09-08-2009, 01:44 PM | #1 |
Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009
Location: El Paso
Posts: 2,973
|
Lingenfelter 650 hp build w/pics
I am starting this new thread because there are a few members cars at LPE as I type. We have both the 570 and 650 packages going on.
Ryan promised pictures along the way so I will keep updating as we move along. From now on I will post the updates and pictures in a new post further in the thread. Mine is a Blk 2SS/RS, M6 package dicribed below: Camaro Gen 5 - 2010 > Camaro SS 2010 378 CID LS3 - 650 HP TVS2300 Supercharger Package 650 BHP / 630 lbs-ft of torque - Engine removal, disassembly and inspection - Lingenfelter CNC porting of LS3 cylinder heads - Lingenfelter multi-angle valve job, cc cylinder chambers - OE 2.165" hollow stem intake / 1.59" heavy duty Inconnel exhaust valves - Surfacing for correct compression, Competition Cams valve springs - Mahle forged coated aluminum pistons and tool steel pins - Oliver 4340 forged billet steel “I” beam connecting rods - Computer balanced LS3 crankshaft & rotating assembly - Total seal file fit rings - Clevite Heavy duty rod & main bearings - Head gaskets, head bolts - TVS2300 intercooled supercharger system - Black powder coated finish - Based on OEM Eaton supercharger unit - Fuel system upgrades and properly sized fuel injectors - 160 Degree thermostat - Ported & polished LS3 throttle body - Lingenfelter High Flow Air Intake - Boost by pass system - Professional engine installation, testing & tuning - Chassis dyno report before & after installation - Excellent drivability, highway mileage not adversely affected - Lingenfelter 3 year/ 36,000 mile warranty - Lingenfelter certificate of authenticity Dual disc clutch and flywheel assembly Lingenfelter aluminum coil covers Corsa stainless steel cat back exhaust Chrome LPE fender badges HD rear half shafts Ryan and LPE made good on the Baseline Dyno Sheet! He said my engine has been pulled and he will try to get the first photo updates to us later today. Thanks Ryan! Last edited by mws444; 09-11-2009 at 06:44 PM. Reason: Baseline update |
09-08-2009, 01:58 PM | #2 |
|
With it being rebuilt with forged internals, is 650 the most you can get safely or just the most they will warrantee? Seems like it could take a LOT more.
That's is going to be quite the car when it's done.
__________________
2010 1SS RS, LS3, SIM/Black, painted rally stripes, AAC sidemarkers, Sunroof, B.A. sound sys; 20x9.5 & 20x11 SV1-C5's; MGW short shifter; Hotchkis Track Pack; Corsa catback; Kooks 1 7/8"; ADM Street; Magnacharger TVS2300 - 548rwhp/512rwtq
1100- 2/18/09; 3800- 6/15/09 VIN#18308; Delivered 6/29/09!!!!! 2014 CTS-V Sedan, Black/Black, Auto, Recaros, Ultra-view, Red Brembos. Stock |
09-08-2009, 02:06 PM | #3 |
Okie doke
|
Definately going to be a fun ride
__________________
|
09-08-2009, 02:18 PM | #4 | |
Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009
Location: El Paso
Posts: 2,973
|
Quote:
LPE wont go over the 570 HP without doing the internals, I am sure this is for the warranty. I know you can go a lot higher but you will have to run higher than 93 octane gas to keep it together. Not much if you drive it much. |
|
09-08-2009, 02:31 PM | #5 |
Drives: four wheels Join Date: Oct 2007
Location: usa
Posts: 585
|
Sweet. I'm sure it will be awesome $20k is a serious package.
|
09-08-2009, 02:48 PM | #6 |
Drives: 2010 Camaro, 09 mini, 01 3500 Join Date: Aug 2009
Location: Albuquerque
Posts: 377
|
mws, have you heard anything on the progress of your car?
|
09-08-2009, 02:55 PM | #7 | |
Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009
Location: El Paso
Posts: 2,973
|
Quote:
I guess it is just part of being married, although she did give me the car is yours but the bathroom is all of ours. I guess I am lucky she lets me indulge my car passion and will actually enjoy some of it with me. Just hope I can stay out of the kitchen remodeling business. |
|
09-08-2009, 03:44 PM | #8 |
Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009
Location: El Paso
Posts: 2,973
|
Just emailed Ryan for an update, also asked for the baseline dyno sheet and will post it up when I get it.
Ryan has been really cool about all of my changes, LPE are a great bunch of guys to deal with, they even had my windows tinted while it was up there. |
09-08-2009, 04:16 PM | #9 |
Drives: 91 Camaro, 95 Trans am Join Date: Jul 2009
Location: Barboursville Wv
Posts: 46
|
For what all is included it's not that bad of a price. I would just expect more power out of a setup like that.
|
09-08-2009, 04:19 PM | #10 |
Drives: The Imperial Army Join Date: Feb 2009
Location: The Darkside
Posts: 15,742
|
nice
|
09-08-2009, 08:45 PM | #11 |
Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008
Location: Sioux Falls, SD
Posts: 1,640
|
|
09-08-2009, 08:54 PM | #12 |
Drives: Not enough room here! Join Date: Jul 2009
Location: Plainfield, IL
Posts: 1,017
|
There is a certain point where "more power" becomes a moot point. Longevity and drive ability get affected. If you can't apply it to the pavement, it's useless. 3000 HP isn't going to help unless one can control it. If someone wants to build a car strictly for the track, then that's a different story. It's bad enough trying to show enough self control in ever day driving to keep from blowing the doors off every Mustang you see!
__________________
BEWARE OF THE LPE BROTHERHOOD!
Remember: You can sleep in your car, but you can't drive your house! |
09-08-2009, 09:18 PM | #13 |
Master of Medicine
Drives: 4th Gen Join Date: Oct 2008
Location: Kentucky
Posts: 784
|
This is for sure the way to do it if you desire boost + longevity...If I had the money when I started this would have been the way I would have gone...with the 2300 and shot for 14 psi...But when you start making more power, then the rear end and tranny become issues...I know I'm probably pushing it for longevity on the tranny, you 6sp manual guys are already seeing some of that stuff. We have heard rumors the rear is good to 600rwhp, but a shortblock like LPE is mentioning with a 2300 at 12-14psi would be WELL past that...if you want to run with the GT500's this is what you MUST do, but be prepared to start replacing driveline parts if you do...
...just sayin'
__________________
2002 Camaro SS. 408 LS2. 500+RWHP/480RWTQ. Full UMI RR suspension. Koni/Strano. 295F/315R. 3500#(55/45)
|
09-09-2009, 09:41 AM | #14 | |
Drives: four wheels Join Date: Oct 2007
Location: usa
Posts: 585
|
Quote:
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Lingenfelter Performance Engineering Customers | Windy City | Forced Induction - V8 | 7644 | 03-22-2019 04:05 PM |
got my build sheet | demomaster | Camaro Price | Ordering | Tracking | Dealers Discussions | 18 | 02-20-2011 10:40 PM |
Lingenfelter 2010 Camaro Engine Packages - up to 800hp! | Sizzox | 5th Gen Camaro SS LS LT General Discussions | 108 | 04-14-2010 07:09 PM |
My Lingenfelter Camaro Build | Speed74SS | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 244 | 10-08-2009 10:00 PM |
Lingenfelter Supercharged Camaro makes 600 RWHP!! | Kevin@Lingenfelter | Forced Induction - V8 | 218 | 06-24-2009 02:26 PM |