New dash trim & door inserts... - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

PWND · 05-19-2010, 06:48 PM

ordered my dash/door trim kit back on Feb 18th... got it in last week... finally got around to installing it...

it makes a whole bunch of difference... really wish it had come this way...

dash trim was super easy to install... only took a few minutes...

the door panels were a little bit of a booger to get out... and removing all those damn melted plastic rods that were holding the insert in was a pain... but all in all.. it wasnt too hard... just a bit time consuming...

I do wish they used screws to secure the inserts to begin with... being that they send screws to secure the new inserts... would have made it way easier to swap out... but oh well...

they are from my phone so they are not the best... but here are some pics...

Name: 2010-05-15 12.44.11 (Medium).jpg
Views: 1533
Size: 136.2 KB

Name: 2010-05-15 12.44.11 (Medium).jpg
Views: 1533
Size: 136.2 KB

Name: 2010-05-15 13.05.13 (Medium).jpg
Views: 1537
Size: 108.2 KB

Name: 2010-05-15 13.06.23 (Medium).jpg
Views: 1524
Size: 148.9 KB

Name: 2010-05-15 13.07.50 (Medium).jpg
Views: 1502
Size: 96.7 KB

Name: 2010-05-15 13.20.18 (Medium).jpg
Views: 1507
Size: 111.9 KB

Name: 2010-05-15 13.35.10 (Medium).jpg
Views: 1411
Size: 144.0 KB

Name: 2010-05-15 13.35.35 (Medium).jpg
Views: 1370
Size: 101.5 KB

Name: 2010-05-15 13.47.57 (Medium).jpg
Views: 1386
Size: 95.8 KB

Name: 2010-05-15 13.48.24 (Medium).jpg
Views: 1408
Size: 104.3 KB

Name: 2010-05-18 22.57.29 (Medium).jpg
Views: 1386
Size: 145.4 KB

Name: 2010-05-18 22.59.10 (Medium).jpg
Views: 1381
Size: 151.7 KB

Name: 2010-05-19 00.17.58 (Medium).jpg
Views: 1347
Size: 145.4 KB

Name: 2010-05-19 01.05.28 (Medium).jpg
Views: 1359
Size: 156.5 KB

Name: 2010-05-19 01.06.04 (Medium).jpg
Views: 1286
Size: 135.1 KB

Name: 2010-05-19 01.37.52 (Medium).jpg
Views: 1330
Size: 103.2 KB

Name: 2010-05-19 11.48.46 (Medium).jpg
Views: 1358
Size: 109.6 KB

Name: 2010-05-19 11.49.00 (Medium).jpg
Views: 1259
Size: 101.4 KB

2010 SSRS · 05-19-2010, 06:51 PM

looks awesome

adub4185 · 05-19-2010, 07:24 PM

that does look really good. Great job!

gary bee · 05-19-2010, 07:27 PM

did the new trims come with the lights

SATXLS3 · 05-19-2010, 08:00 PM

Looks nice! U 1 brave dude to tear into them doors!

Atti2de · 05-19-2010, 08:03 PM

THATS HOT! looks good

PWND · 05-19-2010, 08:09 PM

Quote:

Originally Posted by 2010 SSRS

looks awesome

Quote:

Originally Posted by adub4185

that does look really good. Great job!

Quote:

Originally Posted by SATXLS3

Looks nice! U 1 brave dude to tear into them doors!

Quote:

Originally Posted by Atti2de

THATS HOT! looks good

Thanks...

Quote:

Originally Posted by gary bee

did the new trims come with the lights

the trim does not come with any lights. you just unscrew the light brackets from the factory insert and re-mount the brackets onto the new inserts. there are places for the mounting clips to attach to... the panel inserts are almost, if not totally, identical to the factory inserts... just unmount light from one and re-mount onto other...

camaro5grey · 05-19-2010, 08:10 PM

nicely done!!! how much was that kit? and do they have them all colors or certain? im thinkin black?

Green Monster · 05-19-2010, 08:15 PM

Mine came with the inserts...does look better in color!

alexw · 05-19-2010, 08:22 PM

In your opinion, is the yellow on the inserts the same color as the Rally Yellow exterior?

Can't tell from your pics.

I ask because it's called "Scorch Yellow", which is weird to me, if they are in fact the same.

PWND · 05-19-2010, 08:23 PM

Quote:

Originally Posted by camaro5grey

nicely done!!! how much was that kit? and do they have them all colors or certain? im thinkin black?

got my kit from GMpartsdirect... i think... they have been on backorder for several months... there is a thread somewhere in the "interior" parts section that has some more info on them...

there is also a few threads I found where people took off their factory inserts, stripped them down, had them repainted, then re-installed them... If I find any of those threads I will post them here...

PWND · 05-19-2010, 08:35 PM

Quote:

Originally Posted by alexw

In your opinion, is the yellow on the inserts the same color as the Rally Yellow exterior?

Can't tell from your pics.

I ask because it's called "Scorch Yellow", which is weird to me, if they are in fact the same.

As far as my terminator eyes can see... they look the same... it all looks like it came from the factory... if it doesnt match, then i need to return my eyeballs...

WoodyzSSbee · 05-19-2010, 09:27 PM

Nice Job. Have been looking online at those kits as well. I have to ask, just because either my internet skills suck or I just dont know where to look. Where in the F did you get the BEE-OTCH !!!???? Help a brother out. But seriously you did a great job, whats next.

PWND · 05-19-2010, 09:36 PM

Quote:

Originally Posted by WoodyzSSbee

Nice Job. Have been looking online at those kits as well. I have to ask, just because either my internet skills suck or I just dont know where to look. Where in the F did you get the BEE-OTCH !!!???? Help a brother out. But seriously you did a great job, whats next.

lol.. thanks... try ebay.. that is where I got mine from...

here are a few links to start you off:

http://cgi.ebay.com/BEE-OTCH-AIR-FRE...item23059eaedc

http://cgi.ebay.com/BEE-OTCH-KEYCHAI...item2eacb5dac2

next up... powder coat my wheels, upgrade my noise makers, maybe CAI, and redo leather seats to add some yella...

05-19-2010, 06:48 PM	#1
PWND Drives: 2SS RS M6 Autobot Join Date: Jan 2010 Location: San Antonio, TX Posts: 397 View My Garage	New dash trim & door inserts... ordered my dash/door trim kit back on Feb 18th... got it in last week... finally got around to installing it... it makes a whole bunch of difference... really wish it had come this way... dash trim was super easy to install... only took a few minutes... the door panels were a little bit of a booger to get out... and removing all those damn melted plastic rods that were holding the insert in was a pain... but all in all.. it wasnt too hard... just a bit time consuming... I do wish they used screws to secure the inserts to begin with... being that they send screws to secure the new inserts... would have made it way easier to swap out... but oh well... they are from my phone so they are not the best... but here are some pics... __________________

05-19-2010, 06:51 PM	#2
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,186 View My Garage	looks awesome __________________ Jannetty Racing JRE Street Package

05-19-2010, 07:27 PM	#4
gary bee Drives: 2010 camaro ss/rs IOM Join Date: Jan 2010 Location: Queens,ny Posts: 170 View My Garage	did the new trims come with the lights __________________

05-19-2010, 08:00 PM	#5
SATXLS3 Drives: 2012 GMC Sierra Z71 4x4 Crew Join Date: Feb 2010 Location: San Antonio, Tx Posts: 1,229 View My Garage	Super job Will! Looks nice! U 1 brave dude to tear into them doors! __________________ MBRP 3" CAT BACK, SLP SKIP SHIFT, COLD AIR INDUCTIONS INTAKE, INJEN PRE FILTER, AAC LED PODS, CUSTOM COACH WORKS PAINT,PFADT LOWERING SPRINGS AND SWAY BARS, MRR HR-6 WHEELS, RPI DESIGNS C-6 HIGH RISE SPOILER(AKA RK SPORT 3 PIECE SPOILER)

05-19-2010, 08:03 PM	#6
Atti2de Móderator Drives: 2SS/RS Join Date: Oct 2009 Location: San Antonio Posts: 1,664 View My Garage	THATS HOT! looks good __________________ I'm not the one with the Atti2de problem it's everyone else that has a problem with my Atti2de!

05-19-2010, 07:24 PM	#3
adub4185 Drives: 2010 2SS RS, 2023 Camaro ZLE Join Date: Oct 2009 Location: Dallas, TX Posts: 633	that does look really good. Great job!

05-19-2010, 08:10 PM	#8
camaro5grey Drives: 2014 2SS/RS 6M Join Date: Mar 2010 Location: fort worth Posts: 438	nicely done!!! how much was that kit? and do they have them all colors or certain? im thinkin black?

05-19-2010, 08:15 PM	#9
Green Monster Drives: 2010 Synergy Green, 6-sp auto Join Date: May 2010 Location: Florida Posts: 67	Mine came with the inserts...does look better in color! __________________ Green Monster

05-19-2010, 08:22 PM	#10
alexw It is the year... Drives: 2SS RS Rally Yellow Join Date: Apr 2010 Location: SE PA Posts: 611 View My Garage	In your opinion, is the yellow on the inserts the same color as the Rally Yellow exterior? Can't tell from your pics. I ask because it's called "Scorch Yellow", which is weird to me, if they are in fact the same. __________________ Check us on Facebook for meet dates!

05-19-2010, 09:27 PM	#13
WoodyzSSbee Drives: Rally Yellow 2SS/RS Join Date: Apr 2010 Location: Temple Posts: 246 View My Garage	Nice Job. Have been looking online at those kits as well. I have to ask, just because either my internet skills suck or I just dont know where to look. Where in the F did you get the BEE-OTCH !!!???? Help a brother out. But seriously you did a great job, whats next.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Interior dash trim and door panel / door trim removal instructions	streetjudge79	Camaro DIY & HOW-TO instructions & discussions	87	10-28-2020 04:35 PM
WTB stock silver dash trim	svtjackal	Interior Parts & Accessories	4	03-27-2010 11:48 AM
Trim on the dash supposed to light up?	jaythree	5th Gen Camaro SS LS LT General Discussions	11	02-28-2010 07:31 AM
Do the IOM with IOM interior have IOM door panel inserts, and dash trim?	dragonZ28	5th Gen Camaro SS LS LT General Discussions	14	11-12-2009 10:22 PM
Fabric Dash Trim	UCF w00t	5th Gen Camaro SS LS LT General Discussions	13	03-20-2009 09:33 PM