Lingenfelter Performance Engineering Customers

[Windy City]

Originally Posted by mws444

I had the car out on Sunday, what a rush! My nephew has some sort of drag app for his IPhone. On a cold morning and a dusty asphalt road it showed a 12.6 quarter mile. Doubt it is very accurrate, but it was fun. I can already tell it is going to take some seat time to get the launch and second gear shift down to avoid wheel spin. For kicks tried a hard launch in second....think I took about 10% of the tread life out with that one. Even third gear was a stand still if you change in a hard spin like that.

Hoo Rah Dog!
Some people have all the luck! (and the warm weather)

Looks GOOD PAUL! Can't wait to see your numbers.

I'm watching for a right fitting Z06, have some other planning in the works.

Also have an architect friend of mine gearing up to start a set of drawings for a new garage, with an attached house!

[paul2010]

Originally Posted by mws444

Paul Man that is a sweet looking ride!!!!!
Something about that wide belt just says.....Get out the Way!
That poliched Maggie really looks nice in that dark engine bay as well.
Nice build!

Thanks MWS I really thought that if I was going to spend this kind of money then I must pay the extra 1000.00 for the polished version.

I am hoping I will be driving it in a matter of days with a little help from Graham and the rest of the gang!!

[paul2010]

Originally Posted by Windy City

Hoo Rah Dog!
Some people have all the luck! (and the warm weather)

Looks GOOD PAUL! Can't wait to see your numbers.

I'm watching for a right fitting Z06, have some other planning in the works.

Also have an architect friend of mine gearing up to start a set of drawings for a new garage, with an attached house!

Windy if you need any drywall or painting done for your garage let me know. I have some guys from Chicago working for me at a project in Merrillville. The best drywall hangers and finishers in the country. We are doing a 40,000 sheet job in Merrillville and a 20,000 sheet job in Michigan City.

[Hoverman]

No headers for me. Kevin has not sent me the dyno yet. I will post pictures when Nate gets done Painting on the stripes. They are going to be black with a touch of gold pearl in it, with a ghost image of Lingefelter in it. Doing the Pfadt sup on Wendsday. I'll post soon them soon, if I can figure out how!! WoW still on the edge of my seat!!

[2010 BADSS]

Originally Posted by Windy City

Hoo Rah Dog!
Some people have all the luck! (and the warm weather)

Looks GOOD PAUL! Can't wait to see your numbers.

I'm watching for a right fitting Z06, have some other planning in the works.

Also have an architect friend of mine gearing up to start a set of drawings for a new garage, with an attached house!

Wow, that sounds like what we need, LOL a new garage with and attached house.


Paul, I know this will be sooooo awesome!! I'm very happy for you. I hope the Colts win too, sorry Jets fans, my team is th 49ers, so that hasn't gone so great lately, but oh well, at least my car is coming home soon!!

[2010 BADSS]

Originally Posted by mws444

Hey 2010, any word on an ETA? I cant wait to hear all about your baby!

ETA is Fred is ready to go this weekend if she is. We are so close I can almost drive her in my dreams!!!
Me too, and believe me, when I drive her you guys will be the first ones to hear all about it!!! We've got 2 more storms coming (One came today, one tomorrow, should be gone by Saturday) Hopefully, just in time...

Hoverman, Your ride is going to be awesome. I just know you're going to luv it!!!!!!!!

What do you guys think of the new signature? I figured since I am the first sister in the "Brotherhood" so I figured I would try it out.

[Blue70SS]

Originally Posted by 2010 BADSS

ETA is Fred is ready to go this weekend if she is. We are so close I can almost drive her in my dreams!!!
Me too, and believe me, when I drive her you guys will be the first ones to hear all about it!!! We've got 2 more storms coming (One came today, one tomorrow, should be gone by Saturday) Hopefully, just in time...

Hoverman, Your ride is going to be awesome. I just know you're going to luv it!!!!!!!!

What do you guys think of the new signature? I figured since I am the first sister in the "Brotherhood" so I figured I would try it out.

Hello "LPE Brother and Sisters",

Here's a link to a real fun job! http://www.camaro5.com/forums/showth...87#post1397287 .... Pfadt rear diff poly bushings complete and ready for LPE power!

[mws444]

Originally Posted by Blue70SS

Hello "LPE Brother and Sisters",

Here's a link to a real fun job! http://www.camaro5.com/forums/showth...87#post1397287 .... Pfadt rear diff poly bushings complete and ready for LPE power!

Awsome post! pics with captions tell the whole story!
I would say it looks much harder than it is, good weekend project! Or if so inclined pay 6 or 7 hundred and hire a pro.

[RS-SS2]

Originally Posted by Blue70SS

Hello "LPE Brother and Sisters",

Here's a link to a real fun job! http://www.camaro5.com/forums/showth...87#post1397287 .... Pfadt rear diff poly bushings complete and ready for LPE power!

Nice write up Blue. Sure will be helpful if I decide to take on this job myself.

[RS-SS2]

Originally Posted by Windy City

Hoo Rah Dog!
Some people have all the luck! (and the warm weather)

Looks GOOD PAUL! Can't wait to see your numbers.

I'm watching for a right fitting Z06, have some other planning in the works.

Also have an architect friend of mine gearing up to start a set of drawings for a new garage, with an attached house!

New garage with an attached house. I like the way you think windy.

[Speed74SS]

Originally Posted by Hoverman

No headers for me. Kevin has not sent me the dyno yet. I will post pictures when Nate gets done Painting on the stripes. They are going to be black with a touch of gold pearl in it, with a ghost image of Lingefelter in it. Doing the Pfadt sup on Wendsday. I'll post soon them soon, if I can figure out how!! WoW still on the edge of my seat!!

Hoverman - looks like some good numbers and I can't wait to see the paint!! I will be watching for the pics, it should look sweet.

Paul - Finally the beast is running and looks great. I'll bet you can't wait to get it back.

BADSS - Yours should be home shortly and then the fight for supremacy in the garage or maybe a coupling? Nice numbers too!!

All your cars getting done is exciting and makes me want to get mine out and let those tires have it. A few months yet and it can't go fast enough!!

[Aaron Pfadt]

Originally Posted by Blue70SS

Hello "LPE Brother and Sisters",

Here's a link to a real fun job! http://www.camaro5.com/forums/showth...87#post1397287 .... Pfadt rear diff poly bushings complete and ready for LPE power!

Thanks for posting this writeup. It really captures the install well. This is a pretty involved job, not quite as simple as an engine mount install

I'll post some before and after video of a diff mount installation. We have been doing some under car filming There is a surprising amount of movement with the stock differential mounts.

-Aaron

[600hp-lpe]

Blue, nice writeup on the Rear end bushings.

I already hacked mine out and swapped them for Pedders bushings.
That procedure brings back memories! Glad you only have to do that once...

[600hp-lpe]

Fellow LPE folks.. Have any interest in a DDIN kit for the Camaro?

Fesler is taking pre-orders. $299.00 for the kit to be able to install your favorite DDIN radio/Nav unit in the Camaro.

Here is a link to the thread. It should retain all options and has a LCD above the radio for the heat/AC controls. Looks pretty cool!

http://www.camaro5.com/forums/showth...t=61319&page=1