|06-12-2011, 01:49 AM||#1|
2010 Victory Red 1LT/RS Build Thread [Auto-X & DD]
Hey Everyone, this is Lil' Red, my 2010 1LT/RS Victory Red Camaro. It was #645 off the production line. I'm currently 19, and my parents bought me this car when it first came out. My dad also purchased a 2011 Black 1SS/RS a year later. So, shorty after the purchase of this car, she was in a wreck.
After this was resolved, I began to make her my own. I am now attending the University of Tennessee for nuclear engineering and have recently found an addiction to autocross. I'm running with the ETR group of SCCA for the Spring, but that will probably change when school lets out. Below is a list of my current mods, and upcoming mods. Hope you all enjoy.
Table of Contents
Custom Engine Cover Project (Pg 1) (Post #3)
Autocross Event 7/28/13 (Photo Heavy) (Pg 1) (Post #18)
Tail of the Dragon 10/19/13 (Photo Heavy) (Pg 1) (Post #23)
Engine Bay Lighting Project (Pg 2) (Post #34)
Camaro5 Fest IV 8/1-3/13 (Photo Heavy) (Pg 2) (Post #36)
Opening ETR Autocross Event @ Pellissippi State 2/23/14 (Photo Heavy) (Pg 2) (Post #44)
ETR Autocross Event #2 @ Pellissippi State 3/9/14 (Pg 2) (Post #48)
ETR Autocross Event #3.5 @ Pellissippi State 6/8/14 (Pg 3) (Post #54)
AAC Interior Lighting
AAC Engine Bay Lighting
ACS T2 Front Splitter
Defenderworx Locking Gas Cap
DVS Customs Leather Shifter Boot
DVS Customs Leather E-Brake Boot
Emblempros Black Onyx 3.6L Badges
Emblempros Black Onyx Camaro Badges
Engine Bay Wire Looms
GM Heritage Grille
Headlight Armor Light Tint
IVS Havoc Custom Console Lid
IVS Havoc Custom Seats
Lloyd Custom Floormats
MnP Rear Fascia Blackout
MnP Side Marker Blackout
Rider Graphix Hash Marks
Rider Graphix Front Fascia Blackout
Street Scene Lower Grille w/ Ducts
Unrestricted Motorsports Spoiler
Vinyl Gill Slits
Window Tint 30%
Custom Engine Bay Lighting
Custom Front Wheel Air Deflectors
Custom Painted Intake Manifold
Custom Painted Interior Panels
Custom Painted Tail Light Bezels
Custom Painted Brake Calipers
Custom Painted Rims
Custom Painted Valve Pan Covers
Apex Washer Bottle Relocator
Apex Air Scoop
CAI Cold Air Intake
MRT v2.0 Axle Back Exhaust
VMAX Ported Throttle Body
BMR 1" Front with 1.2" Rear Drop Springs
BMR Rear End Links
BMR Rear Sway Bar
H&R Wheel Adapters 25mm
Pirelli PZero 245/45 20 Square Setup
Hawk HP Plus Pads
New Autocross Numbers
TSW Nurburgring Wheels
SRP Heel Pad
SS Rear Cradle w/ 3.91 Gears
DIY: Cradle Bushing Inserts
BMR Front Sway Bar with Endlinks
Koni Orange Struts
SS Calipers, R1 Slotted Rotors, Goodrich Braided Lines, Hawk HPS Pads, Better Fluid
JDP Brake Ducts
MPD1 Smooth Exhaust Panel
******** Rear Access Bowtie Cutout
Rear Seat Delete
19"x10" w/ 19"x11" Forgestar CF5V Staggered Setup
2014 Front Fascia without RS PKG – 22997719 $343.16
2014 Headlamp without RS PKG - 23187850, 23187851 $261.04 each
2014 Front Fog Lamp – 22830038 $58.14 each
2014 Front Fog Bezel - LH-22829542--RH-22829543 $10.89 each
2014 Upper grille – 22965834 $362.95
BW3 1st Annual "Pedal to the Metal" Car Show (3rd Place)
Chuck Garrett's Moderator Choice Award Camaro5 Fest IV
Front Wheel Air Deflectors
Last edited by Colt; 07-22-2014 at 04:24 AM.
|06-12-2012, 09:35 AM||#3|
Added my new IVS Havoc interior, ACS T2 splitter and my Unrestricted Motorsports spoiler. Working on a new v6 engine cover, and cleaning up my engine bay.
The Engine Cover Project
This project has been put off, since we painted and polished most of what it would have covered.
Instead I decided to go this route:
Last edited by Colt; 11-05-2013 at 09:24 PM.
|06-12-2012, 10:12 AM||#5|
I bought it from Southern Car Parts. I think it is like a $800-$900 kit, but what happened was a guy ordered the kit, then sold his car before recieving the kit, so Southern Car Parts took the kit back for him and had a one time sale price of $700, and thats the kit I got.
It came with Front and Rear Seats, Center Console, and Door/Dash Trim which I didn't install.
|10-26-2012, 03:23 PM||#7|
Drives: The Punisher
Join Date: Oct 2012
Hey man, love the ground effect from the front... It's too damn good!! From where did you get it ?
|11-21-2012, 09:20 AM||#8|
The splitter is the ACS T2 splitter.
|02-01-2013, 09:39 AM||#11|
I am really digging your setup. Are the rims painted black or powder coated? Where did you get them done at? Also, where did you purchase the front ground effect kit from? Nice looking ride.
|02-15-2013, 09:59 AM||#12|
|02-15-2013, 11:27 AM||#13|
SoCal HT5 COTW 4/21/13
Drives: 2011 SS/RS Blown & Cammed LS3
Join Date: Sep 2011
Location: Sandy Eggo
Great job so far man looks great I love that spoiler, keep up the good work
|02-15-2013, 07:35 PM||#15|
Thanks for all the comments, I've just recently installed the MRT v2.0 exhasut, along with Apex's washer bottle relocator and air scoop. All three seem to be great products, and top notch service from Apex Motorsports.
|03-30-2013, 09:27 PM||#16|
Drives: 2011 1LT Black Camaro
Join Date: Feb 2012
Location: Queens, NYC
The DREAM is free... It's the HUSTLE that is sold seperately
|04-11-2013, 10:30 AM||#17|
Thanks for the comments! I want to lower it, but with the roads around here, I would be dragging my front splitter everywhere.
|07-29-2013, 08:38 PM||#18|
Autocross Event 7/28/13
I attended my 4th autocross event this weekend and I'm loving it. I still have a lot to learn about my car and autocross in general but I had a great time. Anyone else autocross on the stock PZeros?
Last edited by Colt; 11-05-2013 at 09:21 PM.
|08-09-2013, 10:24 AM||#20|
Drives: 2010 Camaro 2SS/RS
Join Date: Aug 2012
Location: DuBois, PA
Just so you know man. I have the GM GFX and I just lowered my car on Eibach springs last week. It looks a heck of alot better but still rides higher then a stock Corvette rides. I said the same thing that you did about where I live but I have had no problems at all. I am betting, expecially with your auto cross, that you will love the way the vehicle feels with just the 1" drop.
|09-18-2013, 11:14 PM||#22|
|11-05-2013, 08:59 PM||#23|
Tail of the Dragon
I'm posting these up a little late, but last month I made my first trip out to the Tail of the Dragon, the experience was great. I apologize for the grainy pictures, all I had brought with me was an iPhone. I'm hoping to go back again sometime with a better camera and a GoPro!
We also purchased a couple of photos from the vendors that are set up:
Last edited by Colt; 06-10-2014 at 12:59 PM.
|11-12-2013, 05:28 PM||#25|
Drives: 2010 Camaro, 2006 Z06
Join Date: Feb 2009
Location: SLC, UT
Great photos man - Tennessee is a beautiful place and lots of twisties. We can help set you up on the suspension end of things if you want to knock some seconds off your autocross time. Just hit me up!
|Thread||Thread Starter||Forum||Replies||Last Post|
|All order status requests in here (up to status 3800). List of Order Status Codes.||GTAHVIT||Camaro Price | Ordering | Tracking | Dealers Discussions||53169||02-27-2015 10:31 AM|
|Pyr0b0y's SS Build Thread [COTW 5/23/11]||pyr0b0y||Member Car Journals||825||09-25-2014 01:20 AM|
|Neogenix's 2011 SS/RS BLK/BLK Build Thread||neogenix||Member Car Journals||7||02-27-2011 11:15 PM|
|Missing "Ladies of Camaro 5" thread comment....||Silverado||Off-topic Discussions||2||10-08-2009 01:23 PM|