Spring swap write up's? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MAZZ77X · 12-06-2010, 09:43 PM

I'm about to tackle a spring swap front and rear. I got a set of BMR springs, 1.4/1.0 and would love to read a few write up's of the job at hand just to familiarize my self.

Also the springs look very similar to each other (Front/Rear) and it's hard to tell them apart. Shouldn't the fronts look a lot beefier than the rears? No identification marks on them either.

BMR Suspension · 12-07-2010, 10:11 AM

Quote:

Originally Posted by MAZZ77X

I'm about to tackle a spring swap front and rear. I got a set of BMR springs, 1.4/1.0 and would love to read a few write up's of the job at hand just to familiarize my self.

Also the springs look very similar to each other (Front/Rear) and it's hard to tell them apart. Shouldn't the fronts look a lot beefier than the rears? No identification marks on them either.

Your rear springs should have the SP021 part number printed on them. The front springs should have "BMR" printed (part number should be wiped off).

axis · 12-07-2010, 04:13 PM

Unless i'm mistaken, there's a nice write up in the DIY section.

Also, if you look down about halfway down the thread lists in this very section, you'll see another one.

REAPER SS · 12-07-2010, 06:43 PM

hotchkis website has a nice set of instructions with pictures. You just go to this website http://www.hotchkis.net/2010_camaro_...l_springs.html and download the instructions. You can use the direcions for any springs.

12-06-2010, 09:43 PM	#1
MAZZ77X www.njminigp.com Drives: 2010 IOM SS M6 Join Date: Nov 2010 Location: Hammonton N.J. Posts: 33	Spring swap write up's? I'm about to tackle a spring swap front and rear. I got a set of BMR springs, 1.4/1.0 and would love to read a few write up's of the job at hand just to familiarize my self. Also the springs look very similar to each other (Front/Rear) and it's hard to tell them apart. Shouldn't the fronts look a lot beefier than the rears? No identification marks on them either. __________________ 2010 SS Inferno Orange 6 speed.

12-07-2010, 04:13 PM	#3
axis Search Ninja Drives: 2010 Black 2SS/RS A6 Join Date: Oct 2009 Location: Central Ark Posts: 7,183	Unless i'm mistaken, there's a nice write up in the DIY section. Also, if you look down about halfway down the thread lists in this very section, you'll see another one. __________________ 2010 Black 2SS/RS A6 Halltech CF 102 fed GPI modded intake manifold Bo (knows) White ported TB Kooks LT's/ Dynomax VT Pfadted (springs/sways) Dyno tuned by Rhino and GPI I once parallel parked a train.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LS7 Swap	MTI Racing Kevin	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	0	09-27-2010 01:12 PM
2010 v6 camaro swap into thirdgen	IROCTPI	3rd Generation Camaros	1	07-30-2010 10:41 AM
V6 swap down the road?	jhoward7285	5th Gen Camaro SS LS LT General Discussions	6	07-16-2010 03:45 PM
engine swap or supercharge or twin turbo?	zayzaydaboss	5th Gen Camaro SS LS LT General Discussions	35	06-11-2010 12:07 PM
Discussion of suspension tuning methodologies	Tankrust	Wheels and Tires Talk Sponsored by The Tire Rack	10	08-04-2009 07:39 PM

12-07-2010, 06:43 PM	#4
REAPER SS Drives: 2010 CAMARO BLK 2SS/L99 Join Date: May 2009 Location: Birmingham,Al Posts: 453	hotchkis website has a nice set of instructions with pictures. You just go to this website http://www.hotchkis.net/2010_camaro_...l_springs.html and download the instructions. You can use the direcions for any springs.