my camaro has a problem!!! - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

starscream · 10-30-2010, 02:09 PM

yes cyber are my wheels....and seems that the world works in reverse...from you these wheels are expensive but not by me... 1300$ all.. 21x10 21x11..

Revo1 · 10-30-2010, 02:15 PM

Lower that beast! Wheels look great, they'll look alot better with a 1.25" drop!

starscream · 10-30-2010, 02:28 PM

the next expenditure will be to the eibach springs

rtcat600man · 10-30-2010, 03:34 PM

I put Eibach springs on mine to help the look.

http://www.camaro5.com/forums/showthread.php?t=112638

starscream · 10-31-2010, 09:29 AM

grazie mille is a perfect measure!!!!

Darth_Emma · 10-31-2010, 10:38 AM

Lowering springs are your friend. I put Pfadt springs in mine.

WOLFINN_2SS · 10-31-2010, 11:09 AM

Quote:

Originally Posted by starscream

the next expenditure will be to the eibach springs

Cash, Gas & A SS · 06-04-2017, 11:15 PM

Quote:

Originally Posted by SSLarry

I once jacked up my front end to work underneath and when I lowered the car, the front didn't come down to normal height. It was about 2 or 3 inches higher !! When I started driving a bit, it returned to normal height. That was strange. I'll take a pick next time.

Hi,

Has anyone else experienced this? I recently have encountered this issue with the addition of a loud and alarming pop. My ground clearance is now ~6 inches to the bottom of the air deflector widget (front fascia). The wheel gap in the front is 3 inches.

I am very concerned and would appreciate any guidance.

Cash, Gas & A SS · 06-08-2017, 08:14 PM

It seems to have gone back to normal. Crazy how letting springs stretch for only a sort while can have such an effect

riozlander · 06-15-2017, 03:42 AM

well great just found the only rims I want now on my Camaro those look awesome by the way

charles71 · 06-15-2017, 07:13 AM

You did not mention any tire sizes and the tiers also look like they are stretched onto the wheel a little. This would lead me to believe that your tires are to narrow (not wide enough) and the aspect ratio could be bigger too.

10-30-2010, 02:15 PM	#30
Revo1 Don't Like it? Suggit. Drives: 2010 2SS/RS Join Date: Aug 2008 Location: Fresno, CA Posts: 14,832 View My Garage	Lower that beast! Wheels look great, they'll look alot better with a 1.25" drop! __________________ "Tops off, tach up baby- loud and proud!" A Camaro lover from day one- 1996 3.8 V6 Camaro, to 1996 5.7 LT1 Camaro Z28, to the sold 2002 5.7 LS1 Camaro SS, and NOW, a [I]6.2 L99 VR 2SS/RS: XS Power stainless full exhaust, Airaid CAI, BMR drop springs and sways, custom tune by Cal Speed- 411rwhp

10-30-2010, 03:34 PM	#32
rtcat600man having FUN now 13.66@101 Drives: 2010 2LT IOM Join Date: Nov 2009 Location: Clarkston, Michigan Posts: 9,231 View My Garage	I put Eibach springs on mine to help the look. http://www.camaro5.com/forums/showthread.php?t=112638 __________________ MY BUILD

06-15-2017, 07:13 AM	#39
charles71 Drives: 2011 Camaro SS Join Date: Aug 2015 Location: Southern Maryland Posts: 110 View My Garage	You did not mention any tire sizes and the tiers also look like they are stretched onto the wheel a little. This would lead me to believe that your tires are to narrow (not wide enough) and the aspect ratio could be bigger too. __________________ Livernois Stage II Heads & Cam, LS7 Lifters, Ported Intake & Throttle Body, Rotofab CAI, BBK High Flow Fuel Rail @ Guage, Eaton Tru Trac Posi with 3.91 gears, 1000 HP Axels, Kooks Long tubes & full Corsa Exhaust, GM Hurst Short Throw Shifter, Mcleod RXT Twin Disc, Vitesse Throttle Controller, 1.5" Lowering Springs, Strut Tower Brace, SLP 25% Underdrive Pulley, Apex reservoir relocation kit and air scoop.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does the v6 have enough power?	cstproductions	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	305	08-29-2012 10:27 PM
GM unveils Jay Leno Camaro, Camaro Synergy, Camaro Chroma, Camaro Dusk at SEMA	irocnroll	5th Gen Camaro SS LS LT General Discussions	101	02-27-2012 01:25 PM
Gran Turismo 5... No Camaro?	5thGenOwner	5th Gen Camaro SS LS LT General Discussions	111	12-06-2011 11:06 AM
Im sure this has been asked before.. But forgive my innocence :)	gmag21	Suspension / Brakes / Chassis	23	02-21-2010 11:29 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM

10-30-2010, 02:09 PM	#29
starscream Drives: camaro lt 2 Join Date: Jul 2009 Location: italy Posts: 74	yes cyber are my wheels....and seems that the world works in reverse...from you these wheels are expensive but not by me... 1300$ all.. 21x10 21x11..

10-30-2010, 02:28 PM	#31
starscream Drives: camaro lt 2 Join Date: Jul 2009 Location: italy Posts: 74	the next expenditure will be to the eibach springs

10-31-2010, 09:29 AM	#33
starscream Drives: camaro lt 2 Join Date: Jul 2009 Location: italy Posts: 74	grazie mille is a perfect measure!!!!

10-31-2010, 10:38 AM	#34
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 12,996 View My Garage	Lowering springs are your friend. I put Pfadt springs in mine.

06-08-2017, 08:14 PM	#37
Cash, Gas & A SS Drives: --- Join Date: Sep 2013 Location: Canada Posts: 29	It seems to have gone back to normal. Crazy how letting springs stretch for only a sort while can have such an effect

06-15-2017, 03:42 AM	#38
riozlander that guy <-------- Drives: 2012 camaro V6 LS M6 Join Date: Mar 2017 Location: southern Commiefornia Posts: 730	well great just found the only rims I want now on my Camaro those look awesome by the way