Lingenfelter Performance Engineering Customers - Page 474 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JusticePete · 10-26-2011, 03:56 PM

Quote:

Originally Posted by mws444

Is that what you were running on the video a while back? If so that was sweet! You have to do the same thing for this run!

Yes and yes.

mws444 · 10-26-2011, 09:06 PM

Quote:

Originally Posted by JusticePete

Yes and yes.

You know I am starting to get excited about this little trip. Man I need some quality automotive relaxation!

mws444 · 10-26-2011, 09:30 PM

Hey Dan, Sorry but the best I could rent at the Bellagio was a Chevy Transverse.

So I guess no new speed record to the Challenge will be set by us.

600hp-lpe · 10-27-2011, 01:18 AM

Quote:

Originally Posted by mws444

Hey Dan, Sorry but the best I could rent at the Bellagio was a Chevy Transverse.

So I guess no new speed record to the Challenge will be set by us.

Oh well.. sometimes you just have to take what is available...

Mike,
I'll be around on the weekend.. I'll call tomorrow so we can figure out plans for the weekend.

Blue70SS · 10-27-2011, 06:09 AM

Quote:

Originally Posted by mws444

You know I am starting to get excited about this little trip. Man I need some quality automotive relaxation!

Hey, you guys have fun!

I was hoping to make SEMA this year, but kinda saw the writing on the wall..... Things have been crazy busy with Office/Warehouse purchase and relocating everything/remodel/security setup.

I'm scheduled for rebuilt RPM tranny install with the new CF driveshaft for the LPE rearend tomarrow in Wyoming. Hopefully will drive it back Friday night if the snow is cleared yet.

I'm replacing the whole clutch hydrolic system and adding the Tick Performance SS braided clutch line and full bleed system. Also installing new "Touring" Corsa exhaust with the ARH 2" LTs and 3" mids. It should give it a nice tone

- I was pretty loud already with DT shorty's and HF cats. LTs and no cats would have been too much for in town. ... Almost forgot - I found the Solo Hi flow cats starting to blow out. No cats will make room for a 2-step (next up).

JusticePete · 10-28-2011, 04:05 PM

Interesting.... http://www.semashow.com/press/2011/1...ace-suspension

mws444 · 10-28-2011, 09:16 PM

Quote:

Originally Posted by JusticePete

Interesting.... http://www.semashow.com/press/2011/1...ace-suspension

Interesting?.......More like AWESOME!!!!!

Wow, LPE, foriegn fighting vehicles, SEMA.....I am beginning to think Pete gets around.

JusticePete · 10-28-2011, 09:22 PM

Quote:

Originally Posted by mws444

Interesting?.......More like AWESOME!!!!!

Wow, LPE, foriegn fighting vehicles, SEMA.....I am beginning to think Pete gets around.

I may be easy, but I am never cheap.

*GTAHVIT* · 10-28-2011, 10:31 PM

That rocks...

600hp-lpe · 10-30-2011, 10:42 PM

I spent Saturday with Mws444 and got a tour of his Monster Garage... It is absolutely incredible!

Thanks for a great day Mike! I had a blast!

*GTAHVIT* · 10-31-2011, 10:22 AM

Quote:

Originally Posted by 600hp-lpe

I spent Saturday with Mws444 and got a tour of his Monster Garage... It is absolutely incredible!

Thanks for a great day Mike! I had a blast!

Dammit!!!! Dan I forgot to call you... How's things looking this week???

Blue70SS · 10-31-2011, 10:26 AM

Quote:

Originally Posted by JusticePete

Interesting.... http://www.semashow.com/press/2011/1...ace-suspension

I find it interesting that the rear diff bushing package used a Pedders HD bushing for the 2 front bushings and a delrin for the rear. When changing mine from Pfadt to Pedders purely to show off the LPE diff (which is extremely quite), I found my 2 front "street" version bushings in great shape - but the rear harder "strip" version had become loose and fell out - so obviously gets more abuse. BTW, also noticed on the Pedders that the metal cylinder that the bolt runs through is shorter than the overall length of the bushing. Is this for noise suppression to lessen metal to metal connections? Seems like it should lessen noise. And BTW, the Pedders bushings seemed to fit much tighter when pushing the diff into the cradle mounts. Nice product

*GTAHVIT* · 10-31-2011, 10:41 AM

Quote:

Originally Posted by GTAHVIT

Dammit!!!! Dan I forgot to call you... How's things looking this week???

Nevermind....

you're in vegas...

Have a good time.

paul2010 · 10-31-2011, 08:03 PM

I placed my order for a Summit White ZL1 order number PZDXRQ. Should go good with the black one.

10-26-2011, 09:30 PM	#6625
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	Hey Dan, Sorry but the best I could rent at the Bellagio was a Chevy Transverse. So I guess no new speed record to the Challenge will be set by us. __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

10-28-2011, 10:31 PM	#6631
GTAHVIT Blessed Drives: 2013 Sonic RS MT Join Date: Dec 2007 Location: Saint Augustine FL Posts: 28,441 View My Garage	That rocks... __________________ Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals."

10-31-2011, 08:03 PM	#6636
paul2010 Drives: 2012 ZL1 #1278 Join Date: Aug 2009 Location: Indiana Posts: 1,213 View My Garage	I placed my order for a Summit White ZL1 order number PZDXRQ. Should go good with the black one. __________________ 2012 ZL1 #1278 2010 2nd Place Fastest 4 5th Gen LSX Shootout 2011 2nd Place Fastest 4 5th Gen LSX Shootout

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lingenfelter 2010 Camaro Engine Packages Including New Vehicle Now Available	Tim@Lingenfelter	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	06-18-2010 08:11 AM
Lingenfelter 2010 Camaro Engine Packages - up to 800hp!	Sizzox	5th Gen Camaro SS LS LT General Discussions	108	04-14-2010 08:09 PM
My Lingenfelter Camaro Build	Speed74SS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	244	10-08-2009 11:00 PM
Lingenfelter Supercharged Camaro makes 600 RWHP!!	Kevin@Lingenfelter	Forced Induction - V8	218	06-24-2009 03:26 PM
Three 2010 Camaros Arrive at Lingenfelter Performance Engineering	Sizzox	5th Gen Camaro SS LS LT General Discussions	25	04-26-2009 02:15 PM

10-28-2011, 04:05 PM	#6628
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,171	Interesting.... http://www.semashow.com/press/2011/1...ace-suspension

10-30-2011, 10:42 PM	#6632
600hp-lpe Drives: 2010 Join Date: Jul 2009 Location: NH Posts: 4,788	I spent Saturday with Mws444 and got a tour of his Monster Garage... It is absolutely incredible! Thanks for a great day Mike! I had a blast!