Borla S Type with Headers - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

caverman · 08-22-2010, 01:32 AM

Anyone know of some sound clips of a Borla S type with some LT headers and HF cats?

Specifically I'm wondering what a set of KOOKS with the 3" S type would sound like. However I'm also cruious about what the 2.5" would sound like.

PQ · 08-22-2010, 02:10 AM

Quote:

Originally Posted by caverman

Anyone know of some sound clips of a Borla S type with some LT headers and HF cats?

Specifically I'm wondering what a set of KOOKS with the 3" S type would sound like. However I'm also cruious about what the 2.5" would sound like.

I have Borla LTs and S type with NO cats. 2.5" pipes.

Here is a list of video with exhausts.

http://www.camaro5.com/forums/showpo...21&postcount=1

Borla Touring, S-Type, and ATAK Exhaust (Official BORLA comparison video)
Borla Catback Exhaust
Borla Catback Exhaust (2)
Borla S Type Catback Exhaust
Borla S Type axle back exhaust
Borla S Type Cat-Back on a L99 with Roto-Fab CAI
Borla S-Type w/ New ERA OTR Intake and ARH long tubes on LS3
Borla TOURING exhaust on the LS3 with Roto Fab CAI
Borla Long Tube Headers, Borla 'S' Type Catback Exhaust, Fastlane 'Pipeline' Cold Air Intake, T&T Performance Tune. No cats.

caverman · 08-22-2010, 10:58 AM

Quote:

Originally Posted by PQ

I have Borla LTs and S type with NO cats. 2.5" pipes.

Here is a list of video with exhausts.

http://www.camaro5.com/forums/showpo...21&postcount=1

Borla Touring, S-Type, and ATAK Exhaust (Official BORLA comparison video)
Borla Catback Exhaust
Borla Catback Exhaust (2)
Borla S Type Catback Exhaust
Borla S Type axle back exhaust
Borla S Type Cat-Back on a L99 with Roto-Fab CAI
Borla S-Type w/ New ERA OTR Intake and ARH long tubes on LS3
Borla TOURING exhaust on the LS3 with Roto Fab CAI
Borla Long Tube Headers, Borla 'S' Type Catback Exhaust, Fastlane 'Pipeline' Cold Air Intake, T&T Performance Tune. No cats.

Thanks for the links......

So you're pretty happy with your setup?

I'm going to check on the price of what it would cost to get a set of KOOKS and the Borla S cat-back. I'm curious if it's going to be a better deal than the LG setup.

Silver Ice Man · 08-22-2010, 11:09 AM

I am also running the Borla "S" type cat back with the Dynatech LT headers, and high flow cats.
I absolutly love how she sounds,
I would listen to my Camaro over my wife any day.......did I just say that out loud
Got my LT's from Jannetty racing with the SCT tuner, if you go headers youwill most likely need a tune as well to prevent codes from going off.

klatterblast · 08-22-2010, 11:55 AM

Quote:

Originally Posted by caverman

Anyone know of some sound clips of a Borla S type with some LT headers and HF cats?

Specifically I'm wondering what a set of KOOKS with the 3" S type would sound like. However I'm also cruious about what the 2.5" would sound like.

Heres ARH lt's w/cats and 2 1/2 Borla stingers

caverman · 08-22-2010, 02:52 PM

Quote:

Originally Posted by Silver Ice Man

I am also running the Borla "S" type cat back with the Dynatech LT headers, and high flow cats.
I absolutly love how she sounds,
I would listen to my Camaro over my wife any day.......did I just say that out loud
Got my LT's from Jannetty racing with the SCT tuner, if you go headers youwill most likely need a tune as well to prevent codes from going off.

Yes....I'm factoring in the tune as part of the mod. Right now I plan on getting a dyno tune as apposed to using a handheld.

Quote:

Originally Posted by klatterblast

Heres ARH lt's w/cats and 2 1/2 Borla stingers

Nice.....

Are stingers just the axel-back?

papabearcamaro · 08-22-2010, 07:58 PM

I have the exact combo you are asking about. I highly recomend it. Definetly has that "old school" sound to it.
I don't have any sound clips but if you wanted to call I could start the car for you and it would give you a good idea of how it sounds.
Just PM me if you would like.

caverman · 08-23-2010, 12:27 AM

Quote:

Originally Posted by papabearcamaro

I have the exact combo you are asking about. I highly recomend it. Definetly has that "old school" sound to it.
I don't have any sound clips but if you wanted to call I could start the car for you and it would give you a good idea of how it sounds.
Just PM me if you would like.

I'm assuming you have the 2.5" Borla cat-back?

I'm definately going to look into it more. From the videos I've heard I like the LG Motorsports and the Borla setup pretty good. I'm fairly sure the LG cat-back is using Borla mufflers which is why I like it as well. The LG is a 3" cat-back though.

papabearcamaro · 08-23-2010, 03:08 AM

Quote:

Originally Posted by caverman

I'm assuming you have the 2.5" Borla cat-back?

I'm definately going to look into it more. From the videos I've heard I like the LG Motorsports and the Borla setup pretty good. I'm fairly sure the LG cat-back is using Borla mufflers which is why I like it as well. The LG is a 3" cat-back though.

Yes,I am running the 2.5"

PQ · 08-23-2010, 07:22 AM

Quote:

Originally Posted by caverman

Thanks for the links......

So you're pretty happy with your setup?

I'm going to check on the price of what it would cost to get a set of KOOKS and the Borla S cat-back. I'm curious if it's going to be a better deal than the LG setup.

I love it. Loud and deep.

This one mine.

http://www.camaro5.com/forums/showth...37#post2197937

Silver Ice Man · 08-23-2010, 09:52 AM

Here is mine up on the dyno, it is mixed with some music but you can still here the exhaust.

08-22-2010, 01:32 AM	#1
caverman Drives: '69 SS Convertible Join Date: May 2009 Location: DFW, TX Posts: 7,111	Borla S Type with Headers Anyone know of some sound clips of a Borla S type with some LT headers and HF cats? Specifically I'm wondering what a set of KOOKS with the 3" S type would sound like. However I'm also cruious about what the 2.5" would sound like. __________________ *-2010 Camaro* 2SS \| M6 \| VR w/White Stripes \| 1 3/4" KOOKS - 3" Magnaflow \| LPE 3.91 gears \| ADM tuned \| Halltech w/ADM Scoop \| Spohn/BMR Trailing Arm/Toe Rod \| BC Coilovers\| Pedders FE4 ZL1 swaybars \| Cradle/Diff/Radius Rod bushings \| VMax TB \| Morimoto Projectors \| MGW shifter \| Red Calipers Build Journal

08-22-2010, 11:09 AM	#4
Silver Ice Man Drives: 2014 2SS/RS Spring limited edition Join Date: Jul 2009 Location: Drayton Valley, Ab Posts: 492	I am also running the Borla "S" type cat back with the Dynatech LT headers, and high flow cats. I absolutly love how she sounds, I would listen to my Camaro over my wife any day.......did I just say that out loud Got my LT's from Jannetty racing with the SCT tuner, if you go headers youwill most likely need a tune as well to prevent codes from going off. __________________ 2014 2SS/RS, Spring Limited Edition... Ask yourself.....when you turn on your car..... Does it return the favor..... MODS: CIA cold air intake, Oil catch can, Dynatech LT Headers, Dynatech Power cats, Dynatech Cat back exhaust, Janetty racing tune, Vitesse throttle controller, Headlight and marker tint, more to follow....

08-22-2010, 07:58 PM	#7
papabearcamaro Drives: 2012 Chevrolet Silverado 4x4 Z71 Join Date: Dec 2009 Location: WI. Posts: 1,744	I have the exact combo you are asking about. I highly recomend it. Definetly has that "old school" sound to it. I don't have any sound clips but if you wanted to call I could start the car for you and it would give you a good idea of how it sounds. Just PM me if you would like. __________________ SOLD(Traded for 2012 Silverado Z71 4x4 and 2012 Sonic Hatch.)...2010 Camaro 1SS/RS/LS3,yellow with House of Kolor Tangerine Pearl rally stripes,manual trans.Hurst short throw shifter,4 pack rally gauges,Roto-Fab air intake,Kooks long tube headers with high-flow cats,Borla S-Type catback exhaust,Comp Cam,PRC ported heads,Maggie with 3.6 pulley and 1:1 cog drive,secondary fuel system with 65lb injectors,ADM digital A/F and Boost gauge,Pfadt trailing arms and subframe bushings.614.25rwhp/566.82rwtq on 8# of boost. 2012 Chevrolet Silverado 1500 EX.Cab 4X4 Z71.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Borla S Type	Black Widow	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	8	08-10-2010 09:13 AM
Installing Borla catback "S" type exhaust...questions	Jojo	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	14	07-31-2010 08:44 PM
HP gains from Borla S type.	TheKid_28	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	9	03-10-2010 02:38 PM
JBA releases exhausts, headers and midpipes.	Bewenched	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	17	09-16-2009 04:04 PM
Borla Long Tube Headers	cm5217	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	3	08-31-2009 01:59 PM