Camaro5 SITE 1LE owner VID/PIC thread!!! - Page 34 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

PYROLYSIS · 11-09-2012, 07:47 PM

Quote:

Originally Posted by b4z

Do the tires have built in rim protectors?

Yes.

Doglife1LE · 11-09-2012, 08:38 PM

BLKSS1LE congratulations! Your car looks BAD ASS! Thanks for the pics.

Doglife1LE · 11-09-2012, 08:46 PM

Click pic below for debadging vid I did today:

Nice Video.

SUKXOST · 11-09-2012, 08:55 PM

Quote:

Originally Posted by Doglife1LE

Click pic below for debadging vid I did today.
Nice Video.

Thanks. Pretty easy. Used the same process for the bowtie. I've done this to 3 of my last 4 cars and I love the simple clean look. If you have to look or ask to see what "trim" my car is.....you don't need to know :P

Whole rear debadge took 15min TOPS. You can tell by the vid how easy it is as long as you have the right items.

Tara Martin · 11-09-2012, 10:03 PM

Quote:

Originally Posted by SUKXOST

Thanks. Pretty easy. Used the same process for the bowtie. I've done this to 3 of my last 4 cars and I love the simple clean look. If you have to look or ask to see what "trim" my car is.....you don't need to know :P

Whole rear debadge took 15min TOPS. You can tell by the vid how easy it is as long as you have the right items.

Thanks for the video, Sukxost!

I'm going to take my bowtie off, too. They must be putting the emblems on better these days. A few years ago, we'd get new Impalas in at work and you could pluck off the "Impala" letters with one hand and no heat gun.

Tara

SUKXOST · 11-09-2012, 10:14 PM

Quote:

Originally Posted by Tara Martin

Thanks for the video, Sukxost!

I'm going to take my bowtie off, too. They must be putting the emblems on better these days. A few years ago, we'd get new Impalas in at work and you could pluck off the "Impala" letters with one hand and no heat gun.

Tara

Sure thing. I thought so as well....the quality has improved for sure as far as fit and finish the last few years with the auto industry comeback.

Doglife1LE · 11-09-2012, 10:55 PM

I have have the same heat gun. I used it to debadge my Silverado. What was the yellow card you were using?

SUKXOST · 11-09-2012, 11:02 PM

Quote:

Originally Posted by Doglife1LE

I have have the same heat gun. I used it to debadge my Silverado. What was the yellow card you were using?

Auto zone for less than $4 Basically a lil kit for window tinting. Came with the yellow car and a small box cutter. The yellow card worked perfect, really thin and rounded corners, plus it bent so it helped me avoid certain angles and help pull the badges from the car

LRJet35 · 11-09-2012, 11:09 PM

Quote:

Originally Posted by OzzySS

i've got mine being built next week...don't recall seeing anyone else with yellow and having a sooner TPW...even so, you won't see pics of mine for a while due to shipping to HI

Nice, I ordered the rally yellow as well but won't be seeing it for a while, just placed the order this week. There's some good pics out there of the yellow, but I can never get enough. When I was ordering the car the dealership actually expressed concern over making sure I was committed to the order with a healthy deposit since it was an "oddball" color and package combo

slick rick · 11-09-2012, 11:24 PM

Quote:

Originally Posted by ST1LE

From what I have read it is not good to have it on there unless on the track.

Where did you read that?

ssummit camaro · 11-09-2012, 11:27 PM

Debaging is in the appearance section, stay on topic.

Quote:

Originally Posted by SUKXOST

Thanks. Pretty easy. Used the same process for the bowtie. I've done this to 3 of my last 4 cars and I love the simple clean look. If you have to look or ask to see what "trim" my car is.....you don't need to know :P

Whole rear debadge took 15min TOPS. You can tell by the vid how easy it is as long as you have the right items.

LRJet35 · 11-10-2012, 12:07 AM

Quote:

Originally Posted by slick rick

Where did you read that?

http://www.camaro5.com/forums/showthread.php?t=256656

Says Track use only and not below 32F for the PCV oil seperator

awcarter · 11-10-2012, 12:42 AM

Quote:

Originally Posted by x1sniper3x

My CRT 1LE had a TPW of 10/15 and it was built on 10/29...just gotta be patient. I know it's easier said than done though haha

Where can I pull the TPW from. I ordered mine (what feels like forever ago) but all the information I can get from GM says it is somewhere between cued for assembly and being assembled. Thanks.

OmniCamaro · 11-10-2012, 01:35 AM

No SIM yet?! I have to admit though that BLKSS1LE's car looks really good, and I absolutely despise black vehicles.

11-10-2012, 01:35 AM	#476
OmniCamaro US Veteran Drives: 2011 Silver Ice Metallic 2SS/RS A6 Join Date: Jan 2011 Location: Bossier City, La Posts: 1,407	No SIM yet?! I have to admit though that BLKSS1LE's car looks really good, and I absolutely despise black vehicles. __________________ *Dear Lord, give me the strength to carry on despite my Camaro addiction!* JRE iTSX tune, full cat-less Dynatech exhaust, CAI intake, Stillen Slotted/Drilled Rotors, RB braided brake lines, BMR lowering springs, (reserved for definite future MODS)

11-09-2012, 08:38 PM	#464
Doglife1LE Drives: 2013 1LE, 2004 Silverado Join Date: Sep 2012 Location: East Bay, California Posts: 368	BLKSS1LE congratulations! Your car looks BAD ASS! Thanks for the pics.

11-09-2012, 08:46 PM	#465
Doglife1LE Drives: 2013 1LE, 2004 Silverado Join Date: Sep 2012 Location: East Bay, California Posts: 368	Click pic below for debadging vid I did today: Nice Video.

11-09-2012, 10:55 PM	#469
Doglife1LE Drives: 2013 1LE, 2004 Silverado Join Date: Sep 2012 Location: East Bay, California Posts: 368	I have have the same heat gun. I used it to debadge my Silverado. What was the yellow card you were using?