Flat black vinyl bowtie - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

francone13 · 04-13-2010, 09:37 AM

Where can i buy flat black vinyl bowtie's for the Camaro?

SNV · 04-13-2010, 10:54 AM

I would just order some flat black vinyl and do your own cuts. You can buy a sheet of vinyl for around $6. It would give you enough to do around 6 sets of bow ties. I bought mine off ebay. I think I ordered from this person http://stores.ebay.com/metrodecals-Restyling

masterofpuppets · 04-13-2010, 11:39 AM

Quote:

Originally Posted by SNV

I would just order some lat black vinyl and do your own cuts. You can buy a sheet of vinyl for around $6. It would give you enough to do around 6 sets of bow ties. I bought mine off ebay. I think I ordered from this person http://stores.ebay.com/metrodecals-Restyling

Amen. I went to a local sign shop and bought a 2'x2' sheet for 5 bucks. I had the precut ones and screwed them up. Doing the sheets was sooooo much easier.

steallife904 · 04-13-2010, 12:11 PM

i say get them painted

got mine painted and it looks great!

rtcat600man · 04-15-2010, 09:10 PM

Quote:

Originally Posted by masterofpuppets

Amen. I went to a local sign shop and bought a 2'x2' sheet for 5 bucks. I had the precut ones and screwed them up. Doing the sheets was sooooo much easier.

BINGO...........I bought the pre cut ones off EBAY too. Front one did not work out at all. The rear one was fine. I then researched more on the forum and found out the same thing just get a large piece of vinyl and overlay the whole area and cut the excess off. So I went to a friend of mine who owns a sign shop and got a large scrap piece and did the front one this evening.

mcdoogle6969 · 04-16-2010, 10:27 AM

I think it was pretty easy just to buy vinyl and make the cuts yourself.

Name: 100_0375.jpg
Views: 1669
Size: 158.9 KB

LosXC451 · 04-16-2010, 06:28 PM

just buy a piece of flat black vinyl from a sticker shop and do it yourself
when i did it on mine car i began putting a rectangle of vinyl that would cover the whole bowtie (starting from the center for the back bowtie and from the left or right on the front), for the front just stretch it over until you get it on. It might take a couple tries for the front but the back goes right on

autoguy · 04-17-2010, 12:00 AM

We have pre-cut ones here.... http://www.ridergraphix.com/2010_Cam..._Blackout.html

SNV · 04-17-2010, 12:12 AM

Quote:

Originally Posted by autoguy

We have pre-cut ones here.... http://www.ridergraphix.com/2010_Cam..._Blackout.html

I'm really not trying to be an a** but most of us have now figured out there is no need to spend $30 for a set. You get get enough vinyl to do 3 sets for under $10. I'm really not trying to bash you so please don't take it that way. I just find it unreal what some are making off parts. Just like people charging around $40 shipped for a dome and trunk like when the can be had for under $10 shipped. Againg it's not a shot at you.

cybergm10 · 04-17-2010, 01:05 AM

i did vinyl on my bowtie and it worked great i've had it on for 6 months and it dint peel or get messed up in anyway due to weather. cheap and very effective

bluch · 04-17-2010, 01:07 AM

got mine from a member on here. XMICRO_SS.

autoguy · 04-17-2010, 09:00 AM

Quote:

Originally Posted by SNV

I'm really not trying to be an a** but most of us have now figured out there is no need to spend $30 for a set. You get get enough vinyl to do 3 sets for under $10. I'm really not trying to bash you so please don't take it that way. I just find it unreal what some are making off parts. Just like people charging around $40 shipped for a dome and trunk like when the can be had for under $10 shipped. Againg it's not a shot at you.

Not everyone is comfortable buying a sheet of vinyl and taking a razor blade to their car. Some people do not have the time to go out running around looking for it either, so there are other options for them.

PieManMighty · 05-20-2010, 08:58 PM

Ordered mine pre-cut from Rider Graphix today and put them on. I think they came out great, applied both dry!

rtcat600man · 05-20-2010, 09:40 PM

Nice Job. glad to see it worked out for you.

04-13-2010, 09:37 AM	#1
francone13 Drives: 2010 Camaro 2LT/RS Join Date: Nov 2008 Location: Toronto Posts: 280	Flat black vinyl bowtie Where can i buy flat black vinyl bowtie's for the Camaro?

04-13-2010, 10:54 AM	#2
SNV Drives: 2014 RRM 2ls Join Date: Jul 2009 Location: NJ Posts: 1,307 View My Garage	I would just order some flat black vinyl and do your own cuts. You can buy a sheet of vinyl for around $6. It would give you enough to do around 6 sets of bow ties. I bought mine off ebay. I think I ordered from this person http://stores.ebay.com/metrodecals-Restyling __________________ 2010 IBM 1LT out. 2013 BRM 1LS in. It's like having a blank canvas once again. Modding has started! Now on to a 2014...... Last edited by SNV; 04-13-2010 at 11:52 AM.

04-13-2010, 12:11 PM	#4
steallife904 Drives: 2010 iom camaro 2lt Join Date: Mar 2010 Location: Jacksonville, Fl Posts: 192 View My Garage	i say get them paintedgot mine painted and it looks great!

04-16-2010, 06:28 PM	#7
LosXC451 Drives: 2010 SS SIM w/ RS Join Date: Feb 2009 Location: Miami, Fl Posts: 1,222 View My Garage	just buy a piece of flat black vinyl from a sticker shop and do it yourself when i did it on mine car i began putting a rectangle of vinyl that would cover the whole bowtie (starting from the center for the back bowtie and from the left or right on the front), for the front just stretch it over until you get it on. It might take a couple tries for the front but the back goes right on __________________ My car: http://www.camaro5.com/forums/showthread.php?t=17740

04-17-2010, 01:07 AM	#11
bluch OH CANADA! Drives: 2011 RAM 1500 LARAMIE Join Date: Mar 2009 Location: Edmonton, AB, CAN Posts: 3,930 View My Garage	got mine from a member on here. XMICRO_SS. Attached Images __________________ Had to trade in the Camaro for a truck :(, but hopefully I can join the Camaro family again one day

04-16-2010, 10:27 AM	#6
mcdoogle6969 Drives: 2010 Camaro SS, 2008 Heritage 300C Join Date: Jun 2009 Location: Wisconsin Posts: 1,911	I think it was pretty easy just to buy vinyl and make the cuts yourself.

04-17-2010, 12:00 AM	#8
autoguy Drives: 10 SS,11 SS Pace, 13 ZL1 IOM Join Date: Oct 2008 Location: Pennsylvania Posts: 1,733 View My Garage	We have pre-cut ones here.... http://www.ridergraphix.com/2010_Cam..._Blackout.html

04-17-2010, 01:05 AM	#10
cybergm10 Drives: 2010 Camaro Join Date: Dec 2009 Location: NJ Posts: 68	i did vinyl on my bowtie and it worked great i've had it on for 6 months and it dint peel or get messed up in anyway due to weather. cheap and very effective

05-20-2010, 08:58 PM	#13
PieManMighty Manual 6 Speed Tran. Drives: 2010 2LT Camaro IOM Join Date: May 2010 Location: Philly Area (Bristol) PA Posts: 239 View My Garage	Ordered mine pre-cut from Rider Graphix today and put them on. I think they came out great, applied both dry! Attached Images __________________ EXHAUST , CAI , TINT , CALIPERS , SPOILER & SILLS , GILLS, BOW TIES , LED'S , AFTERBURNERS , COVERS , HID'S & HALOS, MOLDING

05-20-2010, 09:40 PM	#14
rtcat600man having FUN now 13.66@101 Drives: 2010 2LT IOM Join Date: Nov 2009 Location: Clarkston, Michigan Posts: 9,230 View My Garage	Nice Job. glad to see it worked out for you. __________________ MY BUILD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New Jersey (and area) check-in thread	SirBrad	USA - NY / NJ / PA	458	06-10-2014 06:13 AM
Flat black stripes, black bowties, black chrome wheels...	bill12690	Cosmetics and Lighting Modification Discussions	38	04-22-2010 10:22 PM
Black stripe package = flat or gloss black?	jordan 572	Cosmetics and Lighting Modification Discussions	24	01-26-2010 08:24 PM
Anyone make a rear flat black out panel where the bowtie emblem is?	55Designs	Cosmetics and Lighting Modification Discussions	11	12-05-2009 07:57 PM
red black carbon fiber bowtie ?	alexdc	Cosmetics and Lighting Modification Discussions	6	11-16-2009 09:32 PM