Painted door ABL panels

[2SSRS@Gen5diy]

First you sand the old paint with 400 grit wet sand paper, and work your way up to 2000 grit , its work but it can be done, then apply your color to make it yours.

[sene]

Originally Posted by BBQdDude

Been thinking about getting mine covered in leather.

I covered mine in suede, wasn't too hard.

[Jermola23]

so you sanded behind the stock panels?

[The Stig]

Originally Posted by Jermola23

so you sanded behind the stock panels?

Correct. The stock panels are painted on the back side.

[Jermola23]

So what all did u use? Prep work etc....

[StangKiller-SS]

Originally Posted by 2SSRS

First you sand the old paint with 400 grit wet sand paper, and work your way up to 2000 grit , its work but it can be done, then apply your color to make it yours.

Did you to coat the panel with a adhesion promoter first before paint? Just wondering, I'm am looking to do a test panel like this in IBM.

[Jbcamaro]

Any news on the rear??