what is a good blower cam? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bikerbob · 02-01-2012, 09:45 AM

I am working on a 2010 ls3, I have installed a Vortec v3 trim supercharger, a Kenne Bell boost-a-pump, JBA long tube headers with Corsa full exaust and a APC methanol kit. My question is what would be a good blower cam for this set up? I also will be doing a larger throttle body, intake and valve springs at the same time. (any ideas on these parts would be helpfull as well). Thanks in advance for any tips.

The Stig · 02-01-2012, 10:03 AM

Jannetty Racing sells a solid blower cam. AND when you buy a part from them Ted will tune your car for free.

JANNETTYRACING · 02-01-2012, 11:11 AM

Quote:

Originally Posted by stieger

Jannetty Racing sells a solid blower cam. AND when you buy a part from them Ted will tune your car for free.

Thank you for the Recommendation Stieger.

Bob Nice talking with you, I look forward to fulfilling your Goals.

shines · 02-01-2012, 11:21 AM

Quote:

Originally Posted by bikerbob

I am working on a 2010 ls3, I have installed a Vortec v3 trim supercharger, a Kenne Bell boost-a-pump, JBA long tube headers with Corsa full exaust and a APC methanol kit. My question is what would be a good blower cam for this set up? I also will be doing a larger throttle body, intake and valve springs at the same time. (any ideas on these parts would be helpfull as well). Thanks in advance for any tips.

I've got Ted's blower cam and love the mid-high range power it creates. Idle sounds mean as well :-)

JANNETTYRACING · 02-01-2012, 11:49 AM

Quote:

Originally Posted by shines

I've got Ted's blower cam and love the mid-high range power it creates. Idle sounds mean as well :-)

NEGXXIS · 02-01-2012, 12:19 PM

Quote:

Originally Posted by shines

I've got Ted's blower cam and love the mid-high range power it creates. Idle sounds mean as well :-)

I agree...I have the same cam...It ROCKS !!

MudderFinger · 02-01-2012, 12:52 PM

Quote:

Originally Posted by stieger

Jannetty Racing sells a solid blower cam. AND when you buy a part from them Ted will tune your car for free.

I have that cam also, but it is not a solid cam, it's a hydraulic roller cam. It is a great cam and sounds great too.

Darth_Emma · 02-01-2012, 01:16 PM

I used a Livernois stage 2B blower cam. It worked great with my Maggie set up.

JANNETTYRACING · 02-01-2012, 01:19 PM

Quote:

Originally Posted by MudderFinger

I have that cam also, but it is not a solid cam, it's a hydraulic roller cam. It is a great cam and sounds great too.

I think he meant Solid Performing Cam

Padre · 02-01-2012, 01:51 PM

My Lingenfelter GT-9 works for my centrifugal build.

http://www.camaro5.com/forums/showthread.php?p=4411948

I like it because it is a bit unconventional with a wide LSA that gives great idle and around-town driving characteristics. And it's already proven itself (to me) at the track when I was NA, and once I hit the track with the ProCharger, I'm sure it will shine.

Padre

B.Buster · 02-01-2012, 07:13 PM

Ted, which of your cams make more power with let's say 7-8#s. Rough idle or the other.

JANNETTYRACING · 02-02-2012, 08:13 AM

Quote:

Originally Posted by B.Buster

Ted, which of your cams make more power with let's say 7-8#s. Rough idle or the other.

It depends on Which Blower they are coupled with, they are very close.

The Short runner intake Blowers work better with the Smooth Idle.

The Long Runner or stock intake blowers work better with the Rough Idle.

Short runner;
Maggie
Whipple
KB
Lysholm

Long Runner;
Edelbrock
Vortech
Paxton
Procharger

Guys will give up just a few for the Idle which is understandable, the Rough Idle Cam Does have a Certain Cool Factor

Ted.

B.Buster · 02-02-2012, 06:43 PM

Thanks Ted, BTW I have EForce

JANNETTYRACING · 02-03-2012, 09:14 AM

Quote:

Originally Posted by B.Buster

Thanks Ted, BTW I have EForce

Rumpity Rump Rump Rump, go Rough

02-01-2012, 09:45 AM	#1
bikerbob Drives: 2010 camaro ss ls3 Join Date: Feb 2012 Location: orlando fl Posts: 2	what is a good blower cam? I am working on a 2010 ls3, I have installed a Vortec v3 trim supercharger, a Kenne Bell boost-a-pump, JBA long tube headers with Corsa full exaust and a APC methanol kit. My question is what would be a good blower cam for this set up? I also will be doing a larger throttle body, intake and valve springs at the same time. (any ideas on these parts would be helpfull as well). Thanks in advance for any tips.

02-01-2012, 10:03 AM	#2
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Jannetty Racing sells a solid blower cam. AND when you buy a part from them Ted will tune your car for free. __________________

02-01-2012, 01:51 PM	#10
Padre Only drives on Sundays Drives: '16 2SS A8 NPP MRC NGray Join Date: Feb 2011 Location: Dalton, GA Posts: 2,500 View My Garage	My Lingenfelter GT-9 works for my centrifugal build. http://www.camaro5.com/forums/showthread.php?p=4411948 I like it because it is a bit unconventional with a wide LSA that gives great idle and around-town driving characteristics. And it's already proven itself (to me) at the track when I was NA, and once I hit the track with the ProCharger, I'm sure it will shine. Padre __________________ OLD HOTNESS: The "Heretic": '11 2SS/RS L99 A6 Black/Inferno. Build Journal, Videos D1SC GT9 JBA-LT = 720/680 \| 10.330 @ 133.61, 1.546 sixty... Camaro King at ECS V, Darlington. NEW HOTNESS: '16 2SS A8 NPP MRC. Bone Stock, 1/8th: 8.051 @ 89.44, 1.919

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JRE LS3 Rough Idle Hot Street Blower Cam Package	ITGuy11	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	25	07-15-2011 01:22 PM
FS - LEP Blower Cam Kit	chevpwr	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	24	02-27-2011 07:26 PM
ECS Big Blower Cam - Results are in with a solid 51 RWHP gain	robertway	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	13	02-21-2011 10:38 PM
Great results from blower, cam, exhaust package	Jeremy@HOB	Forced Induction - V8	18	03-28-2010 03:35 PM
Initial Results for my TVS / Blower cam install at ADM (586rwhp/577rwtq)	Crowley	Forced Induction - V8	33	08-20-2009 02:08 PM

02-01-2012, 01:16 PM	#8
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 12,996 View My Garage	I used a Livernois stage 2B blower cam. It worked great with my Maggie set up.

02-01-2012, 07:13 PM	#11
B.Buster Drives: 2010 AquaBlue 2SS/RS Join Date: Sep 2009 Location: Long Island Posts: 342	Ted, which of your cams make more power with let's say 7-8#s. Rough idle or the other.

02-02-2012, 06:43 PM	#13
B.Buster Drives: 2010 AquaBlue 2SS/RS Join Date: Sep 2009 Location: Long Island Posts: 342	Thanks Ted, BTW I have EForce