Rear Footwells. DIY - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SSTG · 12-03-2011, 06:57 PM

I installed LED Footwells a couple weeks ago and love them. So I wanted to put something in for the rear but I didn't want them to be as bright as the front.
So my answer was Red 5mm Leds from Oznium.

First start off by removing (4) screws from the rear counsel and pop off the back section.

Then use a 1/4'' Drill bit to make a hole on both sides for the Leds to be placed in.

I already had power from my front footwells to take from so I just tied both Leds and piggybacked them with a lead wire to join my existing wires.

Reinstall and you should end up with something like this.

It was hard to get a good pic today in the garage but these are just enough to add something in the back with out over doing it. But you could get more powerful Leds if you so wished.

And a pic of the front footwells.

Pain505 · 12-03-2011, 07:20 PM

Nice Pics man! Love the front foot wells!

csjcsj · 12-03-2011, 07:23 PM

Good idea! Thanks for sharing!

LED Crazy · 12-03-2011, 11:11 PM

Excellent idea. That would have saved me a pretty penny or two.

2SSRS@Gen5diy · 12-04-2011, 06:52 AM

Nice work, I like DIY's.

SSTG · 12-04-2011, 11:26 AM

Quote:

Originally Posted by 2SSRS

Nice work, I like DIY's.

Coming from the KING of DIY.

12-03-2011, 06:57 PM	#1
SSTG Drives: 2014 Z51 Corvette Join Date: Apr 2011 Location: Ofallon, Mo. Posts: 5,822	Rear Footwells. DIY I installed LED Footwells a couple weeks ago and love them. So I wanted to put something in for the rear but I didn't want them to be as bright as the front. So my answer was Red 5mm Leds from Oznium. First start off by removing (4) screws from the rear counsel and pop off the back section. Then use a 1/4'' Drill bit to make a hole on both sides for the Leds to be placed in. I already had power from my front footwells to take from so I just tied both Leds and piggybacked them with a lead wire to join my existing wires. Reinstall and you should end up with something like this. It was hard to get a good pic today in the garage but these are just enough to add something in the back with out over doing it. But you could get more powerful Leds if you so wished. And a pic of the front footwells.

12-03-2011, 07:20 PM	#2
Pain505 Drives: 2012 Chevy Camaro 1LS Join Date: Oct 2011 Location: Albuquerque Posts: 432	Nice Pics man! Love the front foot wells! __________________ You Want To Leave The Fate Of The World In The Kids Camaro?? If You Can Do Better Than 180km They Cant Catch You, So They Dont Even Try...

12-03-2011, 07:23 PM	#3
csjcsj Drives: 2010 Camaro SS/RS 6spd Join Date: Sep 2009 Location: Jefferson, Ga Posts: 4,399 View My Garage	Good idea! Thanks for sharing! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5th Gen Suspension -- The Book	JusticePete	Suspension / Brakes / Chassis	151	05-07-2015 05:52 PM
Any DIY for switching rear ends?	caverman	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	13	02-25-2011 12:41 PM
Rear Side Marker DIY?	Medieval Peanut	Cosmetics and Lighting Modification Discussions	6	08-29-2010 12:23 PM
Im sure this has been asked before.. But forgive my innocence :)	gmag21	Suspension / Brakes / Chassis	23	02-21-2010 10:29 PM
Steering response....	CGM2SSRS	Wheels and Tires Talk Sponsored by The Tire Rack	130	10-21-2009 05:04 PM

12-03-2011, 11:11 PM	#4
LED Crazy okcamaros.com Drives: 2016 SS Join Date: May 2009 Location: Tulsa, Ok Posts: 1,754 View My Garage	Excellent idea. That would have saved me a pretty penny or two.

12-04-2011, 06:52 AM	#5
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	Nice work, I like DIY's.