![]() |
|
|
#29 |
![]() Drives: 2007 Corvette C6 983 RWHP Join Date: Dec 2011
Location: Montreal, Canada
Posts: 690
|
Blue is the "racing belt" and comes in very limited sizes. It does not replace the HD which is green. Different series.
__________________
2007 C6 vert, auto, F55, LT3
LME LS402 , WCCH 245 Heads, Pat G. Custom cam YSI / 3.0 pulley, ARH 1 7/8 headers, NPP Dewitts / dual spals, A&A dual pump fuel system. 3.42 polished gears, hardened shafts, Alky control meth, Cartech line lock, ECS axle loops, Trans brace, 6L80 built by me. ID 1000 injectors, comp rockers, Morel lifters, BT springs, Trend 3/8 pushrods, ATI 10% OD Damper Circle D Triple Disc stall 1009 RWHP @ 7000, 817 RWTQ @ 6000, |
|
|
|
|
|
#30 |
![]() |
Understood I just didn't see the HD version y'all are referring to when searching the gates site and couldn't find the part number listed earlier in this thread anywhere.
|
|
|
|
|
|
#31 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,155
|
Is the 060854RB still a good P/N?? Amazon says it doesn't fit my car.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
|
#32 |
![]() ![]() Drives: camaro ss\rs Join Date: Jun 2014
Location: Italia
Posts: 755
|
Which size do you have?
__________________
2014 camaro SS Whipple powered ,3.750 pulley,ID850, CAI,Flowmaster American Thunder exhaust,MGW racing shifter,Bo White ported tb,MightyMouse Catch Can,Vitesse throttle controller,GM 3.91 rear end, Dynatech longtube haders, BTR Pd cam,Fluidampr stock pulley,ZL1 fuel pump and ADM fpcm, Phastek scoop and fluid thank relocation Bmr Motor mount . Tuned by Mastuning
|
|
|
|
|
|
#33 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,155
|
I was looking at it using a 2013 not a 2010 whatever the difference is.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
|
#34 |
![]() Drives: Chevy Camaro Join Date: Mar 2022
Location: Oklahoma City
Posts: 1
|
"The Gates Part number is: K060854HD
The Dayco Part number is: 5060855HD" I am not able to find either of these part numbers anywhere except one shady website that wants $80 for the Gates K060854HD (but no photos). Were these part numbers changed in the last couple years? I had such great luck with the green belts on my truck that I don't like buying the standard ones any more... |
|
|
|
|
|
#35 |
![]() Drives: 2012 SS Join Date: Dec 2021
Location: Florida
Posts: 406
|
can't find them either. rock auto only has one listed for hp for my 12
GATES K080661RPM all the rest are either standard replacement or economy
__________________
2012 Camaro SS
|
|
|
|
|
|
#36 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 2SS, 2017 Silverado LTZ Join Date: Jan 2007
Location: Denver,PA
Posts: 3,195
|
The Eelbrock S/C comes with a sticker of the belt path to stick under the hood.
|
|
|
|
|
|
|
|
![]() |
|
|