Sold - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Jewbeanie · 01-12-2015, 10:34 AM

Installed my MGW short throw no longer have a need for this Barton short throw. 100$ shipped.

Jewbeanie · 01-15-2015, 10:31 PM

The_Stache · 01-16-2015, 08:38 PM

Would probably get an instant offer if you mention its a barton in the title.

Love mine.

Go luck with sale!

revived · 01-17-2015, 05:30 AM

hows the throw and all around feel compared to MGW?

I hear barton is shortest throw there is but some feel better.

Jewbeanie · 01-17-2015, 11:46 AM

Honestly I hope my MGW smooths out after break in. Right now it is even shorter throw with a lot of muscle needed to move it into 1st and 6th but its like butter on 3rd and 4th. Its a bit too short for my liking but I will get used to it.

Jewbeanie · 01-22-2015, 08:12 PM

$100 shipped.

Jewbeanie · 01-26-2015, 10:10 PM

bump

TwentyTen2SSRS · 01-29-2015, 12:33 AM

Install instructions somewhere?

Jewbeanie · 01-29-2015, 01:14 AM

http://www.camaro5.com/forums/showthread.php?t=53823

This is what I used originally to install it.

and a video to walk you through

TwentyTen2SSRS · 01-29-2015, 01:42 AM

Are those the same pieces from the video? Seems easy enough! Is it just cosmetic then? Not actually shorter shifts?

Jewbeanie · 01-29-2015, 05:27 AM

Negative its just how to install the top half the part under the drivetrain requires you to go underneath the car lower the transmission assembly by unbolting the brace moving back the heat shield then removing the clips and pin that hold the assembly removing the old shifter and reattaching the new one in reverse order.

reduced to $90 shipped.

TwentyTen2SSRS · 01-29-2015, 12:28 PM

Oh wow - still tempted maybe someone will know and jump right on this!

What would a shop charge for this I wonder? Doesn't seem like more than an hour or so. Maybe Barton has full instructions

TwentyTen2SSRS · 01-29-2015, 12:38 PM

I'm interested.. Are those al the parts needed for install?

I see these on the thread you posted

Name: ImageUploadedByTapatalk1422553135.650660.jpg
Views: 185
Size: 83.8 KB

Name: ImageUploadedByTapatalk1422553135.650660.jpg
Views: 185
Size: 83.8 KB

Jewbeanie · 01-29-2015, 06:27 PM

Yes to change this to a Barton Short throw this is all the parts you need. The clips and pin will be reused from your previous shifter same with both shifter boots (the rubber noise reduction one and the leather looks one).

01-12-2015, 10:34 AM	#1
Jewbeanie Drives: 2010 White Camaro 2SS/RS Join Date: Jul 2014 Location: Timbucktu Posts: 222	Sold Installed my MGW short throw no longer have a need for this Barton short throw. 100$ shipped. Attached Images Last edited by Jewbeanie; 01-31-2015 at 02:31 AM. Reason: Sold

01-16-2015, 08:38 PM	#3
The_Stache SoCal Race Team #13 Drives: 2010 1SS:RS:LS3:SW Join Date: Mar 2007 Location: Gilbert, AZ Posts: 1,800 View My Garage	Would probably get an instant offer if you mention its a barton in the title. Love mine. Go luck with sale! __________________ A.K.A - Diarmadhi (old handle) - So much to do.. So little money Owner : Fast-Stache Industries LLC

01-17-2015, 05:30 AM	#4
revived Vrrrm. Drives: 2011 2SS/RS LS3 Join Date: Jun 2013 Location: MA Posts: 1,495	hows the throw and all around feel compared to MGW? I hear barton is shortest throw there is but some feel better. __________________

01-29-2015, 12:33 AM	#8
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,972 View My Garage	Install instructions somewhere? __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

01-29-2015, 01:42 AM	#10
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,972 View My Garage	Are those the same pieces from the video? Seems easy enough! Is it just cosmetic then? Not actually shorter shifts? __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

01-15-2015, 10:31 PM	#2
Jewbeanie Drives: 2010 White Camaro 2SS/RS Join Date: Jul 2014 Location: Timbucktu Posts: 222

01-17-2015, 11:46 AM	#5
Jewbeanie Drives: 2010 White Camaro 2SS/RS Join Date: Jul 2014 Location: Timbucktu Posts: 222	Honestly I hope my MGW smooths out after break in. Right now it is even shorter throw with a lot of muscle needed to move it into 1st and 6th but its like butter on 3rd and 4th. Its a bit too short for my liking but I will get used to it.

01-22-2015, 08:12 PM	#6
Jewbeanie Drives: 2010 White Camaro 2SS/RS Join Date: Jul 2014 Location: Timbucktu Posts: 222	$100 shipped.

01-26-2015, 10:10 PM	#7
Jewbeanie Drives: 2010 White Camaro 2SS/RS Join Date: Jul 2014 Location: Timbucktu Posts: 222	bump

01-29-2015, 05:27 AM	#11
Jewbeanie Drives: 2010 White Camaro 2SS/RS Join Date: Jul 2014 Location: Timbucktu Posts: 222	Negative its just how to install the top half the part under the drivetrain requires you to go underneath the car lower the transmission assembly by unbolting the brace moving back the heat shield then removing the clips and pin that hold the assembly removing the old shifter and reattaching the new one in reverse order. reduced to $90 shipped.

01-29-2015, 12:28 PM	#12
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,972 View My Garage	Oh wow - still tempted maybe someone will know and jump right on this! What would a shop charge for this I wonder? Doesn't seem like more than an hour or so. Maybe Barton has full instructions __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

01-29-2015, 12:38 PM	#13
TwentyTen2SSRS Drives: 2010 2SS/RS Join Date: Apr 2013 Location: Seattle, WA Posts: 3,972 View My Garage	I'm interested.. Are those al the parts needed for install? I see these on the thread you posted __________________ Cold Air Inductions CAI • Stainless Power LT's with HFC's • Flowmaster American Thunder Cat Back • APEX Scoop and WW Relocation Kit • VMAX Ported Throttle Body • Custom Dyno Tune • Pfadt 1.25" Lowering Springs • ZL1 Rims on 275 front 315 Rear • custome underlay vinyl wrap • Anvil Spoiler • heritage grill • APR Front Splitter • Custom Emblempros emblems • ZL1 Side Skirts • 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)

01-29-2015, 06:27 PM	#14
Jewbeanie Drives: 2010 White Camaro 2SS/RS Join Date: Jul 2014 Location: Timbucktu Posts: 222	Yes to change this to a Barton Short throw this is all the parts you need. The clips and pin will be reused from your previous shifter same with both shifter boots (the rubber noise reduction one and the leather looks one).