CAM help

[MikeLA2011ss]

How's it going guys I have a 2011 SS ( ARH LT headers+sp+exhaust+cai+tune) I'm looking to do a cam, I want the most gains out of it, what's the best cam to go with and what size, also who's really gOod for install and tune? I live in Louisiana, thanks

[rdblan2]

Future mod plans? How do you drive your car? What are your goals?

Lots of good shops over in Texas. I see them popping in here every now and again. Lots of experience here. Answer those questions and a lot of people will guide you to a good choice.

[BLACK10]

Check out LETHAL RACING in Lafayette. They are right off ambassador caffery. My car is there now getting an even bigger cam. First class top notch shop. Brand new dyno and lifts.

They are a sponsor on Camaro5 also.

Here is his number. You can call him anytime.

Shawn
+1 (337) 258-7692

He has done MANY cars around our area

[freemaSSon]

G6X3 for balls out giddy up and go.

It sprays pretty well too

[T-RO 2SS]

Straight Performance Racing here in Baton Rouge does great work. The owners forum name is g4dadon shoot him a PM great guy to work wt. Super clean installs he knows his stuff. Everything from 1000 plus hp or just simple bolt on and tunes.

[Chris@SPMC]

We just finished up this customer's car from Louisiana...

http://www.camaro5.com/forums/showthread.php?t=169423

Feel free to contact me with any questions about the goals of your car and I'll get you taken care of, thanks.

[haycosol1]

http://www.camaro5.com/forums/showthread.php?t=162836 A thread i started but but everyone has there own opinion.

[navyblueSS]

Futral Motorsports in Walker, LA. One of the best in the business, my car will be going down there in October for cam swap. Allan built the motor in my 02SS.

[MikeLA2011ss]

Originally Posted by rdblan2

Future mod plans? How do you drive your car? What are your goals?

Lots of good shops over in Texas. I see them popping in here every now and again. Lots of experience here. Answer those questions and a lot of people will guide you to a good choice.

future mods at the beggining of 2012 summer, centrif. supercharger and internal work. cant wait for that but for now i definitely want a nice big, choppy, huge hp gain cam. i dynoed 400hp with my set up right now, my goal is 460 with a cam....

[MikeLA2011ss]

i def need another tune, idk what is wrong or if it is a problem at all ( my car runs great) but at idle it sounds like i already have a small cam. lol. it happened after tune. The guy hooked up his computer and said my o2 is not syncing properly? could be causing my rpms to bounce...its not running lean or rich... well 7% lean but not enough to cause rpm bounce...any suggestions? retune? jw what are camaros running in the 1/4 with a set up like mine w/ drags...( lt headers,sp, exhaust (all 3 inch) cai, tune)?

[MikeLA2011ss]

to answer the ?'s.... i def dont dog my car, i usually take it easy. obviously i get on it sometimes but i respect a nice car and take care of it......my goals are 650-700...thanks everyone

[mlee]

Maybe I missed it somewhere... LS3 or L99?

If you don't get hooked up with Lethal... we have a bunch of great shops here in Houston...

[BLACK10]

Originally Posted by MikeLA2011ss

i def need another tune, idk what is wrong or if it is a problem at all ( my car runs great) but at idle it sounds like i already have a small cam. lol. it happened after tune. The guy hooked up his computer and said my o2 is not syncing properly? could be causing my rpms to bounce...its not running lean or rich... well 7% lean but not enough to cause rpm bounce...any suggestions? retune? jw what are camaros running in the 1/4 with a set up like mine w/ drags...( lt headers,sp, exhaust (all 3 inch) cai, tune)?

460 is easily do-able. with the mods you have and with drag radials you would be in the 12's. how far into the 12's depends on how good you are at launching a manual(if thats what you have). right now with the cam i have i put down 430rwhp and i was running 12.4's (in 100* heat) with drag radials and riding out the clutch slowly(1.9 60')

a friend from Jennings(2010 2-tone) made a 12.55 pass in the spring with a tune, cai and headers with drag radials.

Originally Posted by mlee

Maybe I missed it somewhere... LS3 or L99?

If you don't get hooked up with Lethal... we have a bunch of great shops here in Houston...

I'm thinking its an LS3.

[mlee]

Agree... mid 12's with those mods... add a cam and you could easiy crack the 12.0 mark as long as you can hook.