New Ipad Holder for 2010/2011 Camaro's

[BackinBlackSS/RS]

Originally Posted by Lbness

OK spare me 149?
I used 2 Velcro Dot I trimmed and put on the radio knobs and rest it in front of the shifter
Bam Ipad Mount it looks good you can pop it forward to get to your ac controls and the radio is available. I have a case that I put the rough Velcro landing pads Easy on easy off

Originally Posted by bigwayne3000

Whys it crazy? You already spent $499 or more on the iPad itself, whats another $150 to have it mounted in your car? Much cheaper then taking it to a body shop and getting it installed in the dash.

It's crazy because look how this guy did it. Easy as pie and you don't get soaked for $149.

[bigwayne3000]

Originally Posted by SFCamaroSS

I have my IPAD on a pro clip (proclip.com) that clips into the middle vent just above the radio. I can still see/use my radio and it comes right out if I need it to. No holes to drill and I have had no trouble with the heater blowing on it (just close those vents). Works great to run a nav program and bluetooth music over the car radio.

Attachment 223372

Attachment 223373

Wow thanks for the pics. I like this a bit better then other ideas. Hows it hold up on bumps/turns/etc? Also does it way down the vent a lot to where it wont stay in place or is it pretty stable all around?

[liquidsmoke]

Originally Posted by bigwayne3000

Have you done anything to your car yet for this? If so some pics and a video would be helpful!

unfortunately i havnt had time yet. I know, sucks.

But in the mean time, i kind of retired my idea and decided the dual suction cup idea was better, just need to order some.

[SFCamaroSS]

Originally Posted by bigwayne3000

Wow thanks for the pics. I like this a bit better then other ideas. Hows it hold up on bumps/turns/etc? Also does it way down the vent a lot to where it wont stay in place or is it pretty stable all around?

It is VERY stable and does not seem to be effecting the vent in any way.

[AAD]

I just don't feel safe having the iPad wedged in the dash. I would much rather have the holder bolted to my dash. At least the Padholdr bolts to the dash and you can use a case with it.

[Jefe's SS]

Originally Posted by SFCamaroSS

I have my IPAD on a pro clip (proclip.com) that clips into the middle vent just above the radio. I can still see/use my radio and it comes right out if I need it to. No holes to drill and I have had no trouble with the heater blowing on it (just close those vents). Works great to run a nav program and bluetooth music over the car radio.

Attachment 223372

Attachment 223373

My iPad wouldn't pair w/ my SS. Did the software/os update for the iPad solve this?

[Padholdr]

Originally Posted by Camaro21

I found this cool Ipad Holder for the 2010/2011 Camaro's. I gotta get me one of these..

Here is where I found it !!

We have been getting quite a bit of traffic to our site from this forum, and we wanted to say thanks. If anyone has any questions let me know if I can help.

We offer a discount to forum members, just put the coupon code: socialfriends1 in at checkout and we will give 10% off your order.

Jim

[kenkartasasmita]

and kinda expensive just for a holder. $150?

[Padholdr]

Originally Posted by kenkartasasmita

and kinda expensive just for a holder. $150?

We have kits starting at $69.99 and then with the coupon code, not bad at all.

[kenkartasasmita]

url?

[Kevinshawnm]

Originally Posted by Dangeruss

Cool...too bad it's not available until July.

Lol of 2010!!! and it doesnt even look like the listing....