

Andy at ADM swapped mine and it took about 45 mins or so........

GFORCE1320 · 06-16-2010, 08:41 PM

Our new 35 spline spools are now ready

Now we just need to make some matching 35 spline stubs to go along with our current axle line up to work with the spools.

Thanks
Chris

Hendrix-Engineering · 06-16-2010, 11:14 PM

We will have the 9 inch IRS ready in about 30 days,buy the best parts once and never look back

fastfaster · 06-17-2010, 07:16 AM

Quote:

Originally Posted by Hendrix-Engineering

We will have the 9 inch IRS ready in about 30 days,buy the best parts once and never look back

aaarrrgggg, i need it now!!!!!!!!!!!!!

BlackCamaroSS · 06-17-2010, 07:44 AM

For those who had ADM do the swap, would you mind telling us an approximate price, and is 3.73:1 the steepest they have? Thanks.

68 Z/28 · 06-17-2010, 07:46 AM

Richmond Gears

BLWN SS · 06-19-2010, 10:53 AM

Quote:

Originally Posted by Hendrix-Engineering

We will have the 9 inch IRS ready in about 30 days,buy the best parts once and never look back

Is this a direct bolt in replacement? What ratios available? Pricing?

I just wasted my posi and am looking to upgrade the whole dam thing once!

Hendrix-Engineering · 06-23-2010, 09:52 AM

Quote:

Originally Posted by BLWN SS

Is this a direct bolt in replacement? What ratios available? Pricing?

I just wasted my posi and am looking to upgrade the whole dam thing once!

Yes this is a direct bolt in,you will provide your on posi and gear .The gear chioces for a 9 inch are almost unlimited ,from 2.30s-6.40s!! and starting at $140

Ill have a thread started and some pictures real soon

There will be a limited number so if you would like to get in on the first run you need to give me a call 980-521-0722 thanks. This kit will come with the bolt in nine inch housing,heavy duty drive shaft with 1350 u joints,our huge axles with custom cvs,stongest avalible,and 300 m inners and outers.A complete solution,do it once and forget about it!

GFORCE1320 · 06-24-2010, 06:59 PM

We have the bolt in 12 bolt and 9 inch IRS in work. The MOD-12 IRS rear will be available in both a 12 bolt or 9 inch with our stubs, axles and driveshaft.
We have one of the 12 bolts (Mod-12) and our Outlaw axles in a 1,000hp car that will be in Hot Rod magazine this coming up issue. Dont think this issue will cover the rear, mainly the engine build. It's a multipart article.

We've been keeping everything pretty hush hush until we get everything geared up and into production but pricing, availability and photo's should be out soon.

Thanks
Chris

06-09-2010, 04:28 PM	#1
fastfaster Account Suspended Drives: xxxxxxxxxxxxxx Join Date: Jun 2010 Location: xxxxxxxxxxxxxxxxxxxx Posts: 479	who sells aftermarket rear ends / diff (or diff parts) for the 2010 camaro who sells aftermarket rear ends/ diff (or diff parts) for the 2010 camaro

06-09-2010, 04:48 PM	#2
mlee CamaroFans.com Drives: ZLE & ZR2 Join Date: Oct 2008 Location: Conroe, TX Posts: 37,945 View My Garage	I know Jannetty Racing does upgrades on them but I'm pretty sure you need a core or send original. Might check with them anyway... __________________

06-10-2010, 01:10 PM	#6
Melson Drives: Wild Cherry Join Date: Nov 2008 Location: Keller, Texas Posts: 430	Andy at ADM swapped mine and it took about 45 mins or so........ __________________ 2010 RJT 2SS/RS L99 CAMARO ARH 1 7/8" LT HEADERS W/ HF CATS MAGNAFLOW 3" COMP EXHAUST ADM PERFORMANCE CAI ADM PERFORMANCE CUSTOM TUNE ADM PERFORMANCE PORTED THROTTLE BODY ADM PERFORMANCE TRANS COOLER 3.45 GEARS BMR TRAILING ARMS

06-16-2010, 11:14 PM	#8
Hendrix-Engineering Account Suspended Drives: First 9 inch-12 bolt IRS Camaro Join Date: Jun 2009 Location: nc Posts: 1,835	9 inch IRS in production We will have the 9 inch IRS ready in about 30 days,buy the best parts once and never look back

06-17-2010, 07:46 AM	#11
68 Z/28 Father Time Drives: 1967 Malibu / 2002 Caddy DTS Join Date: May 2009 Location: St. Aug. , Fl. Posts: 13,547 View My Garage	Richmond Gears __________________ She's been sold ( Goodies List Updated )http://www.camaro5.com/forums/showthread.php?t=86262

06-09-2010, 06:18 PM	#3
Apex Paul Drives: Wagon Queen Family Truckster Join Date: Oct 2009 Location: Louisville, Ky Posts: 1,476	What are you looking for? A housing? Complete set-up? How much are you planning to abuse it, i.e. how strong are you looking for?

06-09-2010, 06:50 PM	#4
Camaro21 Drives: SOLD - 2013 M6 ZL1 Join Date: Jul 2009 Location: Texas Posts: 5,040 View My Garage	Andy at ADM Performance is doing a Swap for me. I am getting 3.73 gears and he is just exchanging the rear end assembly out. It will take him about an hour to complete.

06-16-2010, 08:41 PM	#7
GFORCE1320 Drives: 05 GTO Join Date: Jul 2009 Location: Wichita, KS Posts: 1,243	Our new 35 spline spools are now ready Now we just need to make some matching 35 spline stubs to go along with our current axle line up to work with the spools. Thanks Chris

06-17-2010, 07:44 AM	#10
BlackCamaroSS Old school SS, junior Drives: Many; all Chevrolet Join Date: Jun 2009 Location: DFW Posts: 100	For those who had ADM do the swap, would you mind telling us an approximate price, and is 3.73:1 the steepest they have? Thanks.

06-24-2010, 06:59 PM	#14
GFORCE1320 Drives: 05 GTO Join Date: Jul 2009 Location: Wichita, KS Posts: 1,243	We have the bolt in 12 bolt and 9 inch IRS in work. The MOD-12 IRS rear will be available in both a 12 bolt or 9 inch with our stubs, axles and driveshaft. We have one of the 12 bolts (Mod-12) and our Outlaw axles in a 1,000hp car that will be in Hot Rod magazine this coming up issue. Dont think this issue will cover the rear, mainly the engine build. It's a multipart article. We've been keeping everything pretty hush hush until we get everything geared up and into production but pricing, availability and photo's should be out soon. Thanks Chris

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Im sure this has been asked before.. But forgive my innocence :)	gmag21	Suspension / Brakes / Chassis	23	02-21-2010 11:29 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM