Camaro VS Mustang Mega Thread - Page 29 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

meanmike · 10-09-2009, 01:21 PM

Quote:

Originally Posted by REEFBLUE93

How much boost are you running?? That blower is essentially netting you right at 300 rwhp?? I'm not calling you a liar man, I just don't know that much about Kenne Belle superchargers I guess.

It is 15 pound's I believe. I would have to ask my mech to be sure because I will be honest when I get in it, it does get a bit scary and I dont bother looking. And I did'nt mean rwhp but at the engine rwhp is around 520 or something close I cant find the damn slip. And I did'nt use the KB tune my mech had someone else do a custom tune.

If I ever find that slip I will post it and I wont garauntee all my number's are exact but they are close.

ironpeddler · 10-09-2009, 01:21 PM

Good stuff guys, good stuff. Gave me my laugh for the day.

GQ4Life · 10-09-2009, 01:24 PM

Quote:

Originally Posted by REEFBLUE93

I'm still trying to figure out if a Kenne Belle will net you 250 HP, crank HP at that. That's what I'm seeing. I know somebody that has CAI/tune, headers and no cats on a 2007 Mustang GT that just put down 305 rwhp. That would mean that the blower added around 250 hp to your car meanmike?

kenne bell 2.8H supercharger will easily make 600wHP but I wouldnt do that on stock 4.6L block..

http://www.kennebell.net/supercharge...gt05-06_3v.htm

REEFBLUE93 · 10-09-2009, 01:24 PM

Quote:

Originally Posted by meanmike

It is 15 pound's I believe. I would have to ask my mech to be sure because I will be honest when I get in it, it does get a bit scary and I dont bother looking. And I did'nt mean rwhp but at the engine rwhp is around 520 or something close I cant find the damn slip. And I did'nt use the KB tune my mech had someone else do a custom tune.

If I ever find that slip I will post it and I wont garauntee all my number's are exact but they are close.

Cool, man those stock internals Ford is putting in those 3valves are pretty tough...lol, I have a 93 with a 308 and a Vortech pushing in 8psi. It's not making near that on the rwhp though.

meanmike · 10-09-2009, 01:24 PM

Quote:

Originally Posted by REEFBLUE93

I'm still trying to figure out if a Kenne Belle will net you 250 HP, crank HP at that. That's what I'm seeing. I know somebody that has CAI/tune, headers and no cats on a 2007 Mustang GT that just put down 305 rwhp. That would mean that the blower added around 250 hp to your car meanmike?

KB say's you will get an estimated 620 at the engine on 10 pound's and about 500 to the wheel's.

1320junkie · 10-09-2009, 01:26 PM

any of you mustang guys going to come to this? You are more than welcome to
http://www.camaro5.com/forums/showthread.php?t=46574

GQ4Life · 10-09-2009, 01:28 PM

Quote:

Originally Posted by meanmike

KB say's you will get an estimated 620 at the engine on 10 pound's and about 500 to the wheel's.

yea that pretty much limit of stock 4.6L block..

MrIcky · 10-09-2009, 01:28 PM

Quote:

Originally Posted by 1320junkie

any of you mustang guys going to come to this? You are more than welcome to
http://www.camaro5.com/forums/showthread.php?t=46574

LOL, make sure there are no sharp objects in the area.

REEFBLUE93 · 10-09-2009, 01:28 PM

Quote:

Originally Posted by GQ4Life

kenne bell 2.8H supercharger will easily make 600wHP but I wouldnt do that on stock 4.6L block..

http://www.kennebell.net/supercharge...gt05-06_3v.htm

It will add 250 hp by itself though? that was my question. I guess if you add enough boost to anything, you can get the HP #'s way up there. If you add a 300 hp shot of nitrous it would have the same effect...LOL

meanmike · 10-09-2009, 01:30 PM

Quote:

Originally Posted by 1320junkie

any of you mustang guys going to come to this? You are more than welcome to
http://www.camaro5.com/forums/showthread.php?t=46574

I would love to, but my car wont be done by then, and I dont want to run it that hard until it's complete. I am sure it is on borrowed time as it is.

GQ4Life · 10-09-2009, 01:30 PM

Quote:

Originally Posted by REEFBLUE93

It will add 250 hp by itself though? that was my question. I guess if you add enough boost to anything, you can get the HP #'s way up there. If you add a 300 hp shot of nitrous it would have the same effect...LOL

yea it takes 18 to 20psi of boost that why i wouldnt do it on stock block.. i think mustang guys saying 11 to 12 psi limit of stock block.. anything higher risking a KABOOM

REEFBLUE93 · 10-09-2009, 01:30 PM

Quote:

Originally Posted by GQ4Life

yea that pretty much limit of stock 4.6L block..

Actually the 4.6 block itself is capable of handling WAY more than that. It's the internals you'd have to be concerned with. If a connecting rod went, I would imagine that the block wouldn't be able to take that.

meanmike · 10-09-2009, 01:35 PM

I agree guy's what I'm doing may not be safe but so far so good. My mech told me I was crazy but he said if you are planning on either replacing the block or putting forged internal's in then what the hell.

1320junkie · 10-09-2009, 01:36 PM

Quote:

Originally Posted by meanmike

I would love to, but my car wont be done by then, and I dont want to run it that hard until it's complete. I am sure it is on borrowed time as it is.

It wont be done by April of next year? What are you getting done to it?

10-09-2009, 01:21 PM	#394
ironpeddler Drives: 2010 Shelby GT500 Join Date: May 2009 Location: OH Posts: 288	Good stuff guys, good stuff. Gave me my laugh for the day. __________________ Black/silver stripes 2010 GT500 http://www.youtube.com/watch?v=akc1A-Jus_k ^^^ mustang dyno video

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Poll -- Camaro vs Mustang Supercar Shootout	JusticePete	Suspension / Brakes / Chassis	105	10-09-2013 03:18 PM
Does the v6 have enough power?	cstproductions	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	305	08-29-2012 10:27 PM
Winner, winner - Jalopnik compares the Big 3	Number 3	5th Gen Camaro SS LS LT General Discussions	31	04-17-2011 04:24 PM
Im sure this has been asked before.. But forgive my innocence :)	gmag21	Suspension / Brakes / Chassis	23	02-21-2010 11:29 PM
The DEFINITIVE EXPLANATION OF CAMARO SUSPENSION, ISSUES, AND UPGRADES	Info@PeddersUSA.com	Suspension / Brakes / Chassis	106	10-19-2009 07:08 PM

10-09-2009, 01:26 PM	#398
1320junkie Drives: The Imperial Army Join Date: Feb 2009 Location: The Darkside Posts: 15,742	any of you mustang guys going to come to this? You are more than welcome to http://www.camaro5.com/forums/showthread.php?t=46574

10-09-2009, 01:35 PM	#405
meanmike Account Suspended Drives: FIRST ON RACE DAY Join Date: Feb 2009 Location: Indiana Posts: 1,170	I agree guy's what I'm doing may not be safe but so far so good. My mech told me I was crazy but he said if you are planning on either replacing the block or putting forged internal's in then what the hell.