V8 bolt on help desk! Now available!! - Page 665 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Tampa Tuning · 05-24-2014, 04:19 PM

Yes if measured and cut correctly, but for $150 bucks you can get an X- pipe from Jegs.

Quote:

Originally Posted by Bobs of FL

Wasn't sure how to word this, so if it's been brought up before, I apologize for the repeat question.

I just purchased Kooks LT 1 7/8 headers with High Flow Cats and have a Flowmaster axle-back exhaust on. Now my question is, will the stock midpipe be sufficient to connect these two aftermarket products?

axis · 05-24-2014, 08:22 PM

Quote:

Originally Posted by Bobs of FL

Wasn't sure how to word this, so if it's been brought up before, I apologize for the repeat question.

I just purchased Kooks LT 1 7/8 headers with High Flow Cats and have a Flowmaster axle-back exhaust on. Now my question is, will the stock midpipe be sufficient to connect these two aftermarket products?

The high flow cats are made to hook up to the OEM connections so you should be good to go.

Bobs of FL · 05-25-2014, 12:24 AM

Quote:

Originally Posted by Tampa Tuning

Yes if measured and cut correctly, but for $150 bucks you can get an X- pipe from Jegs.

Quote:

Originally Posted by axis

The high flow cats are made to hook up to the OEM connections so you should be good to go.

Thanks for the reply guys. It's looking like I'll need to trim some off the midpipe then? The DIY on youtube didn't show any cutting but I wouldn't be surprised if it was required.

axis · 05-25-2014, 03:00 PM

Quote:

Originally Posted by Bobs of FL

Thanks for the reply guys. It's looking like I'll need to trim some off the midpipe then? The DIY on youtube didn't show any cutting but I wouldn't be surprised if it was required.

Shouldn't be any at all. The OEM mid pipes should just slip right on to the TSP cats, unless they have some special connection. I thought all the TSP stuff bolts right up to the OEM connections. Can you post a listing for the high flow cats?

Bobs of FL · 05-26-2014, 12:59 AM

Quote:

Originally Posted by axis

Shouldn't be any at all. The OEM mid pipes should just slip right on to the TSP cats, unless they have some special connection. I thought all the TSP stuff bolts right up to the OEM connections. Can you post a listing for the high flow cats?

http://marylandspeed.com/kooks-1-78x...mc-p-5191.html

After reading the description a few times, it makes sense. "these mid-pipes connect to any STOCK or aftermarket 2.5" cat-back"

axis · 05-26-2014, 11:50 PM

Quote:

Originally Posted by Bobs of FL

http://marylandspeed.com/kooks-1-78x...mc-p-5191.html

After reading the description a few times, it makes sense. "these mid-pipes connect to any STOCK or aftermarket 2.5" cat-back"

Sorry, for some reason I was thinking TSP and not Kooks. Yes kooks will most definitely hook to your stock catback. I'm running that exact setup but in the 1.75in headers.

TBone · 05-28-2014, 01:05 AM

Squeeeeek.

T.

BlaqWhole · 05-28-2014, 02:54 AM

Any advice on an aftermarket flywheel and clutch?

thahemp · 05-28-2014, 09:15 AM

Quote:

Originally Posted by BlaqWhole

Any advice on an aftermarket flywheel and clutch?

Mantic ER2 for less than 700rwhp, Mantic 9000 or Mcleod RXT for 700+.

thahemp · 05-28-2014, 09:16 AM

Quote:

Originally Posted by TBone

Squeeeeek.

T.

The squeeeeeeek has been overpowered by the cam. It met its match.

TBone · 05-28-2014, 08:21 PM

Damn, I missed that. Oh well, for old time sake anyway.

T.

GO HAWKS!!!!!!

CHMSC · 05-28-2014, 10:18 PM

Quote:

Originally Posted by TBone

Damn, I missed that. Oh well, for old time sake anyway.

T.

GO HAWKS!!!!!!

Bobs of FL · 05-29-2014, 01:09 AM

Is the windshield wiper fluid tank relocation kit worth the money?

axis · 05-29-2014, 01:24 AM

Quote:

Originally Posted by Bobs of FL

Is the windshield wiper fluid tank relocation kit worth the money?

Depends on why you want it. If you have a scoop, you have to relocate it. There is a little more air to be had by it not being there, if you have a aftermarket CAI in that location.

05-28-2014, 01:05 AM	#9303
TBone Negative Camber Junkie Drives: 2010 1SS LS3/6MN ABM 1 of 23 Join Date: May 2009 Location: ChiTown, IL Posts: 1,824	Squeeeeek. T. __________________ "Horsepower is something that looks great in a Magazine article, but suspension is what actually gets you around the track fast.." Jack Olsen The drag strip is like sniffing glue, it's cheap, it's a decent buzz, it doesn't last long and they are all the same. Road racing is like China White Heroin, the buzz is stronger, the high lasts for hours, it's extremely addictive and they are all different. I can't wait for my next Track fix. DA HAWKS OWN DA CUP!!!!!

05-28-2014, 08:21 PM	#9307
TBone Negative Camber Junkie Drives: 2010 1SS LS3/6MN ABM 1 of 23 Join Date: May 2009 Location: ChiTown, IL Posts: 1,824	Damn, I missed that. Oh well, for old time sake anyway. T. GO HAWKS!!!!!! __________________ "Horsepower is something that looks great in a Magazine article, but suspension is what actually gets you around the track fast.." Jack Olsen The drag strip is like sniffing glue, it's cheap, it's a decent buzz, it doesn't last long and they are all the same. Road racing is like China White Heroin, the buzz is stronger, the high lasts for hours, it's extremely addictive and they are all different. I can't wait for my next Track fix. DA HAWKS OWN DA CUP!!!!!

05-28-2014, 02:54 AM	#9304
BlaqWhole Account Suspended Drives: 2017 Camaro ZL1 A10 Join Date: May 2012 Location: NJ Posts: 7,692	Any advice on an aftermarket flywheel and clutch?

05-29-2014, 01:09 AM	#9309
Bobs of FL Drives: 2010 2SS Black/IOM Join Date: Sep 2013 Location: Jacksonville, FL Posts: 108	Is the windshield wiper fluid tank relocation kit worth the money?