![]() |
|
|
#15 |
|
Account Suspended
Drives: SuperCharged 2SS/RS IOM MN6 Join Date: May 2009
Location: CA
Posts: 5,094
|
Pm me tomorrow and I'll send you a list of TSBs that one of which potentially adresseses your issue.
|
|
|
|
|
|
#16 |
![]() ![]() ![]() ![]() Drives: 1SSRS RY L99 Join Date: Aug 2009
Location: Ontario
Posts: 1,323
|
Does sound like wind noise. Try to change your heater from panel to defrost mode or whatever. See if it changes. I am a heavy truck tech and have chased down my share of rattle noise complaints. You would be amazed how sound travels. The area where you hear the sound coming from may be caused by a part vibrating nowhere near it, but somehow the vibration get transmitted and produces a sound. There may be some plastic fender moulding in the wheel well that is shaking, but some reason it ends up sounding like it is behind the dash somewhere.
|
|
|
|
|
|
#17 |
![]() Drives: 2010 Camaro 2SS RJT A6 Join Date: Nov 2009
Location: S.W. Florida
Posts: 3
|
I have the same issue with mine. I don't hear a thing until the speedo says 80. Then something in or behind the dash makes a steady rattle/vibrating sound. Only way I can get rid of it is to slow up or turn up the radio.
|
|
|
|
|
|
#18 | |
|
Account Suspended
Drives: SuperCharged 2SS/RS IOM MN6 Join Date: May 2009
Location: CA
Posts: 5,094
|
Quote:
Try this, on the passenger side, between the back edge of the hood and the bottom of the windshield, tap your fingertips on the black plastic cover at the bottom of the windshield, no it is not the windshield molding, it is the black cover where dry leaves always end up. If tapping on it creates a rattle, you might have found the source. It is fastened down by 2 plastic body fasteners which you can remove/reinstall easily. On mine, it makes a rattle when I tap my fingers on it. The covers spans the width of windshield, but it feels solid in the middle and the driver's side. I am guessing that engine vibration or the wind at 80+mph is making that cover piece rattle. When I get around to it, I'll apply tape underneat it to hold it down better. |
|
|
|
|
|
|
#19 |
![]() Drives: 2010 Camaro 2SS RJT A6 Join Date: Nov 2009
Location: S.W. Florida
Posts: 3
|
The plastic cover on mine seems pretty secure all the way across it. Only thing I did notice is at the very ends of it there are 2 tabs that bend up over the windshield. The driver side one sits on the glass but the passenger side has a bit of play in it, maybe 1/4 inch. If you press on it, it will tap against the glass. Not sure if it's the culprit or not but i'll try taping it down later to see if it makes any difference.
|
|
|
|
|
|
#20 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 Camaro 2SS/RS Join Date: Mar 2008
Location: S.W. Florida
Posts: 6,294
|
Very interesting thread. I also noticed a rattle type noise while cruising on the highway doing 80+mph coming back from Tampa. As soon as I dropped my speed down under 80mph or so, the noise would go away.
So keep us posted. |
|
|
|
|
|
#21 |
![]() Drives: 2011 Mustang GT Join Date: Dec 2009
Location: Burleson, Texas
Posts: 72
|
Anyone figure the high speed dash rattle out yet? Had my car about 3 weeks now and have the exact same noise above 70 mph. I noticed the bracket that holds the windshield washer nozzles is not very firmly attached so I put some little round velcro pieces on it yesterday to hold it in place better but I haven't had a chance to take it out and see if that fixed it. I don't really know if that much wind could get under there anyway, but it's a thought.
|
|
|
|
|
|
#22 | |
|
Member
Drives: 2010 ABM 2SS/RS LS3 Join Date: Feb 2009
Location: Where you vacation...Tahoe
Posts: 928
|
Quote:
I only hear it when its hot out but I'm not happy since only Fords have rattled in my past....![]() ________ Raymond sommer Last edited by superstockcam; 04-19-2011 at 04:27 AM. |
|
|
|
|
|
|
#23 |
![]() Drives: 2010 Camaro 2SS Inferno Orange Join Date: Jun 2009
Location: California
Posts: 31
|
i aso noticed the windshield fluid bracket was a little loose. I taped it up and the rattle was still audible. I have yet to figure out where the noise is coming from.
|
|
|
|
|
|
#24 |
![]() Drives: 2016 1SS Black Join Date: Jul 2010
Location: Fort Lauderdale
Posts: 64
|
anyone figure this out? I just got my car a week ago and i notice a slight rattle from the passenger front window corner i think.. only happens at 68+ mph
|
|
|
|
|
|
#25 |
![]() Drives: 2010 Camaro 2SS Inferno Orange Join Date: Jun 2009
Location: California
Posts: 31
|
I still have not figured out where the noise is coming from. Everytime I think I find something that may explain it, the noise returns.
|
|
|
|
|
|
#26 |
![]() Drives: 2010 Camaro 2SS Inferno Orange Join Date: Jun 2009
Location: California
Posts: 31
|
you may want to check out this thread. Some of the suggestions may solve your problem. Unfortunately they did not solve mine.
http://www.camaro5.com/forums/showthread.php?t=97289 |
|
|
|
|
|
#27 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
I got an idea, anybody check the Pollen filter? It is on the outside of the car by the front dash. It could be flopping around or something could of gotten in there. It is on the passenger side.
|
|
|
|
|
|
#28 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 Camaro 2LT/RS ABM Join Date: Sep 2009
Location: Sugar Land, TX
Posts: 13,075
|
I have the same issue and it seems to be coming from the driver side corner near the windshield it happens at random times like going over bumps or high speeds like everyone else said. It's driving me crazy!!! I think my windsheild isn't glued on tight...when I push against it, it stops and then returns after a while once I let go...
__________________
2LT, RS, AT6 ABM, Gray Leather
Quote:
1100 Order accepted at dealer: 9/15/2009 - NPGV41. 2000 Order accepted by GM: 9/29/2009 3000 Accepted By Production Control: 9/30/2009 - TPW 10/26/09 3100 Sequenced:10/12/09 3300 Scheduled For Production:10/13/09 3400 Broadcast:10/22/09 3800 Produced:10/27/09 4000 Available To Ship:10/28/09 4200 Shipped:10/29/09 5000 Delivered To The Dealer:11/09/09 6000 Delivered To Customer:11/12/09 |
|
|
|
|
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Blue lighting on the dash gauges? | bluecamaroguy | 5th Gen Camaro SS LS LT General Discussions | 18 | 07-23-2011 03:31 PM |
| Factory dash ABL? | bkwagonss | 5th Gen Camaro SS LS LT General Discussions | 3 | 09-17-2009 11:41 AM |
| Anyone taken car to dealer for the under dash rattle? | ffrcobra_65 | USA - California | 6 | 09-11-2009 12:19 AM |
| '69 Door & Dash Emblems Mod | tjd24 | Cosmetics and Lighting Modification Discussions | 15 | 08-24-2009 10:46 PM |
| RS Dash Emblem (UPDATED!!!) | GOLDDOG | Cosmetics and Lighting Modification Discussions | 19 | 08-01-2009 06:26 PM |