Help with brake duct routing - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Merc · 10-07-2014, 07:33 PM

Z28 front brake ducting will be availble soon from GM Performance, according to Al they will fit the SS and the hole is already marked out on the inner fender from 2012 on. I'm waiting for those to come available.

X25 · 10-07-2014, 07:38 PM

Quote:

Originally Posted by Merc

Z28 front brake ducting will be availble soon from GM Performance, according to Al they will fit the SS and the hole is already marked out on the inner fender from 2012 on. I'm waiting for those to come available.

Does that ducting end right by the fender, where the hole is, just like what was the case for C6 Corvette Z06? If so, it would not be sufficient.

toehead93 · 10-08-2014, 02:08 PM

very helpful. I have everything to do this but can't find time.

rockrau · 10-08-2014, 06:29 PM

Me Too!

STONE SS · 06-30-2015, 04:21 PM

Quote:

Originally Posted by Synner

Did mine under the the ends of the radiator on the inside of the frame rail. Its very close to the accessory drives so you zip tie them back. Then the outlet will never contact tire and stays out of the suspension completely.
Only pic I have but you can see its nowhere near the suspension.

Did you have issues getting by the power steering lines on yours? Mine were replaced before I did the brake ducts due to a leak and I couldn't figure out a way to get by them. I am thinking the line they used is different than it was from the factory.

Synner · 07-01-2015, 05:38 AM

No issues. It was definitely tight and took some effort past the bottom of the flexalite radiator but nothing some force didn't take care of.

10-07-2014, 07:33 PM	#15
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,310	Z28 front brake ducting will be availble soon from GM Performance, according to Al they will fit the SS and the hole is already marked out on the inner fender from 2012 on. I'm waiting for those to come available. __________________ My Build Thread

10-08-2014, 02:08 PM	#17
toehead93 Drives: 2014 2SS/1LE Join Date: Feb 2007 Location: wpb fl Posts: 3,135 View My Garage	very helpful. I have everything to do this but can't find time. __________________ Used Racing Brake 2 Peice Rotors for sale: http://www.camaro5.com/forums/showthread.php?t=344754 Summit White 2014 2SS 1LE Recaros, NPP exhaust, Nav 2010 2SS A6 - sold.

10-08-2014, 06:29 PM	#18
rockrau Drives: 2010 2ss red LS3 Join Date: Aug 2011 Location: perkasie pa Posts: 541	Me Too! __________________ Pedders Pace Car Kit with ZL1 sway bar conversion & camber bolt kit.Lowered 1.5". 1LE tires & wheels. CAI air intake. Anvil CF rear spoiler.MGW shifter. 1 7/8" Kooks LT headers & HF cats.V-Max ported TB. Tuned.

07-01-2015, 05:38 AM	#20
Synner Drives: cars Join Date: May 2011 Location: Oversneeze Posts: 4,542	No issues. It was definitely tight and took some effort past the bottom of the flexalite radiator but nothing some force didn't take care of.