![]() |
|
|
#43 | |
![]() Drives: ‘21 ZL1 1LE 6MT Join Date: Jul 2012
Location: Floribama
Posts: 622
|
Quote:
You are right about the torque being in the horsepower equation but you are forgetting other variables that is in the equation. Most importantly is time. The HP and TQ curve will be earlier in the curve so you get more power and torque sooner. You will get to where you want to be in less time. Do some calculations with (torque x time) / 5252 and see for yourself. Time = rpm. Also, The dyno will actually "see" more torque at the rollers with a lower gear (3.91 vs. 3.31), but it takes the measured torque at the wheels and divides it by the difference between engine RPM and roller RPM. This takes the gear multiplication out of the equation.
__________________
ZL1 1LE Black - 6MT - PDR - Nav - Michelin PS4s
|
|
|
|
|
|
|
#44 |
|
Russ
|
I posted a while back on a thread about HP. I had my car tuned and it was putting down 386RWHP before the tune. After the tune it was putting down 407.5RWHP. I was extremely happy with the gain and could feel the difference big time when I drove it.
I got so many questions because no one believed me. Even after I posted the results I still got responese that it wasn't real. The guy that did the tune is very well known and has been in several car magazines for his ability to tune a car. I just thought WTF, I don't care if you don't believe it or not. It's my car and I'm happy with it. No need to tell me again you don't believe me because I don't care if you do or not. Russ |
|
|
|
|
|
#45 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2021 1LE Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,315
|
Congratz Russ. Problem with forums sometimes is people personalize the info. What I posted is real and legit and honest. Now how accurate the results are.... well
Strange almost none of the site geniuses have made a case for the possibility or impossibility of this being accurate. Can a stock SS with a 1LE setup make 400 to the ground? |
|
|
|
|
|
#46 |
![]() Drives: ‘21 ZL1 1LE 6MT Join Date: Jul 2012
Location: Floribama
Posts: 622
|
Is it possible the dyno is off by 10%? yes. Does the gear ratio matter? No. Does the esteering help? a little. Does the exhaust a help? a little. Does anyone on the forum have a crystal ball? no. Are you gong to get a solid answer? no. Are you going to keep asking until someone says it is correct? probably
__________________
ZL1 1LE Black - 6MT - PDR - Nav - Michelin PS4s
|
|
|
|
|
|
#47 |
|
Account Suspended
Drives: nothing Join Date: Nov 2010
Location: a hole
Posts: 17,904
|
So the rims add 40 hp?
|
|
|
|
|
|
#48 |
|
Yeah buddy
Drives: 2010 Camaro SS Inferno Orange Join Date: Sep 2012
Location: Raleigh
Posts: 196
|
Agree...that's the only way to find out
Dyno numbers are sometimes just numbers and every dyno is different.
__________________
2010 SS IOM L99,Heritage grille,Rear Bowtie Delete |
|
|
|
|
|
#49 |
|
Do you even lift, bro?
|
im running the TVS2300
__________________
My 1LE (645WHP/597WTQ) build/journal Thread:
1st ever 1LE COTW http://www.camaro5.com/forums/showthread.php?t=255461 |
|
|
|
|
|
#50 |
![]() ![]() ![]() Drives: "Bee" ZL585, Dark Blue Suburban. Join Date: Nov 2010
Location: Luxemburg
Posts: 1,244
|
Maybe someone accidently put an LS7 in your car? :-)
|
|
|
|
|
|
#51 |
|
Do you even lift, bro?
|
__________________
My 1LE (645WHP/597WTQ) build/journal Thread:
1st ever 1LE COTW http://www.camaro5.com/forums/showthread.php?t=255461 |
|
|
|
|
|
#52 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2012 ZL1 - #670 Join Date: Jun 2009
Location: Seminole, Fl.
Posts: 8,009
|
Maybe the correction is off ...
__________________
|
|
|
|
|
|
#53 |
![]() ![]() Drives: 2012 Camaro 1SS/RS L99 Join Date: Sep 2012
Location: Wilmington. NC
Posts: 794
|
So the 1LE has the same ls3 as everyone else making 426hp at the crank. You put down 402? That would mean your drive train only had 5.6% loss. Sorry but something is off here the gears are probably close to that inefficient not to mention the shaft, transmission, and well everything else between the crank and the rear wheel, I mean think about it logically something doesn't add up
__________________
(this was a joke, this was only a joke, If this had been an actual comment, the comment you just read would have been followed by
![]() ![]() or nothing at all) |
|
|
|
|
|
#54 |
![]() ![]() |
|
|
|
|
|
|
#55 |
![]() ![]() ![]() Drives: . Join Date: Nov 2012
Location: .
Posts: 1,085
|
|
|
|
|
|
|
#56 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2021 1LE Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,315
|
Quote:
You post as though you have intimate knowledge on this subject. What is the most a stock LS3 could generate? And would it have to be raced to be believed?
|
|
|
|
|
|
|
|
|
![]() |
|
|